Jump to content
SAU Community

Problem Fitting Aftermarket Wheels

mkn23
 Share

Recommended Posts

mkn23 Collaborator

mkn23

Posted
Posted

So I picked up a used set of wheels, Rays Gram Lights 18x7.5 +47 with 245s all round for a good price but I'm having fitment issues. Tire clearance is perfectly fine but actually fitting the wheels on isn't.

To my knowledge the stud pattern is 5x114.3 so the rears fit fine apart from my lug nuts which don't seem to fit or lock, correct me if I'm wrong but we can't use OEM nuts and the thread pattern is 12x1.25? And I got the Rays Dura Aluminium for like $50, probably replicas but I don't mind (unless that's the reason they won't lock on properly).

The front rotors have this extra half stud thing, did a bit of research and it looks like it's in the place of the rotor lock down nut, the rear rotors have a flat bolt/screw that is flat on the plate whereas the fronts in the same area is protruding outwards.

Just wondering if you guys have any solutions before I hassle my mechanic with changing my tires...

Cheers guys

Link to comment
https://www.sau.com.au/forums/topic/458552-problem-fitting-aftermarket-wheels/
Share on other sites
Lakes101 Experienced

Lakes101

Posted
Posted

Take some pics of the rotor hats and studs to help us help you. And yep I reckon the issue is with the cheap knock off lug nuts you bought. I have used cheap ones before on my first car and never again they stripped the threads as they are weak and the thread pitch is not correct and off centre, which lead to loosing a rear wheel around a corner!! Not fun stay away from cheap lug nuts mate as I learned they literally have your life riding on them

Nightcrawler Grand Master

Nightcrawler

Posted
Posted

Why on earth would you buy such evil offset wheels? The rears will actually sit another 6mm further inside the guards than even stock wheels :yucky: . People normally put on wheels with 50mm wider track to give the car some stance - not actually fit worse offset wheels. These will look beyond shit, I am sorry to tell you. I would be checking your strut clearance, especially on the rear - I wouldn't be surprised if they are hitting, and that is what is causing your fitment issues.

  • Like 1
mkn23 Collaborator

mkn23

Posted
  • Author
Posted

Not really going for the stance look, if I wanted I could just run some spacers maybe but they're my first non OEM wheels for cheap so I'm not fussed. Fronts are +45 and rears are +50, so I assumed +47 would be suitable in the middle of the two.

I'll give it another shot tonight with some more tools (and sleep) and take some pictures.

Any recommended lug nut brands? Not looking to fork out huge amounts of money but a reliable and decent looking set would be nice. And also would it better to be open ended or close ended?

GH05T Grand Master

GH05T

Posted
Posted

if I wanted I could just run some spacers maybe but they're my first non OEM wheels for cheap so I'm not fussed.

get fussed, its more important that you realise, it will look arse, track worse and be less safe than stock aswell as illegal.

im not the nanny police when it comes to wheels but your actively taking a step backwards for no viable reason.

mkn23 Collaborator

mkn23

Posted
  • Author
Posted

So after further research, the half nut out front is just a dummy nut removable with the right tools and effort.

And I've decided to run 20mm bolt on spacers all round, would that make the fitment 'decent'?

colin.ssc Mentor

colin.ssc

Posted
Posted

So after further research, the half nut out front is just a dummy nut removable with the right tools and effort.

And I've decided to run 20mm bolt on spacers all round, would that make the fitment 'decent'?

You'll be fine. Just make sure the spacers are done properly and redone after driving a few hundred kms.

I run 25mm front and 20mm rear with OEM wheels. Yes they are probably illegal but most mods are illegal unless you get a certificate.

  • Like 1
mkn23 Collaborator

mkn23

Posted
  • Author
Posted

You'll be fine. Just make sure the spacers are done properly and redone after driving a few hundred kms.

I run 25mm front and 20mm rear with OEM wheels. Yes they are probably illegal but most mods are illegal unless you get a certificate.

which brand spacers did you get?

Spacers are illegal in Australia.

everything fun is illegal in Australia.

Nightcrawler Grand Master

Nightcrawler

Posted
Posted

If you have an accident and they realise you have spacers on (which they WILL) your insurer will not pay you a single cent, as you have contravened all laws by running spacers. Plenty of people do it, but be warned.

Just buy the correct offset wheels and be done with it.

colin.ssc Mentor

colin.ssc

Posted
Posted

which brand spacers did you get?

H&R trak+ drm

Yes please be aware it is illegal and insurers can try screwing you over for using them.

I am just sharing what I use and it is for me personally and whatever you take out of it is your responsibility and i will not be responsible for anything that happens.

mkn23 Collaborator

mkn23

Posted
  • Author
Posted (edited)

Update:

I've fitted the wheels and nuts and it looks okay...bit tucked in so I'll be going with the 25mm spacers from gktech

At first the fronts were making a strange noise but I tightened the nuts and it was all good but the rears eventually made a rubbing, squeaking noise every time I braked, checked the rotors and it seemed something on the pad was somehow scratching the rotor, brought to the mechanic right around the corner because I my normal mechanic was booked out till next week and the guy said it just needed to be machined again as it was done properly, so I just let him do his thing to get it over and done with. Picked it up the next morning, the guy said he fit a smaller spacer (wot? didn't realise there was a spacer) to fix the noise but there was some noise still evident but he just said it just needed to be bedded in so off I went and with more driving the noise got louder so now I'll be leaving it on Monday to see what the issue is.

And before I went to the mechanic, I put my stock rears back on and the same sound could be heard so it wouldn't be the wheels.

Here's a pic

wvqwk0.jpg

Edited by mkn23

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Slight brake pedal stutter after new pads

      By MBS206 · Posted

      What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • bcozican
      R32 Gtst - Track Car

      By bcozican · Posted

      Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • PranK
      Slight brake pedal stutter after new pads

      By PranK · Posted

      Thanks, will do that.  Thankfully they still feel great.
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • GTSBoy
      Slight brake pedal stutter after new pads

      By GTSBoy · Posted

      It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...