Jump to content
SAU Community

Recommended Posts

5 hours ago, Dose Pipe Sutututu said:

Subtle lol...

You used the word brilliant many times lololol

Wasn't me, but a close relation....

You'd be more interested in the car he replaced this with - an N55 335i AH3

Edited by GeeDog

On November 22nd 2018, I put an order for a GTX3576R Gen 2 supercore from Sparesbox.

Sparesbox then went all quiet for about 3 weeks, I then contacted them and they advise there will be a delay (thanks for telling me anything). Due to the lack of communication, they offered me a $35 voucher. Sure whatever, it's end of the year not like I'm going to work on my car anyhow lol

Fast forward a few weeks, Pxxx (trying to hide names) called me and she advised me GCG (their supplier) is unable to provide me the turbo bought, so the alternative was to bump me up to a GTX3582R Gen 2. A bit hesitant at first, I eventually agreed to go a tad bigger.

So, last week I received a package on Friday, excited I opened it and look what arrived ?‍♂️20190113_112207.thumb.jpg.06d94d86fd246bbb9bbc2a8723a2b1ce.jpg

So yeah, I got what I wanted nearly 2 months ago, but... I've ordered a 0.83 housing because I thought I was getting a GTX3582R Gen 2 not a GTX3576R Gen 2. If I was definitely getting a GTX3576R Gen 2, it would be a 1.01 housing not a baby 0.83.

So f you Sparesbox.

 

  • Like 1

Well... You said you wanted more response for skid pans. Maybe they heard you and this is they're way of helping you out.

 

When are skid vids of gtx3576 gen2 goodness scheduled?

 

 

13 minutes ago, Dose Pipe Sutututu said:

On November 22nd 2018, I put an order for a GTX3576R Gen 2 supercore from Sparesbox.

Sparesbox then went all quiet for about 3 weeks, I then contacted them and they advise there will be a delay (thanks for telling me anything). Due to the lack of communication, they offered me a $35 voucher. Sure whatever, it's end of the year not like I'm going to work on my car anyhow lol 

Fast forward a few weeks, Pxxx (trying to hide names) called me and she advised me GCG (their supplier) is unable to provide me the turbo bought, so the alternative was to bump me up to a GTX3582R Gen 2. A bit hesitant at first, I eventually agreed to go a tad bigger.

So, last week I received a package on Friday, excited I opened it and look what arrived ?‍♂️20190113_112207.thumb.jpg.06d94d86fd246bbb9bbc2a8723a2b1ce.jpg

So yeah, I got what I wanted nearly 2 months ago, but... I've ordered a 0.83 housing because I thought I was getting a GTX3582R Gen 2 not a GTX3576R Gen 2. If I was definitely getting a GTX3576R Gen 2, it would be a 1.01 housing not a baby 0.83.

So f you Sparesbox.

 

Moar raspanse, No Ragrats.

Keep the .83!

27 minutes ago, admS15 said:

Well... You said you wanted more response for skid pans. Maybe they heard you and this is they're way of helping you out.

 

When are skid vids of gtx3576 gen2 goodness scheduled?

After Spool Imports decide to actually identify the gears I installed are theirs. The idiot sales guy said the gears I put in aren't Spool Import gears ?‍♂️

f**ken hell brah. This is why i don't want to let the Nissan out.

Sales guy needs a kick in the arse.


After Spool Imports decide to actually identify the gears I installed are theirs. The idiot sales guy said the gears I put in aren't Spool Import gears [emoji2357]


Sent from my A1601 using SAU Community mobile app

20 minutes ago, r32-25t said:

Was your reply, “then whose gears did you sell me?”

Nope, sent a photo of the gears from new.

No response today... sigh, should have bought a M4.

I waited almost 6 months for sparesbox to supply my EFR6758 and it was an absolute f**k around. I only paid $1900 for it. Ended up cancelling because they told me it would be a 9 month wait from that point (at the end of the 6 months). Cancelled the order and they refunded the money with no voucher or anything.

Purchased 6758 the next day for ~$2800

Sparesbox ring me the week later saying they just got their order in. I said ill take it still because it was so cheap. They don't agree to the $1900 that i was supposed to pay (was purchased during a sale) and want to charge me $3k

f**k sparesbox

40 minutes ago, iruvyouskyrine said:

I waited almost 6 months for sparesbox to supply my EFR6758 and it was an absolute f**k around. I only paid $1900 for it. Ended up cancelling because they told me it would be a 9 month wait from that point (at the end of the 6 months). Cancelled the order and they refunded the money with no voucher or anything.

Purchased 6758 the next day for ~$2800

Sparesbox ring me the week later saying they just got their order in. I said ill take it still because it was so cheap. They don't agree to the $1900 that i was supposed to pay (was purchased during a sale) and want to charge me $3k

f**k sparesbox

that's f**ked, and so obvious that they were doing everything they can to get out of honoring that sale price. I'd be reporting that shit to the ACCC

Guess I'm the odd man out.

I've only had good dealings with SparesBox.

However, I've only been buying basic service and repair items - with the exception of a billet girdle which they had a killer price on and shipped in good time.

21 minutes ago, GTofuS-T said:

that's f**ked, and so obvious that they were doing everything they can to get out of honoring that sale price. I'd be reporting that shit to the ACCC

ehhh my CBF factor is maximum. Was like 1.5 years ago now anyway.

49 minutes ago, ActionDan said:

Can they swap the rear housing for you? 

Ordered it through someone else, worked out cheaper.

Trying to see if I can exchange 

So.. some updates, returned the 0.83 for a credit note and will be using that towards a turbo drain, lines/fitting kit, etc.

Also ordered the 2nd revision of Spool Import gears, hopefully it doesn't need to come out again. 

Lastly, come to an agreement with Sparesbox, they're doing their best to rectify the poor experience and making it up to be by shopping a rear housing at a reduced cost.

Guess that worked out ok, just in time for CNY.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...