Jump to content
SAU Community

PM35 swap diff with V35?

NicPM35
 Share

Recommended Posts

NicPM35 Collaborator

NicPM35

Posted
Posted

Looking at grabbing a LSD from a 6 speed V35. 

Having trouble finding information confirming that it's a direct fit to the 3.5 RWD Stagea. 

Different forums mention things about splines not lining up and ratios being different...

I am aware the LSD's from ARX etc will fit easy, but I have the opportunity to get a cheap V35 diff.

 

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/474231-pm35-swap-diff-with-v35/
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted

They are both R200 diffs, from similar era cars, so it is likely that the housings/mountings etc are compatible.

Splines not lining up is not a problem unless the LSD has different stub axles to what the other diff has.  This is actually a strong possibility.  So if you have to keep the stub axles that belong to the centre, then you may have to look at swapping driveshafts too.  This is possible.  Most (OK, not necessarily most, but certainly many) Nissan driveshafts swap from family to family.

Ratio difference is something that you will have to work out if the change is good or bad.  It will throw your speedo out.  That's always bad.  If you can't take it, then you will be looking at swapping the CW&P from your original diff onto the LSD centre.  This is a complete disassemble of both diffs and reassembly (and proper setup) of at least one.  This is usually possible, but Nissan do have a habit of launching surprises at the unwary, where the CW bolts are different sizes in two otherwise similar diffs.

The other problem that may crop up is differences in the ABS sensors and rings.

NicPM35 Collaborator

NicPM35

Posted
  • Author
Posted

Thankfully my engine is stock, so a VLSD will work just fine. Just as they do in the AWD Stageas, 350z and V35 cars already. I used to run a tiny stock Mazda VLSD in my 260hp MX5 NA with zero troubles, so not sure what level of power you are talking about

Leroy Peterson Grand Master

Leroy Peterson

Posted
Posted

If youre going to the trouble of swapping diffs, its worth getting something half decent. Especially if you dont knkw if its a 100% fit.
I upgraded to NM35 helical diff for my mechanically stock car and very happy with that choice. Due to the immense variety of R200 diffs, you just dont really know until you go to put it in.

  • Thanks 1
GTSBoy Grand Master

GTSBoy

Posted
Posted

Don't be a f**kwit.  You asked.  I answered with useful info.  I also told you that if it was a VLSD it was a waste of time, not knowing whether Nissan persisted with putting those useless lumps of shit into cars after the R3x era.  Now that I do know, I can authoritatively tell the next guy that it is definitely a bad idea.  Thanks, you have helped the forum.

Put it this way, if you have a car that will work well with a VLSD, you don't really need an LSD at all.

  • Like 1
  • Thanks 1
Leroy Peterson Grand Master

Leroy Peterson

Posted
Posted
On 6/9/2018 at 9:38 AM, NicPM35 said:

The issue I'm concerned about is ratios and fitment, not what type of lsd i should be using.

and like I said, with fitment you won't really know until you go to put it in. Unless the info is on SAU or a Canadian/UK Skyline forum, you probably won't find the information via google.

The Y34 has almost identical rear end to M35/V35/Z33, all using R200 diff. I think all used 6x1 bolt half-shafts with external ABS rings on the half shafts. and NM35 helical diff needed a fair chunk of one of my half shafts machined off to fit it. The diff, fitting and machining was a bit over $500 total, which is considered a decent total price for a helical diff.
My point is, how much do you plan to save trying to use V35 diff? the cost could potentially be much higher than just sourcing something that others have proven to fit without issue.

  • Thanks 1
NicPM35 Collaborator

NicPM35

Posted
  • Author
Posted

The only options I've heard are aftermarket and cost out the arse. If I can get anything that is not an open diff, second hand on the cheap, then sign me up!

I agree you will never know for certain until you fit the diff yourself, that's why I'm asking on a forum for first hand experience. 

I see second hand diffs going for $150-250 online, so not sure why everyone is scolding me for wanting to throw in a dirt cheap replacement for a stock standard car with a shitty open diff. It's a great idea I think! 

Leroy Peterson Grand Master

Leroy Peterson

Posted
Posted

Try and get an OEM helical diff from a M35 or whatever LSD the 350Z track edition runs (unless its viscous, then avoid) and get a decent mechanic or diff specialist to fit it.

Youre right, aftermarket diffs are not worth the price for basic setups.

 

I tried an R34 R200 helical diff but the dimensions of the diff centres seemed completely different.

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      The SS button head cap screw on the back? If so, good to know. I presumed it was there for basic assembly and nothing more. 
    • Kirby7887
      R32 GTR Lost All Interior Power to IGN Accessories

      By Kirby7887 · Posted

      Hello, everyone. I'm new to the forum. I have a 1989 Nissan Skyline R32 GTR. I have lost all power to the interior, including AC controls, the gauge cluster, turn signals, and windows. Stuff that still works includes the horn, brake lights, radio, and headlights. All fuses, in the interior and exterior boxes, tested good.  It starts and runs fine, just with no gauge power or anything stated above. No warning lights either. Things that I have tested: - Fusable link tested fine - No other fuses blown - Alternator good - IGN switch tested fine - With my power probe, I can backfeed power through the IGN pin to the plug on the back of the gauge cluster, and everything comes back on.    So my theory is something on the control side that sends the ignition power through the system isn't doing its job, or a wire is broken. (I would think that it is the ignition switch that would do that, but who knows?). The ignition relays don't fire (all relays tested good). So what tells them to fire other than the IGN switch?  I would really appreciate it if someone had some insight on this. I have tons of hours into this; I don't want to give up in defeat! I have the HD wiring diagram, but having all those wires laid out like that on one sheet of paper makes things pretty hard to follow.  Thanks for reading, and thanks for the replies.  Where should I look next? Thanks.
    • Dose Pipe Sutututu
      Mistakes were made, my R34 Story

      By Dose Pipe Sutututu · Posted

      Install a MAP sensor pre and post throttle. Best data you could have for NA, then play with the bends and/or air box and see how much of inflection is created at WOT on the plot.
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      And gone to a new home  
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      The car remains in paint jail. I am now pretty convinced that the whole "RB25 Airboxes are kinda limiting to ~300kw" could be a thing. Also saw a good video from Engine Masters: (Sorry for FB link) (https://www.facebook.com/watch/?ref=search&v=761771519471924&external_log_id=c10bcbb6-2c39-4ff3-9240-287e9921fde6&q=Cold Air Considerations) Where they tested Pod Filter sizes and kept adding bends to a LS3 on an Engine Dyno to find if bends caused power loss. It's a good video worth watching - They did lose ~25hp from making an intake which had 3x90's and a 120 degree. They only lost maybe 1hp with a basic 90. I feel that by sealing up my airbox I have: 1) Created the same restriction a stock airbox would have. 2) Created a very convoluted set of intake 'pipes' by forcing all the air through the ducts. So I am pretty confident I'll be going full circle and have a huge hot air intake pod and actually see a benefit. The air does *not* stay hot once it gets flowing, aided by the ducts, and the pod can then pull air from anywhere. All the posts of yore talk about the stock airbox costing 10-15kw at 300kw+ but you know what? I f**king would very much like that 10-15kw and I remember my own pod filter in engine bay experiences. Turns out the GTT Reo and Headlight brackets really don't allow you to mount GTR items, no matter what the internet says. Various brackets have had to be made up to actually make it fit right for the front bar. Also some idiot mounted a 3L Accusump right where the bumper wants to go, so that has had to be 'relocated' To where, I am still not sure, but it's supposedly mounted in the pictures and I can't see it.
×
×
  • Create New...