Jump to content
SAU Community

Recommended Posts

Burning $1000 - Brakes or Diff?

As title states, I have roughly $1000 to spend on my r33 gtst.

It's currently my daily which I've tracked a few times. Has 300kw and dialed in suspension; brakes and diff are pretty much the only things still stock.

Option A - Nismo GT Pro 1.5 Way LSD.

Good for track and will stop the singling, but possibly shit for a daily driven car.

Option B - S15 Torsen Diff and half shafts.

Good street diff but requires use of weaker 6 bolt half shafts. 

Option C - 350z Brake upgrade.

350z front calipers/rotors and upgraded rear rotors and pads. But enough of an improvement over stock?

Any of the above options should cost around the 1k mark (s15 diff may cost less), give or take.

Which of the above would be the most worthwhile/best bang for buck?

Open to opinions/suggestions.

 

Edited by colourclassic
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/469602-burning-1000-brakes-or-diff/
Share on other sites

I'd cast a strong vote for Option C, especially at 300kw. You'd want good pads and fluid too so 1k might be a stretch, but those are easy to add in later. Good DIY by Johnny here: http://www.trak-life.com/diy-350z-brembo-brakes-conversion-nissan-skyline-r33-gts-t-gts-gts-4/

Re Option A, I had a Nismo 1.5-way put in last year, it's lovely on the track but I wouldn't daily it. It's 'livable' but not fun in suburban traffic. Plus, the Pro is about 1.5k new from Japan + installation so you're looking at more like 2k+ if new and you're not installing it yourself.

  • Like 1

It's got new brake fluid and QFM HPX pads at the moment. The brakes work okay I suppose but I'd like a bit more initial bite and less fade. 

The diff definitely needs to be done, but I'm weary of using a mechanical lsd on a street car. Wish there was a drop in torsen for R33's. 

As far as brakes go, unless your doing a lot of track work, the standard setup with good fluid, pads and air guides for cooling work well. They work well on track too but the pads won't last more than 2-3 track days. If you decide on staying stock, try intima Sr next time around. They will provide better bite and fade resistance than your current pads

 

 

Edit. If you get serious about brakes, you may want to go bigger than 350z brembo, something like hardsteppa got (ATTKD brake Kit) from just jap. Although significantly more than 1k.

 

 

  • Like 2
5 hours ago, hardsteppa said:

With a torsen, don't they only lock while both wheels are on the ground? So any inside wheel lift will mean no lsd? Fk that for a street car.

Yes, but with both wheels on the ground they offer good positive differential action without any of the clunkiness of a mechanical diff. On the street the only time the wheels would come off the ground is entering steep driveways, which the car is too low for anyway. 

2 hours ago, colourclassic said:

Yes, but with both wheels on the ground they offer good positive differential action without any of the clunkiness of a mechanical diff. On the street the only time the wheels would come off the ground is entering steep driveways, which the car is too low for anyway. 

if you're using adjustable coilovers, they tend to have a lot less droop than stock suspension, so the inside wheel can lift quite frequently with any sort of hard cornering, or uneven surface. That's why I love my mechanical, locked on throttle even with one wheel right off the ground.

Sure they are clunky, but after being able to stay right on the tail of a new model Porsche 911 on the mountain circuit, I wouldn't change it out, they really are amazing. My biggest gripe is more the wear to tyres. 

tbh I don't drive so hard to lift wheels on the street.

my mates s15 had the helical/torsen diff and for all its disadvantages, it was superior to a viscous LSD in all circumstances. another mate has a 34 with a kaaz 2 way and it was hell to drive on the street, only good for track. i guess a lightly preloaded 1.5 way would be a compromise between the two.

Edited by colourclassic
On ‎14‎/‎03‎/‎2017 at 11:59 AM, admS15 said:

As far as brakes go, unless your doing a lot of track work, the standard setup with good fluid, pads and air guides for cooling work well. They work well on track too but the pads won't last more than 2-3 track days. If you decide on staying stock, try intima Sr next time around. They will provide better bite and fade resistance than your current pads

 

 

Edit. If you get serious about brakes, you may want to go bigger than 350z brembo, something like hardsteppa got (ATTKD brake Kit) from just jap. Although significantly more than 1k.

 

 

I did all the usual brake improvements to the standard R33 GTS25t set-up. Slotted RDA rotors, QFM A1RMs, braided lines, Cusco master cylinder stopper, RBF660, cooling ducts etc.  I then decided to pay the $ for a K-Sport BBK (356mm F&R  / 8 and 4 piston) The difference is night and day.  Bit more than $1k though.

Do the diff first. Save for a BBK.

I have a Nismo GT Pro 1.5 in mine. It's liveable. Might change my mind if it was my daily  - it's not.     

 

  • Like 1
On 14/03/2017 at 9:41 PM, colourclassic said:

tbh I don't drive so hard to lift wheels on the street.

my mates s15 had the helical/torsen diff and for all its disadvantages, it was superior to a viscous LSD in all circumstances. another mate has a 34 with a kaaz 2 way and it was hell to drive on the street, only good for track. i guess a lightly preloaded 1.5 way would be a compromise between the two.

Please go and drive (or at least be a passenger) a 1.5-way before deciding, especially if it's a daily driven car. Do slow speed and sharp corners too, the usual suburban stuff.

People have very different views on what's 'streetable' and 'livable', I certainly wouldn't drive my car with the 1.5-way as a daily. Yes, soft, I know.

  • Like 1

Clunks and bangs etc. At car park manoeuvring speeds are par for the course with a GT Pro 1.5-way. Might be a bit tamer on the softest of the three settings and with certain diff' fluids   

Do the larger 6 and 8 piston BBK's work okay with the factory master cylinder and ABS? I guess with much larger front brakes the bias might be a bit more forward based?

Sounds like a mechanical diff isn't what I want for now. I might go about either shimming my VLSD or getting an S15 diff and giving that a shot. 

Should be able to squeak in under $1k for a 370z akebono brake upgrade.
Don't fade like the 350z brembos do.

I managed a set of calipers with pads, f&r RDA slotted rotors and bbk bracket for just under $1k, so it can be done.

Sent from my HTC_0P6B using SAU Community mobile app

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...