Jump to content
SAU Community

Recommended Posts

2015 AGM & 2016 SAU-VIC Committee Elections

Location: Bridie O'reillys

Address: Brunswick

Date Wednesday 9th of December 2015

Start 7PM

Meeting 8:30PM

Meeting End 10:00PM

The 2016 SAU Vic elections will be held via AGM at the December Club Meeting on Wednesday 9th of December 2015

At this meeting, the new Committee for 2016 will be elected the annual report and financial position of the club will be presented.

All Committee positions are up for voting and nomination.

However it will only be the Executive Committee who gets voted in on the night of the AGM.

The Executive committee will then pick the general committee as they see fit from the members who are nominated here.

Nominations can only be made by financial members of SAU-Vic.

If you would like to be involved on the Committee, please nominate yourself. If you think someone else would be great in a Committee role - please nominate them.

For a nomination to be valid it must be seconded by a current Club Member and the person must accept the nomination.

Don't be scared - this is a great way to get more involved with your club. The Committee is currently structured as such:

Executive Committee roles:

President

Vice President

Secretary

Treasurer

General Committee roles:

Social Events

Motorsport Events

Again, this is a great way to be a part of your club. All current financial members are eligible.

All committee members have to stand down and be re-nominated and re-elected - so everyone has the ability to be involved.

Please post any queries or nominations in this thread.

Role Descriptions

Executive Committee roles:

President

This is the clubs leader. This person is responsible for the clubs "public" face appearance.

Their responsibility is to ensure the club is heading and following the direction that the members want.

They should also show good leadership examples to other committee members and delegate tasks to the general committee.

The President should endevour to run all of the monthly general meetings.

Vice President

This is the clubs second in command role. This person is responsible for day to day running of the various "departments" of the club.

They act as a fill in for when the President is absent from meeting, events and other appearances.

They also cover any absences for any decision making requirements and processes.

Secretary

Responsible for all club mail, notices, memberships, member enquiries, member questions and bulletins.

The secretary should also track our various club affiliation agreements (insurance etc) and ensure all of the club information is up to date and correct.

The secretary should also handle all memberships add/changes/deletes

Treasurer

The treasurer is responsible for the clubs trading funds and bankroll.

It is their responsibility to ensure funds for events, purchases, stock, merchandise, deposits etc is handled correctly.

All money transfers, transactions, purchases need to be logged and recorded for our regular balance checks and yearly reviews.

This person has direct access to the SAU bank account and financial data.

This person is called upon also when cross planning events and new ideas to ensure adequate funds and capacity is available.

As we are non profit car club this role is very important and all steps must be taken to protect the clubs money.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/461007-2015-agm-2016-commitee/
Share on other sites

I might start things off by saying I would love to keep doing what I have been for the club. Been an awesome year 2015 and look forward to helping out in the year to come :)

Otherwise my nominations are

President - John.R

Secretary - Robyn.R

Treasurer - Tony.T

  • Like 1

Oh hi!

Not sure if i have time to be the 'Actual' treasurer position. But always happy to assist in preparing the Financials for the relevant governing bodies :thumbsup:

Happy to nominate:

President - Richo (if he has the time??)
Vice President - Tony O
Secretary - Robyn R

  • Like 2

Out of curiosity, aside from the voting process, how is succession planning done? i.e.: if the President feels they only have one year left in them, are they proactively switched with the VP if the club agrees?

I'll be there.

Also keen to help out again for next year. With DECA getting off the ground the Motorsport looking to be stronger again - I'm keen to land sponsorships etc

Out of curiosity, aside from the voting process, how is succession planning done? i.e.: if the President feels they only have one year left in them, are they proactively switched with the VP if the club agrees?

That's usually left up to the current Pres, but yeah that is what has occurred in the past and what I did with Richo.

He was well across the Pres requirements before I stood down. Has done a great job since and has been SAU-Vic's longest standing Pres too!

That said, it still goes to the vote at AGM.

  • Like 1
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...