Jump to content
SAU Community

Recommended Posts

CTP Savings At Last in NSW Whilst With NRMA VVC

We've known for a while now that Shannon's offers discounts on CTP Renewals on cars that are insured by Shannon's. We also know how horrendously expensive CTP Premiums are, for reasons we can discuss elsewhere.

Now, NRMA Vintage Veteran and Classic are upping the ante. But there are hoops your need to jump through...

So, pay attention!

 NRMA%20VVC-2_zps2q27hsuz.jpg

 

The original NRMA VVC Invoice has been destroyed (by an NRMA office worker), but as you can see, on the accompanying form, I've written down $758 as being the Premium Due for my CTP Renewal.
On the original Invoice, it states that there is no accompanying NRMA Insurance that would ordinarily reduce the CTP Premium.
That's because NRMA is slow in linking the VVC arm to its CTP Renewals.

If I had paid online, I would have had to pay $758. If I had paid by phone, I probably would have paid $758. If I had paid at Australia Post, I definitely would have paid $758.

Now for the kicker...

 NRMA%20VVC-1_zpsdtz2qb67.jpg

 

By paying at an NRMA Branch - and here's the important bit... - asking to adjust the CTP Premium because the car is insured with NRMA VVC, I have saved $280!!!!!!
Now I don't need to tell you that $280 can buy me a degustation meal for two at Tetsuya's. But hey, you have better things to do with $280 than by an empty-nester like me!  

 

 

 

  • Like 5

Awesome stuff Terry!! Thanks for sharing.

I wouldn't mind lining up at an NRMA branch to save that kind of money. Although most of the times I've gone into an NRMA branch, the most I've had to wait is a couple of minutes.

  • Like 1
  • 2 weeks later...

I tried this with my renewal coming up. $900 for CTP this year (metro Sydney, male, aged 25) and I was keen on the saving. Got to the branch and asked about it, they said "no" immediately because there's nothing they could do about my age. They mentioned that I wouldn't see any savings on CTP until I'm 30. Tried again on the phone with NRMA VVC and they said the same thing. I'll try again next year I guess. 

  • Like 1

After recently going through the NRMA claims process after hitting a kangaroo and the entire repair process taking 6 weeks to repair a headlight, passenger side guard and bonnet on a Toyota Avalon, I would trust any insurance company underwritten by IAG with extreme scrutiny. I was promised that the repairs would be completed by a certain date and because it wasn't I now have a car over 1000kms away from where I now live with no practical means of getting it to me... :glare:

25 minutes ago, salavace said:

I tried this with my renewal coming up. $900 for CTP this year (metro Sydney, male, aged 25) and I was keen on the saving. Got to the branch and asked about it, they said "no" immediately because there's nothing they could do about my age. They mentioned that I wouldn't see any savings on CTP until I'm 30. Tried again on the phone with NRMA VVC and they said the same thing. I'll try again next year I guess. 

Damn, doesn't sound like ill have much luck then.. 

On 10/29/2016 at 10:20 AM, Terry_GT-R34 said:

I wonder if other states have links set up between NRMA VVC, RACV VVC, SGIO VVC etc and their CTP section???

 

QLD appears to however through a different mechanism, for regular ol' me it's $380 state wide for Class 1 (i.e. Car and stationwagon) interestingly there is a class for  vintage, veteran, historic or street rod motor vehicles' which is $75... whether your car would qualify for this or not I do not know...

 

  • Like 2
4 hours ago, niZmO_Man said:

Parents have been with NRMA for decades, had a couple of claims, no issues (had hire car so no loss of transport).

I'm glad your folks have had a good run with NRMA, mine has just been an ongoing headache! Loss of transport wasn't our issue, they promised that the car would be repaired before we permanently moved to QLD, and because it wasn't we had to abandon the car and I now have to sell the car via proxy. Had they been upfront with the possibility of a delay I would have slapped a wrecker headlight on it and dealt with the rest of the repairs in QLD.

To be honest, it has been many years since parents made a claim. One claim was a "disabled" person on a motorised scooter running through a busy roundabout and hitting the rear guard of my mum's Commodore. Took two years but NRMA sorted that out (won the case). Oh Police charged my mum with neg driving for doing literally nothing wrong (she paid the fine for some reason). We had problems with the painter not matching the colour right (it was Botanica Mica) but that was between painter and my dad (NRMA preferred repairer), my dad got him to repaint it for free and it was sorted then.

So hearing your story I'm actually not surprised. Were they waiting for Nissan to get the parts or something? They always give it to the cheapest quote if you don't use your preferred and that shop can stuff everyone around.

52 minutes ago, niZmO_Man said:

They always give it to the cheapest quote if you don't use your preferred and that shop can stuff everyone around.

This is probably where I went wrong... It was their "NRMA approved" repair centre in Rosebery... 

It was a 2000 Toyota Avalon and the story they gave me that they received a guard that was also damaged from a wrecker and I got this news the day before we were moving. This news also came after they had the car for a week and after they first inspected the car two weeks prior. NRMA / IAG took the stance of "we aren't at fault so we aren't doing anything about it"

Now this was all over a sub $5k car, if I had to go through the same process with my old Skyline that I was unreasonably and emotionally attached to I would have properly lost my shit

  • 1 month later...
On 11/14/2016 at 8:25 AM, salavace said:

I tried this with my renewal coming up. $900 for CTP this year (metro Sydney, male, aged 25) and I was keen on the saving. Got to the branch and asked about it, they said "no" immediately because there's nothing they could do about my age. They mentioned that I wouldn't see any savings on CTP until I'm 30. Tried again on the phone with NRMA VVC and they said the same thing. I'll try again next year I guess. 

Same here.

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had another look at the car and I noticed the fuel pump isn't priming on ignition. I'd taken out the pump from the boot to siphon out the old fuel, so maybe I've knocked something loose or broken a wire putting things back together. Will go back with a multimeter and try to work out what's stuffed. Kinda hoping it's the pump itself thats gone so I can upgrade it
    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
×
×
  • Create New...