Jump to content
SAU Community

Recommended Posts

There is a limited auto selection that can been used for auto conversions in GTR's, the easiest conversion is using the auto from a Stagea 4WD but you wont get 5-6 gears.

From there upwards in power capacity there are stronger auto transmissions however expect even less gears.

The biggest cost is taking a auto and adapting it to take the GTR transfer case and bolt straight on, not a cheap exercise.

Your better off getting a built Stagea 4WD auto as most of it just bolts straight up, reducing the amount of engineering involved to make it work.

There is a limited auto selection that can been used for auto conversions in GTR's, the easiest conversion is using the auto from a Stagea 4WD but you wont get 5-6 gears.

From there upwards in power capacity there are stronger auto transmissions however expect even less gears.

The biggest cost is taking a auto and adapting it to take the GTR transfer case and bolt straight on, not a cheap exercise.

Your better off getting a built Stagea 4WD auto as most of it just bolts straight up, reducing the amount of engineering involved to make it work

i assume your talking about the M35 transmission? how much power would that be able to handle roughly

Edited by JosephFoley440

WC34 (WGNC34 as Kiwirs4t pointed out), they ran the 2.5L straight 6, bolts straight to the rear of a RB26....obviously you will need the RS Four 4wd transmission to remain 4WD.

The M35 models got a V6 and it wont bolt up from my understanding.

I wouldn't think the M35 trans bolts up - he would be talking about the WGNC34 trans.

Frankly I would give the R32 a miss and look for a small auto performance car.

WC34 (WGNC34 as Kiwirs4t pointed out), they ran the 2.5L straight 6, bolts straight to the rear of a RB26....obviously you will need the RS Four 4wd transmission to remain 4WD.

The M35 models got a V6 and it wont bolt up from my understanding.

thanks for the help man much appreciated ill do some research

Kiwirs4t whys that man i know a lot of people are disappointed to see a auto GTR but I've always wanted to own one so i figure why not :)

That is trick but the box alone is $15k-$30k plus the padel air shift unit

c34 4wd stadea box would be the most cost effective way to do it

Then there is a company in sydney that make a T350-T400 auto adaptor kit to suit the GTR but these are really a race application setup

thanks for the help man much appreciated ill do some research

Kiwirs4t whys that man i know a lot of people are disappointed to see a auto GTR but I've always wanted to own one so i figure why not :)

I don't have an objection to an auto GTR (I know some people do) but its more that you will need to go to a lot of trouble and expense to get an auto that will hold a lot of power. Also when you go to sell it after getting bored with being out-dragged at the lights by Honda Civics (unless you stall it up and do a full noise launch which can get a bit tiresome/embarrassing) you won't get your money back.

  • Like 1

Yeah I agree, the stagea box will be fine unless you are putting out some serious numbers, it will be by far the easiest option to fit and wire up.

And I reckon, if you want a GTR and you need an auto, go for it! It's your damn car, do what you like

  • Like 5

I would think the stag box would be plenty strong enough for a stock 32 GTR for cruising duties

Obviously if he wanted to race the car it would need something stronger like the TH350-400 or even 700 might be enough once built

Well the OP did say 400-500Hp, the stag box built should be good to a reliable 450 (abused) from what ive read about them.

If he wants more power than that, then open the cheque book and look at the T400 option for reliability.

It really does come down to his need due to his disability and his power goal.....everyone should have the right to do what they want to their car.

If he is concerned about reliability, dont constantly rape the car racing everyone.......lots of people out there running lots of power on stock manuals but they dont clutch dump and bang the gear shifts, avoiding the need to buy a OS88.

  • 4 weeks later...

The biggest issue you'll face is that the auto is controlled by the ecu. You could run the 26 off the 25 ecu with either an SAFC to put 2 afm signals into 1 or a selin dual maf translator kit. There is some jiggery pokery to get the tps and iac to work correctly on the 26 using the 25 computer.

The up side is that series 1 auto stageas go for next to nothing for one that has a ratty body.

You could even set the auto up on an aftermarket controller, but I'm uncertain on cost.

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...