Jump to content
SAU Community

Recommended Posts

Good morning all.

My R32 GTR is now no longer on daily duties and has become the weekender it deserves to be. This amongst some other things has prompted me to look into freshening up my insurance policy. I for one do not like to be the that guy who gets caught out if the worst were to happen to my car.

as we all know recently the USA has started to take all the Japanese export R32 GTRs and have driven the price up allot as expected. as their limitations lift over the next few years the R32 and R33 GTRs will get harder to replace.

this can be seen already, I have just done a search on carsales. 2 years ago the average value would have been $17-23k. some cheaper bad examples, some higher priced ADM and highly modified cars.

now, and have a look for yourself. the cheapest 32gtr is $24000... that's the cheapest. the average is now as im writing this post $34000. that's the average taking out anything over $50k or ADM.

Mine is clean and relatively unmodified... its at least still insurable. so if I were to replace my GTR I would expect, if i bought from carsales (which is how just car get their averages when agreeing on a value most times) I would be up for about $30-$34000.

that's not including on roads and my excess of about $1k. so lets say about $35,000.00

hows that for a jump in values. now im not looking at this as a wide eyed kid thinking my cars worth whats its not, im just looking at the averaged from available value. but im confident could get $30k for my car if sold today.

so, I have contacted my insurer who currently has a value in the low 20s with a $900 excess, that's just car. im now looking into what they can do with the agreed value, pointing them to do their own market research and with the explanation of the USAs influence on the import value and looking at what the limited insurance market can offer in competition.

also they have an agreed value as I said, but their market value is $17000 btw, probably relevant when I bought it but ... imagine trying to get a 32gtr for $17000 today, gumtree shitter maby....

My question...

what value do you have your GTR insured for?

im asking specifically for R32, but R33 and 34 are not about to start dropping any time soon.

are you insured for what it would costs you to replace or within reason? who did you use? ...discuss :)

ill post back my results to btw so others know what's available or at least realistsic, it would be good if we got some info on this for values, premiums are too hard cos everyone's situation is different but hopefully no one gets caught out and given a cheque for half their cars value when paying for an agreed amount they didn't research.

Edited by GH05T
Link to comment
https://www.sau.com.au/forums/topic/464155-r32-gtr-insurance-values/
Share on other sites

I'll play

R32 GTR insured value $40k

$500 excess

Would it replace what I have spent - NO.

Could I get $40k, at todays market value, likely be close to that.

Insured through Shannon's.

Comes out of the garage about 30-40 times a year.

I have started talking with shannons. They have a value off the bat up to 25000 atm. Keep in mind, mainly stock 89,

I am going to go through all the mods and see if i can push that up. The new haltech might add a grand.

Moved my 1990 GT-R to Shannons this month.

Spent about 30 mins on the phone with underwriter. Started at 21k. Went to 25k once he started looking at comparable cars on Carsales. He upped it to 30k when I explained the engine had been rebuilt etc. It seemed like a reasonable way to work through it.

Based on this, I will do some research leading up to renewal next year to see where prices are at.

30k would not come close to covering what I have spent buying and having built - that is a different story - but it is a lot closer to buying something comparable than I would have been previously.

The underwriter just glanced over mine briefly when I had in at the shop. Mines still running stock motor but I gave him a list of items I've got on it totaling more than what they're covering me minus the vehicle cost.

the difference in premium from 20k to 25k was about 120 bucks over the year. If i'm paying around 2k anyway, another 6% is worth the 5k extra coverage.

I upped mine to 22k from 18 about a year ago, If it were to get written off or stolen I wouldn't replace it, would be just glad to get back what i brought it for initially (18k 3 years ago) anything more than that would be a bonus and go towards the reimbursement for the 15 odd grand i have spent fixing everything.

Varies a lot. How many have actually been seen by an assessor and do they know what they're looking at?

Any vehicle with defects rendering the car unregisterable would the Insurance company not pay out?

I don't have any concerns but I bet the majority do. Lol

Edited by Sinista32

Mine did, I wasn't certain if they knew what they were looking at but did provide a list of parts that have gone on and the costs.

I think they were just making sure it wasn't some clapped out crapbox that wasn't worth what they were signing up for.

I should up it to $40k given that it won't replace it but get much closer than the current $25k

  • 2 weeks later...

Agreed value of $25k (1989 R32 GTR - rebuilt motor) - Shannon's. Going to speak to them soon and look at agreed value of $30k.......

As you've mentioned $25k wouldn't come close to replacing my car now......Thanks for the gentle reminder ;)

  • Like 1
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...