Jump to content
SAU Community

Recommended Posts

Doing some basic tuning for now, double demerits too so don't want to risk my license.

Cars running on 7 month old E85, and seems to have developed a misfire with 1.4bar boost and above.

It's recently also got R35 coils and I've dialed up the dwell however it's still missing.

About 1.2/1.3bar it seems "ok", but I'll get it back on 98RON for a bit to clear up the system.

1bar at ~4000rpm

image.thumb.png.6c553ad9ecd2e555268ad51a9a3fca6a.png

1.3bar at ~4300rpm

image.thumb.png.975c0044d6f0b4eb1c0b8dfe0ab3dd6e.png

Noting the AFRs are shit house and I probably could still feed it a good amount of timing. Good to be behind the wheel again, and fuuark the dose is so good.

It sounds like a bus dosing, just goes suuuuuuuuuuuu when you back off lol

  • Like 1
23 minutes ago, Dose Pipe Sutututu said:

Back to reno photos, stone is now in.

Without doors 

20190610_090917.thumb.jpg.a7ea14c50989ae5d58cb6f7dc045434f.jpg

 

With doors 

20190610_100450.thumb.jpg.93001dd69a13863b72dc80ca766b7547.jpg

Looks mad, how many Litres/KG of load so you get with that washer? Have you thought of tuning it a bit to get some more spins out of it? 

21 hours ago, Murray_Calavera said:

That was a bit of a tease, let's see the timing table as well lol

Ask and you shall receive :)

Base Table

image.thumb.png.639569abc55c4b7d0f2e0171222ba818.png

 

Compensation Table aka E85 table

image.thumb.png.bb1523cffb0ef82ca342598aa181df2b.png

  • Like 1

Came to check out the car. Strangely intrigued by the laundry.
Where can I get some of that gourmet xúc xích pâté?
Sullivan's Cove, quite difficult to come by. How is it compared to the French Oak? Looks fancy.

Haha that pate was made by my wife and I at the Agrarian Kitchen in Tasmania, 2 day cooking class.

I actually got the bottle at Sullivan's Cove (as in the distillery itself). I can't remember the taste now lol.

Anyhow, one more laundry photo lolol.

20190615_180403.thumb.jpg.85b9148645e6a02f8ff894910eaf3240.jpg

  • Like 1
18 minutes ago, Ben C34 said:

When that laundry is 400mm underwater the tiles will fall off and you won't be able to sell your house ever.

Not sure I get what you're trying to say?

2 hours ago, Ben C34 said:

When that laundry is 400mm underwater the tiles will fall off and you won't be able to sell your house ever.

This isn't a don mega laundry. 

This is bok choy laundry. 

  • Like 2
  • Haha 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
    • What do the spark plugs look like after you tried to start it with everything connected?
×
×
  • Create New...