Jump to content
SAU Community

Recommended Posts

Injector loom modified, injectors fitted, splitfire coilpacks fitted & engine loom wiring in progress...5947b1ec03160_enginewiring.thumb.jpg.f8cefb44982d82e0f6b0358dd8aa012e.jpg

 

Ditched the thermofans as they weren't really keeping temperatures under control, back to engine fan but a bit too close for my liking... 

radiatior.thumb.jpg.e7e3ef1fdf510d68e56c602244f833b8.jpg
Have purchased GKTech engine fan which supposedly is thinner & more efficient (win-win) - on its way....

Dummy-fit the top intake manifold & Neo engine cover to see how it will all look. So far so good! Couple of hoses on their way from Japan to finish the intake plumbing...

enginebay.thumb.jpg.09d4bfd1a7805bacfe6a1e2b94bf0277.jpg

 

Hopefully finish-off the wiring by next weekend & get the car ready for some intercooler, intake pipe & dump/front exhaust fabrication!

  • Like 1

Loving the progress, making me lean more and more to doing a neo rather than a standard RB25! you had any real difficulties with the wiring so far? or has it all been pretty straight forward?

  • Like 1
9 hours ago, DaymoR32 said:

Loving the progress, making me lean more and more to doing a neo rather than a standard RB25! you had any real difficulties with the wiring so far? or has it all been pretty straight forward?

Wiring still in progress but a lot trickier than a s1 rb25 motor.

The neo loom has so many plugs for TCS, ABS, Sensors, Headlights, etc so its been slow progress to work out which to keep & which to cut.
So far, Ive worked out that the rb20 ecu grabs ignition voltage near the plug at the airbox and its a matter of wiring this to the brown eccs/ign relay & another pin on the ECU.
Im trying to make sure aircon, power steering, hicas, wipers & all dash switches/sensors work with the Neo so am tracing each wire to each plug and working through it slowly.

The Knock subloom on the r32 is separate and connects into the rb20 engine loom; whereas the Neo knock loom is integrated into the Alternator subloom; still working out best way to connect into the Neo loom.

  • Like 1
  • 2 weeks later...

Working on all the little-bits to make the car go...

Time to flex!

flex.thumb.jpg.e1dbc17fcf1f7f18257bb0a1719b33c0.jpg

Nothing beats new parts...replacing the coolant lines.
hose.thumb.jpg.296e9697706cab1a03c6e2282ec8cffb.jpg

New clutch slave cylinder with custom hose

IMG_9971.thumb.JPG.d61e12cf09deb490f0aa235bdcf4ac0d.JPG

Tailshaft shortened, balanced & fitted.

IMG_9970.thumb.JPG.8851623f4d4b0b380d2b0ea81c55ea7e.JPG

Replaced the 30mm Turbo spacer with a 20mm spacer, much  better fitment now, hopefully the dump/front clear the aircon lines now...

IMG_9974.thumb.JPG.27932da9edd752b114bdfb91476f6e39.JPG

With a 7ltr ASR extended sump, means more oil - bought enough for two changes & gearbox oil to suitoils.thumb.jpg.6e066d3e750d15669343cb30b8c2ae10.jpg

 

Hopefully next week we will be in a stage to fire-up and see if my wiring has been done right!

  • Like 5
  • 2 weeks later...
On 7/14/2017 at 5:34 AM, rx-line said:

What compression pistons?

 

Specifications
Part Number: SC7297, 14028-6
Make: Nissan
Engine(s): RB25DET NEO
Year(s): 1998-2002
Piston Material: 2618 Aluminum
Bore Size: 86.50mm
Compression Ratio: 9.0:1 CR
Connecting Rod Material: 4340 Forged Steel
Connecting Rod Length: 121.50mm
Compression Height: 1.220"

Wiring loom finally sorted and Nistune + flex board soldered in.
Despite AFM plugged in, larger injectors on a stock map and no intake pipe connected, the engine cranked & started!

Car will be towed to fabricator and tuner on Monday, hopefully have a running car this Friday if all goes to plan :)

wiresin.thumb.jpg.d9c90506c7a00179a901d7331eb91613.jpg

  • Like 4
  • 2 weeks later...

Some fantastic work done by Havoc Fabrication, their attention to detail, care and professionalism is above all else. Thanks to their workshop for tackling this mammoth of a job.

  • Custom stainless steel intercooler piping with zero holes cut
  • Custom stainless steel intake pipe from z32 airbox
  • Custom stainless steel dump & front pipe with another cheeky o2 bung for wideband sensor/tuning

A couple of wiring gremlins to sort out last minute but the car is ready for run-in tuning this Monday :D 

IMG_0253.thumb.JPG.df2c73e86926f8d6589777f19adc973e.JPG

IMG_0254.thumb.JPG.888f79943bbcf86d6353b61670440b3a.JPG

IMG_0255.thumb.JPG.a4f754876681589a9074f6f37c38adc8.JPG

IMG_0257.thumb.JPG.0a207cae6ba6dcce116a9cb7c6a8d137.JPG

IMG_0258.thumb.JPG.d0701d7f2e9f2872564c6d1268114363.JPG

IMG_0260.thumb.JPG.e9d5552f25d3cccfc4197f54071b3a24.JPG

  • Like 6

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...