Jump to content
SAU Community

Recommended Posts

Looking to Buy R32 GTR Need advice

so I have been in the market for a R32 GTR for the past few months now and and still undecided on what to do.

would it be better to buy a gtr that is in need of some work and fairly stock for $20k, or buy one with new paint, built motor, 300kw at wheels etc for 35k?

doing rust repair and gettting a new paint job wont cost me much a am close friends with someone in the trade.

how much would it cost roughly to get 300kw at the wheels? 10k?

 

thanks a lot in advance for your replies

Link to comment
https://www.sau.com.au/forums/topic/468943-looking-to-buy-r32-gtr-need-advice/
Share on other sites

needs work in one area usually means needs work in maaaaaaany areas. 

$30k on a vg condition "lightly modified" car and then spend money on basic go fast bits, ecu fuel system turbo ect.

Want advice when looking to buy an R32 GTR?!

Best piece of advice I heard many years ago was:

'If you can't afford to buy two of the R32 GTR's you want, then don't buy one!'

So very true...but do I regret buying one? Not for a second...

23 minutes ago, mr_rbman said:

Want advice when looking to buy an R32 GTR?!

Best piece of advice I heard many years ago was:

'If you can't afford to buy two of the R32 GTR's you want, then don't buy one!'

Is this true? I always thought it was what some owners say too 'Blow their own horn'.

i bought mine and promptly needed to spend maby 5k on random stuff. heater hoses, brakes, tires, this that something else, and nothing really gone wrong with mine.

 

i budget for either an engine rebuild along with new things like turbos and supporting mods ect as the engine will be out anyway.

or a gearbox rebuild + rear subframe out including diffs suspension bushes swaybars ect because again your half way their, 

either way have $10-15k up your sleeve or available for when it does happen... not if....when.

 

their almost 30year old highly strung sports cars which were always bought as sports cars, their not gonna be cheep.

Quote

'If you can't afford to buy two of the R32 GTR's you want, then don't buy one!'

Can confirm, my car is already racking up bills like the turbo runs on $100 bills. It's not like it even goes anywhere!!!

Still, it's sweet to know it's mine. If it were me, and I were new to GTRs (which I was/am) go for the better quality one.

16 hours ago, dyl33 said:

Is this true? I always thought it was what some owners say too 'Blow their own horn'.

Perhaps a slight exaggeration especially in todays market where a typical example fetches mid 30's...but as Glyn has pointed out they are nearing 30 years in age and were basically a supercar when released, they weren't bought just to putt back and forth to the shops typically ;)

Basically what I was getting at is if you're scraping together every last cent to buy one then it's probably not the car for you, you need to prepare for the inevitable maintenance issues at a minimum (heater hoses etc...) then you get hit with the 'GTR' tax on most things you buy...

 

7 hours ago, mr_rbman said:

Perhaps a slight exaggeration especially in todays market where a typical example fetches mid 30's...but as Glyn has pointed out they are nearing 30 years in age and were basically a supercar when released, they weren't bought just to putt back and forth to the shops typically ;)

Basically what I was getting at is if you're scraping together every last cent to buy one then it's probably not the car for you, you need to prepare for the inevitable maintenance issues at a minimum (heater hoses etc...) then you get hit with the 'GTR' tax on most things you buy...

i can  afford a 35k gtr no worries just unsure what the smarter option is

 

Haven't seen an r32 gtr at 20k domestically that doesn't need a load of work. One atm on some facebook forums at 27k with a non original motor (r33 motor and looks rough), needs a full respray and there arent even photos of the interior either. Im sure 35k will get you one with minimal work (although theres always something not perfect, depends on what you are looking for).

17 hours ago, darkparagon said:

 

Well why do you want an R32 GTR?

I think if you can answer that then you will answer your own question.

If you just want one as it appears as though it's what everyone else wants or to just say you've had one then it's probably not the 'smarter' option.

But if you want one as it's the car you've always wanted and you're not planning to ever sell (or anytime soon) then I would deem it to be a 'smart' option.

Whatever you decide just be prepared to spend more money, the cleanest examples will still inevitably need money spending, don't buy one thinking you won't have to spend money on her. They're like a woman, even if you don't 'need' to spend money you will find yourself 'wanting' to spend money on her.

  • Like 2
9 minutes ago, mr_rbman said:

Whatever you decide just be prepared to spend more money, the cleanest examples will still inevitably need money spending, don't buy one thinking you won't have to spend money on her. They're like a woman, even if you don't 'need' to spend money you will find yourself 'wanting' to spend money on her.

Haha well put. I've been lucky with mine, only minor issues (coilpacks, AFMs) but the engine is standard. Spent a little bit of money on suspension and brakes, so it's a "budget" ownership for me. Unfortunately, if I checked the underside I wouldn't have bought it. Double edged sword.

I wonder how long before some of the "new" owners get over the "trend" and prices start coming down?

6 minutes ago, niZmO_Man said:

Haha well put. I've been lucky with mine, only minor issues (coilpacks, AFMs) but the engine is standard. Spent a little bit of money on suspension and brakes, so it's a "budget" ownership for me. Unfortunately, if I checked the underside I wouldn't have bought it. Double edged sword.

I wonder how long before some of the "new" owners get over the "trend" and prices start coming down?

In all honesty I can't ever see them coming down, maybe stagnate but never go back down....It comes back to supply and demand.

There are far fewer cleaner examples these days and even less of the immaculate ones......and with the yanks now grabbing them this has been exacerbated.

This being the main reason I bought my SIL80 and my GTR will go from being a weekend warrior and hillclimb car to just a special occasion/weekend warrior...

 

Edited by mr_rbman

Buying a built/better condition car is much more sensible if you plan  on modifying down the track, however you might have to wait awhile. I looked at R32 GTRs/Evos etc for nearly 2 years and didn't find one suitable but you might be less fussy than I am.

My advice would be to wait, you'll end up spending much less in the long run if you modify. I'd also recommend to anyone who is looking at a R32 GTR to consider a Supra, better driveline than a R34 GTR with lower prices than a R32 (slightly). 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...