Jump to content
SAU Community

Recommended Posts

Received my kit yesterday, and fitted it up this morning, took a couple of hours to do from start to finish including removing old standard unit. 

Everything bolted up perfectly and lines up spot on, great quality and an excellent upgrade for the electrical system ready for any added extras down the road. 

Personally I found the best course of action for fitment is to drop the old unit off through the gap between the radiator shroud and the power steering lines etc, and have the extension bracket mounted to unit not fully tightened, that way you can wriggle stuff around when lifting the new one up through the gap, hardest bit, and part that illicits the most cursing of engineering design etc. Is the placement of the lower pivot bolt, you can either see it, or you can get a hand in there to fit it, Never both! Once bottom bolt is in the rest is easy as. 

Electrical system is now a lot more stable and also a bit quieter on the belt noise level with the new pulley too, so I will be recommending this kit to all of the local jdm nut bags and passing them the info/links etc. 

  • Like 2

Yep, 100% agree, ive only recently got my car back from the workshop so haven’t done a heap of driving but I’ve already noticed the electrical system is better, before with lights on and stereo on I would see a drop in voltage and that was only running one fuel pump. I’m now running three pumps, no issues, no volt drop.
Very happy customer here.
But I didn’t fit it, I had the workshop fit it.

  • Like 1
11 hours ago, Old man 32 GTR said:

Yep, 100% agree, ive only recently got my car back from the workshop so haven’t done a heap of driving but I’ve already noticed the electrical system is better, before with lights on and stereo on I would see a drop in voltage and that was only running one fuel pump. I’m now running three pumps, no issues, no volt drop.
Very happy customer here.
But I didn’t fit it, I had the workshop fit it.

3 fuel pumps? jeebus I'd hate to have your bloody fuel bill hahahaha, 2 questions... why 3 pumps? and secondly are any of them a "drop-in" upgrade that aren't as loud as a rotary13B sitting in your boot?

I might look at doing a pump and reg upgrade in the future but don't want a massively loud thing resonating in the wagon, so I'm looking for recommendations of an in-tank minimal fuss type of thing, any suggestions?

Fuel system was done by DVS Tuning, radium surge tank with twin walbro 460’s staged and another walbro in the main tank feeding the surge tank.
It’s unbelievably quiet, I’m very happy with it. Supports my 500kw and is good for substantially more should I wish to pursue more power in the future.
This is why I upgraded the alternator

  • Like 1
22 hours ago, cul8er said:

Anyone have to do a power cable to support the extra 70a due to bigger alternator ?

mine already had much thicker cable than standard due to the car having a uber-ridiculous stereo system in it when i got it, but can buy 200amp rated cable  10mm thick in super cheap which is about $8-10 a metre that'll be more than up to the task, then go to an electrical wholesaler or battery shop for the crimp on ends

  • 2 weeks later...

Just fitted a rat32r kit with an alternator he supplied. Very nice kit and straight forward instalation. Idle voltage has gone from 14.2v to 14.45v. The Attessa light is staying off now, so the only remaining issue is the ABS.

  • Like 2
  • 1 month later...
Just fitted a rat32r kit with an alternator he supplied. Very nice kit and straight forward instalation. Idle voltage has gone from 14.2v to 14.45v. The Attessa light is staying off now, so the only remaining issue is the ABS.
Do you know how i can get hold of rat32r i have messaged him on here with no response
  • 2 weeks later...

Would it be possible to see a pic of an RB spec Mitsubishi Alternator next to the LS Mitsy one please .

I'm very interested in this kit but just curious to see if the LS one is larger in diameter compared to the Nissan supplied one .

Mine would be for an R33 spec RB25DET .

Thanks in advance , cheers Adrian .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
    • -10 is plenty for running to an oil cooler. When you look at oil feeds, like power steering feeds, they're much smaller, and then just a larger hose size to move volume in less pressure. No need for -12. Even on the race cars, like Duncans, and endurance cars, most of them are all running -10 and everything works perfectly fine, temps are under control, and there's no restrictions.
    • Update: O2 sensor in my downpipe turned out to be faulty when I plugged in to the Haltech software. Was getting a "open circuit" warning. Tons of carbon buildup on it, probably from when I was running rich for a while before getting it corrected. Replaced with new unit and test drove again. The shuffle still happens, albeit far less now. I am not able to replicate it as reliably and it no longer happens at the same RPM levels as before. The only time I was able to hear it was in 5th going uphill and another time in 5th where there was no noticeable incline but applying more throttle first sped it up and then cleared it. Then once in 4th when I slightly lifted the throttle going over a bump but cleared right after. My understanding is that with the O2 sensor out, the ECU relies entirely on the MAP tune and isn't able to make its small adjustments based on the sensors reading. All in all, a big improvement, though not the silver bullet. Will try validating the actuators are set up correctly, and potentially setting up shop time to tune the boost controller on closed loop rather than the open loop it is set to now. Think if it's set up on closed loop to take the O2 reading, that should deal with these last bits. Will try to update again as I go. 
×
×
  • Create New...