Rb 2860-5 Highest Hp?

[r32-25t]

1000cc injectors is way to small for 500kw on e85.....

Or at least a Aussie 500kw that is.

this finally someone hit the nail on the head

But we are comparing American pony power vs Australian horse power

[fatz]

most gtrs shit the bed at 400rwkw with valve float as well

i know mine does

[Hadouken]

This set-up has a 3" exhaust?

Come on.

Please run down the 1/4 and report back.

[XKLABA]

Odd..... I have made over 900whp on a 3" exhaust. Even that much must cover our apparent over zealous dynos.

No, not really but it does give a better idea of how different USA and AUS dynos read

[Hadouken]

Another question.... How can a 33 be imported to the states? It's minimum a 1995 model...

[mr skidz]

Odd..... I have made over 900whp on a 3" exhaust. Even that much must cover our apparent over zealous dynos.

I think low 500 horse power at the wheels on a gtr your pushing shit uphill with a 3 inch exhaust!

how you achieve an extra 400 horsepower Power from the same size exhaust has me wondering if mushrooms are to blame [emoji23]

[Jc052685]

Didnt say i made 900 on a gtr. Just that it was through a 3" exhaust.

[mr skidz]

You're still 200 horsepower off the Mark with that 3 inch exhaust

Edited February 18, 2016 by mr skidz

[XKLABA]

Didnt say i made 900 on a gtr. Just that it was through a 3" exhaust.

What did you make 900hp in with a single 3" exhaust

[Jc052685]

2010 Camaro

[Hadouken]

Took it down the 1/4?

[Jc052685]

Took it down the 1/4?

Still have some things to do before the Gtr will be able to hit the track

[Hadouken]

Sorry, I mean that camaro. I'm interested in what it trapped

[Jc052685]

Sorry, I mean that camaro. I'm interested in what it trapped

Sorry but no. That car was built for speed competition such as standing mile events (see: The Texas Mile). The car did 168mph at the half mile & 203.8mph at the mile marker.

We have another camaro that made a touch over 750whp. Also through a 3" exhaust, it frequents the 1/4 mile often. Best pass to date on a stock short block & stock auto trans is 10.3 @ 137mph @ 4160lb

That car has a similar turbo system as the higher power car, just a much smaller Precision 7175 turbo.

Edited February 18, 2016 by Jc052685

[Duncan]

I just dropped by to say I'm surprised how civil this all is....keep up the good work

a -5 power thread in forced induction is like throwing e85 on a fire normally

[sneakey pete]

Not sure itd be easy to go to the strip in the states in winter, think we'll have to be patient to see what it does

[Chris32R]

Even that's pushing it

Ive made 400kW with id1000 injectors on E85 with -5s. I think there was a bit left in them too because the tuner didn't mention anything about them being maxed out

[XKLABA]

I just dropped by to say I'm surprised how civil this all is....keep up the good work :)a -5 power thread in forced induction is like throwing e85 on a fire normally

So it burns slower, cooler and more consistent

[XKLABA]

This is the best result i have seen, this engine is about as built as they get,

2.8 stroker

Naprec/HKS prepped and ported head with OS valves

260 x 10.85 custom cams with very serious springs, forget brand

Port matched manifolds attached to Racepace modded -5s

Full maf less hard pipe kit from air box to plenum

Nismo intercooler and Nismo Plenum

ID2000s with twin 044s on a custom surge tank

Ross trigger wheel setup

And twin 3" exhaust

Plus heaps of supporting gear

Just got the OK to post this from the owner ?

[Hadouken]

At least a 1000hp in the Northern hemisphere :-P