Jump to content
SAU Community

Recommended Posts

22 minutes ago, GTSBoy said:

You might ask Haltech what could be done to the ECU to permit the use of the PRP triggers.  It might be possible.

Yeah need to go PS2000 or Elite series is the only real option, the trigger settings for the Pro Plug-ins are hard coded (if memory serves me correctly).

1 hour ago, Dose Pipe Sutututu said:

Yeah need to go PS2000 or Elite series is the only real option, the trigger settings for the Pro Plug-ins are hard coded (if memory serves me correctly).

Yes, but my thought is that Haltech are on of those crowds that occasionally do special firmware for their ECUs, if you ask nicely enough.

19 minutes ago, GTSBoy said:

Yes, but my thought is that Haltech are on of those crowds that occasionally do special firmware for their ECUs, if you ask nicely enough.

Doesn't hurt to ask I suppose :)

I know Andy at Adaptronic back in the day happily wrote custom firmware for me, top bloke!

  • 1 month later...
On 6/15/2018 at 1:23 PM, Dose Pipe Sutututu said:

Yeah need to go PS2000 or Elite series is the only real option, the trigger settings for the Pro Plug-ins are hard coded (if memory serves me correctly).

I emailed Haltech and their reply is the following

Quote

The Pro model supports the factory CAS and also the kits that use a 12x tooth crank and 1x tooth cam trigger.  So those kits look fine. 
It is just a setting in your Ecu to change it over.

 

  • 5 months later...

I cannot decide which cams to go with especially when 8474 is going to available soon. I want response but don’t want to give up all the top end.

Tomei 260Degree 10.8mm lift Intake
Tomei 260Degree 10.8mm lift Exhaust
Or
HKS V Cam Step 1 248Degree 8.6mm  Lift Intake
Mines 252Degree 10.05mm Lift Exhaust
Or
Mines 252Degree 10.05mm Lift Intake
Mines 252Degree 10.05mm Lift Exhaust
Or
Unigroup 258Degree 11mm Lift Intake
Unigroup 258Degree 11mm Lift Exhaust

Quick question, have you dat down with an engine builder and talked about what you want?

Sounds like a catalogue car that will sound cool on paper but will have a crap ton of lag and go no where fast.

 

Your head is where your power is going to be made and running cam numbers off like that doesn’t mean anything until your dead set on a turbo and a power goal. 

I spent 3 months talking to people and reading about turbo vs cam specs before I jumped in the deep end with my builder.

 

PS there was a purple r33 GTR here in NZ that was a book car and it was nothing special once you drove it, HKS here Greddy there, no power delivery 

  • Thanks 1
2 hours ago, WR33KD said:

Quick question, have you dat down with an engine builder and talked about what you want?

Sounds like a catalogue car that will sound cool on paper but will have a crap ton of lag and go no where fast.

 

Your head is where your power is going to be made and running cam numbers off like that doesn’t mean anything until your dead set on a turbo and a power goal. 

I spent 3 months talking to people and reading about turbo vs cam specs before I jumped in the deep end with my builder.

 

PS there was a purple r33 GTR here in NZ that was a book car and it was nothing special once you drove it, HKS here Greddy there, no power delivery 

Yes I have talked to a few different builders.

 

I am set on EFR 8374 1.05 or 8474 if available.

 

I’m just trying to reuse most of the parts that came with the car. And since theres no shop capable to doing any custom work over here in Hong Kong, I need to use of the shelf items aka exhaust...etc

Edited by etang789
1 hour ago, NEO25T said:

Yep can use it with platinum pro but as previously suggested I would go elite if I were u

20190123_163333.thumb.jpg.a906602072df39a93d0fae7919ac67e3.jpg

Yea I figured out that setting.

I’m leaning towards Elite but will wait until last minute to decide. Don’t want to be like last time (the build dragged on for 2 years) that Elite came out right after I finally installed the Platinum Pro...

Edited by etang789

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...