Jump to content
SAU Community

Review: Alpha Omega Racing 350mm Brembo Front Brake Adaptor Kit

timmy_89
 Share

Recommended Posts

timmy_89 Mentor

timmy_89

Posted
  • Author
Posted

Nice looking kit, were the bolts 12mm or 14 though?

Different kits/cars require different bolts - mine uses 14mm bolts

What size rims do you have, and how much clearance between the caliper & rim barrel? The AO website says minimum 17", but I'd be surprised if they would fit - more likely 18" needed?

I run 18's, I use both stock R34 GTR rims and Concave Concept CC03R in 18x9. I have seen the setup with 17's but you would require a race-style 17's which provide maximum clearance.

Out of interest... Can you pull the ABS fuse and do a session and offer feedback?

If I remember next time I'm at the track I will see what I can do :)

GTR_JOEY Grand Master

GTR_JOEY

Posted
Posted

Your original question was, will they fit behind a 17. If the website says it does then why would you be "surprised it fits"

Would have taken you less time to search what the standard Evo wheels are

Don't get cranky when it's easy to find the correct answer, especially since ITS ALREADY ON THE WEBSITE!

GeeDog Experienced

GeeDog

Posted
Posted (edited)

I run 18's, I use both stock R34 GTR rims and Concave Concept CC03R in 18x9. I have seen the setup with 17's but you would require a race-style 17's which provide maximum clearance.

Thanks - just changed from 18's to 17's on the track car to get the tyre sizes we wanted, but would love to put the brembos on.

Edited by GeeDog
GeeDog Experienced

GeeDog

Posted
Posted

Your original question was, will they fit behind a 17. If the website says it does then why would you be "surprised it fits"

Would have taken you less time to search what the standard Evo wheels are

Don't get cranky when it's easy to find the correct answer, especially since ITS ALREADY ON THE WEBSITE!

Perhaps you should read my original question again - doesn't mention "behind" anywhere. I asked about the clearance between caliper and barrel - ie diameter. The standard Evo wheels mean nothing - this kit uses calipers from early models and rotors from newer model, with a third party bracket. Thanks for the excellent info provided though, EVEN IF IT IS ALREADY ON THE INTERNET!!! Don't you be asking anyone for info again will you (particularly just after they've offered to provide it)?

PranK Grand Master

PranK

Posted
Posted

Guys, I will get the :ban: stick out if you keep talking shit in here. Take it to the Wasteland and discuss or argue till your heart's content.

  • Like 1
timmy_89 Mentor

timmy_89

Posted
  • Author
Posted

Thanks - just changed from 18's to 17's on the track car to get the tyre sizes we wanted, but would love to put the brembos on.

What 17's are you running? Here is a pic with some 17x9 Enkei's fitted over the kit - http://alphaomegaracing.com/image/data/productimages/evo350brembo/wing.jpg

I'm sure if they are a known brand rim Alpha Omega would probably be able to advise if they will fit over the kit, you may need to be cautious of wheel weights though.

timmy_89 Mentor

timmy_89

Posted
  • Author
Posted

Forgive my ignorance, but why weight? Too much for the hat?

the little lead weights that are sometimes stuck on the inside of rims to balance them ;)

Correct, I'm referring to the lead weights used for balancing wheels when you get tires fitted :)

PranK Grand Master

PranK

Posted
Posted

OOoooooh thats great! I was sitting here wondering how a wheel can be too heavy for a brake disk! haha :huh:

Thanks for not destroying me. :):/

  • Like 1
GeeDog Experienced

GeeDog

Posted
Posted

We've got 17" Enkei's - RP01's - so might be a goer.

I put an Akebono BBS on a 350GT a couple of years ago, didn't think to look where the weights were. They came off the first time the wheel rotated. When I got them re-balanced I got the weights put out of the way of the caliper. Interestigly they were also 350mm rotors, but even the stock 350GT rims didn't fit over the front calipers - missed by about 1-2 mm. I used a set of 350Z stock rims and they had plenty of clearance.

Prank - put the stick away - I'm done with it. Just get a bit sick of reading meaningless replies, and was in a bad mood yesterday after dealing with retards all day. Getting too old and grumpy for this shit.

  • Like 1
  • 4 years later...
Darmanin10 Mentor

Darmanin10

Posted
Posted

@timmy_89

I'm about to put this kit and the rear WTAC kit on my car. 

Looking at going the attkd 2 piece rotors after reading what you have posted here.

I wanted to ask where and how much the brake lines were to get made? Or is it easier to just pay the $270 for front and rear lines from Alpha omega?

Tobz Community Regular

Tobz

Posted
Posted
On 28/07/2020 at 12:16 PM, Darmanin10 said:

@timmy_89

I'm about to put this kit and the rear WTAC kit on my car. 

Looking at going the attkd 2 piece rotors after reading what you have posted here.

I wanted to ask where and how much the brake lines were to get made? Or is it easier to just pay the $270 for front and rear lines from Alpha omega?

Have you asked AOR for a package deal or seen if they are doing any group buys? I saved a heap by emailing them and found out a group buy was underway

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...