Jump to content
SAU Community

Recommended Posts

Intermittent misfiring on rb25det

My r33 skyline has recently started intermittently  misfiring on idle and while driving. 

Spark plugs are new, new yellow jacket coil packs, replaced the o2 sensor, and cleaned the maf several times and a fuel system flush has been performed 

the misfire doesn't sound to be on anyone cylinder. when it does misfire white smoke comes from the exhaust and the coolant level has been going down.

Could the turbo be leaking coolant into the intake causing the misfire when it reaches the cylinder? Has this been an issue before? 

Link to comment
https://www.sau.com.au/forums/topic/470940-intermittent-misfiring-on-rb25det/
Share on other sites

Turbo coolant leak is almost completely unheard of in the real world.  Nor would it cause a misfire unless it was allowing buckets of water to leak.

You will almost certainly have a BHG or a crack in the head, with BHG being top of the list, when it comes to explaining mysterious coolant loss.  The miss may or may not be associated.

  • Like 1

I agree with above. I first had this same problem when I got a used engine. On mine the head was rotten to the point it would leak coolant into the combustion chamber. Hence the white smoke. BHG or bad head.

  • Like 1

The previous owner had it sitting in a shed for a while so that could have rooted the head gasket, maybe due to bad coolant (was very murky when I flushed it). But it was driving perfect till a couple of weeks ago 

Could be worse, I had this issue due to a cracked block.... three times.

:P

But yes, coolant going into the wrong places can cause a misfire. Especially a misfire with white smoke.

4 hours ago, GTSBoy said:

But on the scale of likelihood.........0.00000001 chance that it's that.

Still a chance though ?‍♂️?

just the symptoms of a bad intake gasket match to what is happening to my car, like missfires, no power/rough acceleration and coolant going down 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • The roof is wrapped
×
×
  • Create New...