Jump to content
SAU Community

Recommended Posts

Doing some basic tuning for now, double demerits too so don't want to risk my license.

Cars running on 7 month old E85, and seems to have developed a misfire with 1.4bar boost and above.

It's recently also got R35 coils and I've dialed up the dwell however it's still missing.

About 1.2/1.3bar it seems "ok", but I'll get it back on 98RON for a bit to clear up the system.

1bar at ~4000rpm

image.thumb.png.6c553ad9ecd2e555268ad51a9a3fca6a.png

1.3bar at ~4300rpm

image.thumb.png.975c0044d6f0b4eb1c0b8dfe0ab3dd6e.png

Noting the AFRs are shit house and I probably could still feed it a good amount of timing. Good to be behind the wheel again, and fuuark the dose is so good.

It sounds like a bus dosing, just goes suuuuuuuuuuuu when you back off lol

  • Like 1
23 minutes ago, Dose Pipe Sutututu said:

Back to reno photos, stone is now in.

Without doors 

20190610_090917.thumb.jpg.a7ea14c50989ae5d58cb6f7dc045434f.jpg

 

With doors 

20190610_100450.thumb.jpg.93001dd69a13863b72dc80ca766b7547.jpg

Looks mad, how many Litres/KG of load so you get with that washer? Have you thought of tuning it a bit to get some more spins out of it? 

21 hours ago, Murray_Calavera said:

That was a bit of a tease, let's see the timing table as well lol

Ask and you shall receive :)

Base Table

image.thumb.png.639569abc55c4b7d0f2e0171222ba818.png

 

Compensation Table aka E85 table

image.thumb.png.bb1523cffb0ef82ca342598aa181df2b.png

  • Like 1

Came to check out the car. Strangely intrigued by the laundry.
Where can I get some of that gourmet xúc xích pâté?
Sullivan's Cove, quite difficult to come by. How is it compared to the French Oak? Looks fancy.

Haha that pate was made by my wife and I at the Agrarian Kitchen in Tasmania, 2 day cooking class.

I actually got the bottle at Sullivan's Cove (as in the distillery itself). I can't remember the taste now lol.

Anyhow, one more laundry photo lolol.

20190615_180403.thumb.jpg.85b9148645e6a02f8ff894910eaf3240.jpg

  • Like 1
18 minutes ago, Ben C34 said:

When that laundry is 400mm underwater the tiles will fall off and you won't be able to sell your house ever.

Not sure I get what you're trying to say?

2 hours ago, Ben C34 said:

When that laundry is 400mm underwater the tiles will fall off and you won't be able to sell your house ever.

This isn't a don mega laundry. 

This is bok choy laundry. 

  • Like 2
  • Haha 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • What are you thinking makes a sequential shit to drive on the street? About the ONLY thing I can think of, is if you're wanting to be able to roll up to lights in third or second and pop it straight into neutral, or you want to come down two or three gears, say out of 5th and back to second, but they shift quick enough it doesn't really matter
    • I'm not a drag racing guy, but that was a good watch. Didn't Ibrahim's car have some cooch! But the big question is....WTF is with so many of them running without seatbelts!
    • Sequential Is fine to drive on the street
    • Well that is not a sign of good quality..  Understand, but not so nice to drive on the street I suppose and out of my price range..
    • I recently got myself a 1989 r32 GT-R and it has some slight smokiness from the exhaust and misfires sometimes when coming off the throttle. I'm looking for a good mechanic in the Brisbane region who will do a good job on it. It'll need a diagnosis, and most likely an engine rebuild with refurb/stock parts (not looking for a motorsport build... yet). If anyone has done something like this before/knows stuff about this in terms of who can do it and how much it cost, I'd like to hear about it. I was looking on the forum and I found some posts from 2020 that were similar to this, but it has been a while since then so if anyone has any updated info that would be great.  I'm also new to the forum so if this topic should be in a different place please let me know. Thanks in advance!  
×
×
  • Create New...