Jump to content
SAU Community

Recommended Posts

Hi :) 

I decided to post this thread, my car was building about 3 years. Rest u will see on photos :D

I live in Poland so LHD conversion MUST BE to fast & safe driving :(  Car is already done, i have many pictures from building.

Beginning:

IMG_0512_zpsa2ac6db2.jpgIMG_0558_zpse4992301.jpgIMG_1030_zpsd2d2343b.jpgIMG_1036_zpsad70797a.jpgIMG_1304_zpsf9cb92e9.jpgIMG_1318_zps861689db.jpgIMG_1327_zps0ca88b62.jpg 1Jtjzgd.jpg 46eUtpd.jpg mEIHygQ.jpg E5HOlxS.jpgIMG_1338_zps78382b05.jpgIMG_1339_zps130dc87f.jpgIMG_1340_zpsb6e7dca4.jpgIMG_1413_zps002d1483.jpgreceived_m_mid_1406645037385_e6afba4abe2 bjAAbKV.jpg10689455_948104588548359_7247749791840731525749_948104628548355_6148150290046482  10807917_992677014091116_1595544020_n_zp 10818569_992676964091121_2049336383_n_zp

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/466392-street-r33-gt-r-lhd/
Share on other sites

And mapping, car spec for 2015 :

Engine:
*Turbo BorgWarner S300SX 83-75 91. A/R Twin Scroll
*ECU EMU (Bluetooth to Nexus 7 + Boost Controller + AFR + IAT)
*High performance coil pack (blue one)
*Injectors DENSO 800cc
*Fuel pump Aeromotive 340 Stealth
*Water cooler Mishimoto 52mm
*Fans Cosswortch
*Clutch OS Giken Twin Plate
*Connecting Rod Bolt Kit ARP 202-6007

Suspension:
*Coilover Tein MonoFlex 8/7
*Rear strut brace HKS
*Full polyurethane bushing kit

Intake:
*Air filter AEM 21-3059DK
*FMIC 600x300x76
*Bov Tial 44mm

Exhaust:
*Exhaust manifold Twin Scroll
*Exhaust JASMA 3-3.5"
*Westgate Tial 60mm

Brakes:
*Calipers form Cayenne (360x30 IS-F front discs, 350x20 370z rear discs)
*Brake pump BM57
*Brake proportioning valve - Tilton

Exterior:
*Wheels JAPAN RACING JR3 19x10.5j et.22
*Tyres Michelin Pilot Super Sport 265/35/19
*Steel wheel nuts - TPI
*Headlights lens LHD
*Colour Jupiter Red from new AMG

Interior:
*Nexus 7 II in 2 DIN place (gauges and music)
*Steering wheel R34 GT-T
*Short shifter
*Air conditioning
*Cockpit s14&r33
*Alcantara headlining and sun visors + S15 black OEM Light units

Sound:
*Front speakers - Morel Dotech Ovation 6
*Amplifier - u-Dimension ProX 500.24 AYA
*Speaker cable - Prolink OFC PRO CAV1003
*Signal cable - custom Klotz MY206 + Neutrik Connectors
*Sound deadening (bulkhead, cockpit, floor, roof, rear fenders, doors) - Dynamat SuperLite (over 40 mats) + foam GMS 3mm & 10mm

lK7Lrl2.jpgoaGKIYm.jpg

 

And the car look like that:

LEEnqrg.jpgvi1bDQ3.jpg5UAukKT.jpgHjTKSNG.jpgppT3LeV.jpg

And few details :)

GenidxR.jpgYOuWqSD.jpgr0q6tog.jpg

And some photos with my friend S15 Spec-R :)

rsN6rpB.jpgQ3KIxyc.jpgZVt3xmL.jpgDdkFlHC.jpg3nH0dpS.jpg2ZzazJz.jpgJL3o0NE.jpg

Edited by Snara
  • Like 9

And again mapping :)

Actually car spec:

Engine:
*Rods Bridgeway H-Beam
*CP Pistons
*Turbo JRspec GTX3582R BB .82 t3 undivided
*Cams HKS SS 264
*ARP 202-6007 + ARP ARP-202-4207
*ACL Race con rod + main 
*Cometic 1.3mm head gasket
*Nitto oil pump
*Intake manifold Greddy
*Harmonic balancer Ross Tuffbond
*Trigger KIT
*ECU EMU
*Coil packs 
*Injectors DW 680cc
*Fuel pump Aeromotive 340 Stealth
*Water cooler 52mm
*Fans Spal's VA09-AP12/C-54A
*Clutch Competition Clutch Twin Disc 4-60452-C
*Aeroquip + AN


