Jump to content
SAU Community

Recommended Posts

Hey blokes i have a imported 2001 r34 rb25de neo 130,000kms, i cant part with it and ive come to the decision i want to turbo it instead of buying a gtt. ( i know alot of you will be against that [emoji23])

 

I got a quote from 999 auto to do the conversion,

 

IMG_1483.JPG

 

I want your opinions on wether that is too much for the neo engine because i was hoping to get it a bit cheaper flog the neo and end up buying a 25/26 or hopefully 26 in the long run and put in it, is the neo going to push much more power after sinking that much into it?

 

Any advice is greatly apreciated [emoji16]

Link to comment
https://www.sau.com.au/forums/topic/470734-turbo-conversion-for-r34-na/
Share on other sites

12k lmao f**k that.

Take a quick look at the RB25DE+T threads here;

That would be an "ok" bunch of parts on a DET engine.. however with a DE+T engine with that setup and you've got a fireball on your hands.

Literally buy stock DET parts from facebook/forum and slap them on. Or sell and buy GTT as suggested :)

  • Like 1

To be honest, the quote he has been given isn't really that bad. The cost would be similar to take a GTT and take it to what is essentially a GTX3071 -320kw style build.

It is a very expensive exercise.
You will almost certainly blow the NA engine at that point too. GTT engine would likely be ok.

Put a V8 into it instead :P

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...