Jump to content
SAU Community

Recommended Posts

What causes did you find for body/suspension squeeks and clunks?

My r33 is modified and it does make a variety of noises while driving. I've just gone and replaced my coilovers for new, replaced my caster rods and even replaced the passenger side front lower control arm ball joint and to my great shock; all the squeaks and noises I had before, I still have! I'm especially confused as, in particular, I'm running out of things to replace on the front left, but I still have a clunk noise.

So it got me thinking, what parts of the car have you proven were the cause of squeaks, clunks or general body noise? What have you changed which has solved it? I love my car and want to get it as perfect as a 20 year old car can be, so lets share the ways to make it a more pleasant drive.

a common  and unexpected clunker is the shock top mounts, particularly if you either re-used the factory ones with your new coilovers, and also if they are new but are rose joint type they can start clunking surprisingly quickly.

also, it can simply be a loose nut on a joint that causes the clunk without anything being wrong bush-wise, so check them all.

BTW do you think it is front or rear clunk. rear clunk would most commonly be subframe or diff bushes

I was chasing an annoying squeak in my 4wd, you could hear it as you were driving along, looked at shocks, suspension, engine covers, you name it.....turned out to be the bonnet rubbers being screwed down a bit too much.  I give them more height so that the bonnet was a snugger [not even sure that's a word lol] fit and it fixed it.......not saying its one of yours, but its definitely worth a look.

To throw another one out there, I was getting a noise in my other car which sounded like a container ship groaning. By spraying WD40 on it to test (makes the noise temporarily go away) it appears its the rubber swaybar bush where the bar goes through which wears and causes that noise. I have new ones ready to install.

Back on me now, the clunk is front left (I believe) and although the coilovers are new, they are designed more for comfort than drift harshness, so I'm going to assume it shouldn't be them. I have replaced the tie rod ends and swaybar links in the last 2 years, so they should be in good condition, but I will have to check that everything is bolted on property and tight.

From the rear Im getting mostly squeeking noises. I have rear camber arms, a rear suspension brace kit, upper tower bar, aftermarket swaybar as well as metal subframe bushes. Ideas? Could it be else ware on the body even?

30 minutes ago, tridentt150v said:

I was chasing an annoying squeak in my 4wd, you could hear it as you were driving along, looked at shocks, suspension, engine covers, you name it.....turned out to be the bonnet rubbers being screwed down a bit too much.  I give them more height so that the bonnet was a snugger [not even sure that's a word lol] fit and it fixed it.......not saying its one of yours, but its definitely worth a look.

Yeah, stuff like this is good as I would never think to chase it to something like that

Almost a mission impossible, so many possible causes.

We were just chasing a weird squeak on my car after replacing the engine, sounded like a frog pond?! It turned out to be a heater hose clamp scuffing the firewall, doh.

Another thing that drove me nuts back in the day was a clear clunk when braking, which turned out to be aftermarket castor rod bush ID not matching the OEM bolt OD. Pro tip: Measure the bush ID of all suspension parts before throwing them in to make sure that it matches the original.

Also anything with a rose joint (i.e. most aftermarket suspension parts) will be noisy, compared to an OEM rubber bush.

And let's not even start on the mechanical diff...

27 yo R32 GT-R with a stack of miles on the clock (and probably a stack off it).

1. Door glass on hardened rubber
2. Door latch on striker plates
3. Bonnet rubber seals on cooling panel
4. Passenger searbelt retaining bolt loose
5. Centre console surround loose.
6. Steering wheel surround expands with heat and rubs.
7. Something in boot squeaks after about an hour

Another one I had was an annoying little rattle in the drivers door of the Skyline.  I looked and tightened everything, even stuck more foam on the door wire/rod latches...no fix.

More recently my rear view mirror stopped folding in, so I took everything out to fix it and duh duh....the front window guide/bracket rubber was torn and hanging.  You couldn't see itat all and looking down through the window sweeper gap it didn't show.

I ordered new brackets from the Brissy business [will add their name if I can think of it]  and fixed the rattle, so very happy.

16 hours ago, Robzilla32 said:

27 yo R32 GT-R with a stack of miles on the clock (and probably a stack off it).

1. Door glass on hardened rubber
2. Door latch on striker plates
3. Bonnet rubber seals on cooling panel
4. Passenger searbelt retaining bolt loose
5. Centre console surround loose.
6. Steering wheel surround expands with heat and rubs.
7. Something in boot squeaks after about an hour

Its like fighting a losing battle having an older car :(

On 3/27/2017 at 4:42 PM, ausdrift said:

Its like fighting a losing battle having an older car :(

or pretty much anything nissan. all my cars have a variety of sounds that change according to ambient temp. some days its silence, other days all sorts of random stuff rattles and shakes

I have a rattle behind the drivers and passenger ac vents. Its not always there but when it is.... its bloody annoying.

Whats even more annoying is it rattles with the vibrations of the motor at idle..

if the Ac comes on and drops the revs a little, it goes away, but is there at 950 rpm. which is where the car idles haha

One more I've read about and I'm sure people on here have had to deal with is the heater vent box? thing under the dash. Its fixable, according to threads on it but I hear the real pain is getting to it, often involving dash out. Lucky I don't have that one...yet

Update, I had a poke around the front left suspension and found that the swaybar link OD is slightly smaller than the swaybar and car ID so I believe that's where the clunk was coming from. The swaybar is aftermarket and I've tried to fix it as best I can but I think I need a proper go at it in the future. Also the whole car squeaks like crazy, so a winter job might be to try take apart everything suspension related, inspect, clean, lube as needed and refit. Its driving me nuts; good thing I have a loud audio system.

  • 1 year later...

Just thought Id revive an old thread. I always thought I was on top of the suspension side of things and most of it was all aftermarket or changed out within the last few years. Ive since learned that I had completely forgotten about my subframe bushes and while I haven't yet changed them out (will do soon), im very sure that this is the cause of a large amount of the noise ive been putting up with. Am changing out the diff mounts while im at it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...