Jump to content
SAU Community

Recommended Posts

Nahhh Darren, no man on man here mate!!! Sorry to disappoint haha. Anyways, so Darren do autos pull all over the shop in kws? Ps. I will have more than 2 grand for modding, just over a few months or so. I really don't want to go manual-but if huge difference in kW capabilities then maybe think about it. Or try rb25/30 on auto with built box

Just so you're aware a built auto box is around the $3-4K mark just for the box and that's generally on exchange basis.

For what it's worth I wouldn't bother with a stock box, either plan to build one from the outset or buy a manual car. I've got an early model RE4R01A auto box behind a 25/30 making 180rwkw but a lot of torque (lucky to be 300hp at the flywheel) with a shift kit and the box lasted 2000km before destroying the brake band. A later model RE4R01A like what comes in the R33/R34 is a little beefier with wider bands but it'd do the same thing eventually. I picked up a stronger RE4R03A and will try that with a shift kit but if it dies I'm putting the 25DET manual box in that's sitting under the bench as I can't justify sinking 4 grand into an auto box.

Cheers XR Pilot. But damn...3-4k for 2'000 km. it's a little disappointing to hear & only 180rwkw(sorry no disrespect XR). I was hoping for a lot more, like "Satanics" r34 project-I know it was a rb26/30 but still he kept it tip tronic & hit high hp. He did have hiccups though

Nahhh Darren, no man on man here mate!!! Sorry to disappoint haha. Anyways, so Darren do autos pull all over the shop in kws? Ps. I will have more than 2 grand for modding, just over a few months or so. I really don't want to go manual-but if huge difference in kW capabilities then maybe think about it. Or try rb25/30 on auto with built box

Im not disappointed, i like vags..

Just trying to explain to you that wilst you may be able to have the money to modify the car by doing porn, you will also probally give up the right to float wilst swimming to get it..

And the autos suck..stupid f**king lock up converter is shite ,get a th400 or glide

cheers

darren

Edited by jet_r31

Cheers XR Pilot. But damn...3-4k for 2'000 km. it's a little disappointing to hear & only 180rwkw(sorry no disrespect XR). I was hoping for a lot more, like "Satanics" r34 project-I know it was a rb26/30 but still he kept it tip tronic & hit high hp. He did have hiccups though

Just to be clear - that was a shift kitted STOCK auto that lasted 2000km - which is why I said plan on getting a proper built auto or just get a manual car. Also it's "only" making 180rwkw on 9psi on a STOCK R33 turbo. The car was built for daily duties and I have no doubt it'd be far quicker than a 300rwkw RB25 in point-and-squirt style traffic driving. It makes over 100rwkw at a bit over 2000rpm.

I haven't read back to see if it has been asked already but what are you trying to build the car for exactly? Drags, drift, circuit racing, daily driver? Not trying to be harsh but you need to figure that out before you a) spend any money and b) decide you need a 600hp auto Skyline.

Im not disappointed, i like vags..

Just trying to explain to you that wilst you may be able to have the money to modify the car by doing porn, you will also probally give up the right to float wilst swimming to get it..

And the autos suck..stupid f**king lock up converter is shite ,get a th400 or glide

cheers

darren

hey Darren, now I know what you're talking about, powerglide & th400. know them as 2 & 3 gear upgrades. How are they for Street driving ?

Are u looking to sell by any cance? Colour, kms, condition???

I had considered selling the entire box and transmission setup if the torque converter I am getting built doesn't end up doing what I want the car to do very well

(someone may want it for a different application, i.e drag)

But in all honesty, get the manual

If you would like to me expand on it, you should really, really, really get the manual.

To expand further, the gearbox has cost me closer to 10K to get it to where it is, which is good, but unless the TC from TCE makes it better than a manual (arguable!) you're at least, least, least spending 10K to get to the level where a $0 manual gearbox is at.

get the manual

To find out floor it till it swings a leg out of bed!!! Then back off 10% to be safe!!!

A manual RB25 can take 300rwkw and still be reliable. A NEO will - superior head - do a bit more.

Having said that I have now very likely angered the gods and mine will stop suddenly sometime soon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...