Suspension:
*MeisterR Zeta-R
*Cusco Rear Camber Arms
*All possible polyurethane

Intake:
*Air filter AEM 21-3059DK
*FMIC 600x300x76
*Bov HKS SSQV

Exhaust:
*Exhaust manifold divided handbuild by GGarage
*Exhaust custom 3" + middle muffler Magnaflow and rear HKS Priest
*Wastegate Tial MV-S

Brakes:
*Front Brembo 18ZL/18ZR + 360x30 | Rear Akebono 370Z + 350x20 disc
*Brake pump BM50
*Tilton brake valve

Exterior:
*Wheels JR3 19x10.5j et.22 + front spacer 15mm and rear 8mm
*Michelin Pilot Super Sport 265/35/19
*Bixenon lens LHD
*Colour Jupiter Red from MB AMG
*Fender Washers
*Auto Select Devil Wing
*Nismo Rear Wing End Covers
*Nismo Clear Front Side Indicators
*Spatsy R33 GT-R V-Spec
*Carbon cooling panel

Interior:
*Steering wheel R34 GT-T
*Nismo Quick Shift Kit
*Air conditioning
*Cockpit s14&r33
*Alcantara headlining and sun visors + S15 black OEM Light units
*Defi boost gauge

Sound:
*Headunit Asus Nexus 7 II
*Front speakers - Morel Dotech Ovation 6
*Amplifier - Emphaser EA 4100-500
*Subwoofer Gladen SQX 12"
*Speaker cable - Prolink OFC PRO CAV1003
*Signal cable - Prolink Futura FTC101
*Sound damping (bulkhead, cockpit, floor, roof, rear fenders, doors) - Dynamat SuperLite + foam GMS 3mm & 10mm
*Bosch S5 74aH

9oIlnQi.jpg8YV9M7n.jpgrSqyMMG.jpg

It take a while, but dyno tell the truth :P

NzHJ2mL.jpg

Car driving amazing :) Have a lot of power, have insane sound - quiet but in WOT afrer 4500rpm is freaky ****ing looooud 
At the days we adjust cams so i hope spool will be about 400 rpm better :P

0wRU8Lv.jpg

And some photos from car show in my city:

XWRl0eD.jpgQo3Fr99.jpg5I6HrMB.jpg

M7JEitI.jpg

And we go on biggest JDM car show in Poland - JapFest:

A4Sy9sX.jpgd5qEJVY.jpg

And on place :)

ZDzabRN.jpgIvCJwOu.jpgkoJNCJo.jpgWLwuudK.jpg15d502d1216e7.jpg517763a2970d3.jpgb742b6313403c.jpg6e13272e90b07.jpg142395c8849f1.jpge4dc7a911be81.jpg

e5c2a617c0b08.jpgc318e95370401.jpg

Afterparty :P

EGuyTjC.jpg

Edited by Snara
  • Like 4

Amazing work, well done!! Thanks for sharing.

The dyno sheets seem to list power as 'km', do you know the hp/kw figures?

Also what's the registration process like in Poland, is it hard to get/keep a car like this registered?

52 minutes ago, k_d said:

Car looks fantastic!!!!

Love the attention to detail.

Thanks :) Doing the best i can.

48 minutes ago, Duncan said:

holy shit! great work doesn't even start to cover that!

what was the firewall from, out of interest? And is it a totally custom dash?

Thanks :D

Firewall is from LHD 200sx s14 p&p, center of dash is from s14 and sides from r33 and after we made one piece from fiberglass.

34 minutes ago, V28VX37 said:

Amazing work, well done!! Thanks for sharing.

The dyno sheets seem to list power as 'km', do you know the hp/kw figures?

Also what's the registration process like in Poland, is it hard to get/keep a car like this registered?

Thanks :)

Dyno show power on the engine KM=HP, 635HP = 520AWHP

Process of registration isn't soo hard, it take about 1 month waiting for permission from ministry of infrastructure :)

13 minutes ago, Roy said:

Looks liek an S14 dash. Great work!

 

Strippers look about as good at washing cars as junkies windscreens in Melbourne :)

Yes, center is from s14 and sides from r33, it looks very well passed :P

Haha :D VERY nice look, i can watch that movie again and again :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...