Jump to content
SAU Community

Recommended Posts

37 minutes ago, Dose Pipe Sutututu said:

NA tune, $1.1k for that extra 6.245kW

With my exhaust a massive 10-20 killerwasps is possibly achievable, maybe,for a engine that makes around 100rwkw even an extra 10 to 20% power increase would be good.

But really its the midrange that gets a good lump more of the powers.

Plus I miss rev match, and launch control and flat foot shifting is novel..

Also, I wish it was 1.1k, so far one joint at Marrickville wants 1.4k, and one at Menai wants 1.5k, so about $100 per maybe Kw's.

I've had work done at Menai before and I like the cut of their jib, aaarrrrrrr.

  • 3 weeks later...

Booked in at Pulse Racing for tune, finally.

06 March at this stage, unless a earlier opening pops up.

Car is going flawlessly and handling like a dream.

Common sense prevailed IRT boost, I would be better of just buying something already fast, after owning the boat (33) with it's lotsa hp and fat torques, anything under 500hp and lotsa torques feels  slow.

So for now it's slow and low in the 86.

I am looking forward to getting the car tuned, I will see "some" NA gains, but really, the rev match, flat foot shifting and launch control from Ecutek is awesome , not that it makes me any quicker, but the noises and stuff makes this old guy smile, alot.

The other bonus of staying NA is the minimal worry about reliability, I can thrash the guts out of it and not worry about putting bay windows in the block or melting pistons, breaking rods, eating gearboxes and clutches.

Silver linings and shit.

  • Like 2
On ‎2‎/‎8‎/‎2019 at 7:57 PM, mlr said:

The other bonus of staying NA is the minimal worry about reliability, I can thrash the guts out of it and not worry about putting bay windows in the block or melting pistons, breaking rods, eating gearboxes, clutches and breaking an oil pump + grenading your motor afterwards

FYP :) 

7 hours ago, Dose Pipe Sutututu said:

FYP :) 

I would be wary about making that assumption IRT the FA20 oil pump.

"Apparently" when in the high rpm range and high oil temp the oil pump tends to cavitate enough to form pitting and a good drop in pressure, worst case senario is lunching oil pump gear.

You can up the oil weight to keep it up a bit, but there are the usual issues with a higher weight oil, more temp, OEM recommend 0w 20, I use 5w 30 (toyota recommend this for "extreme conditions", which I assume equates to my normal driving).

Reality wise, it won't be a issue for me, but, if you are building a track car it may be something to think about, well, mainly oil weight and temp control, from googling around there isn't any real fix for the cavitation at high rpm short of a exy dry sump solution.

Hell, in the end the FA20 is a cheap econobox power plant, it goes good for what it is.

1 hour ago, Dose Pipe Sutututu said:

Haha I thought you were reminiscing about your old R33, hence I added in the blow oil pump part lol

My eye twitches every time I think of my old 33.

It's like a Rorschach test every time I see a oil spill.

  • 3 weeks later...

So, the car goes for its tune next Wednesday, did the oil and filter, shaked out the floor mats and decided to grab a new air filter, the 17+ manual cars have a different airbox and intake design to previous models.

LOL........sooooo, I went past Toyota spares joint and asked if they had a engine air filter, they put in my vin, 17 manual, and then said they had none but could get one shipped next week.

And then...I asked how much...$75AUD, I laughed and said "na mate, just the paper element filter", he checked, got his boss to look and then asked if I want to order it now.

I laughed and walked, strangely the Ryco one I got is near on the same as the Toyota, except the packaging that is, the Ryco cost me $35 at Repco, and you can pick one up for $20 on fleabay.

There is a difference in the number of pleats, but not alot, it is still a big improvement on the crap cotton filters they used pre 17.

I'm sure the filter will not pose a restriction, even with my massive NA donkey powers and small torques 

Also found a awesome icecream factory in Mascot, the daughter and her boyfriend had, something??, not mine didn't care, BUT, I had choc chip, which was awesome, they also sell milk, full tilt hippy shit, $6.00 for just under 1 ltr, LOL, but, my god it's good milk, and it's all mine, no one wants fresh full fat creamy milk, I concider that a win for me.

20190228_131856.jpg

20190228_202110.jpg

2 hours ago, Dose Pipe Sutututu said:

My guess, 123.0273480923794873298 kWs

Negative 

It has actually got more than I hoped for.

Taking it for a drive shortly to test the rev match, launch abd flat foot shifting.

I'm excited....

Stoked

Near on 22% increase from before tune.

Stock average is around 107-110, so, assumptions.......my exhaust and intake mods gave me around 5-8 extra donkey powers prior to tuning, then KAPOW, another 32 raging donkey powers.

In the end it's around a 25% power gain over stock, I'm stoked.

I was hoping for 125ish, did I say I'm stocked.

You can really notice it too, the car really wants to rev now, before, not so much.

Launch control if full of LOLS, same same for flat foot shifting, rev match just makes shit easier.

Overall I'm f**kING STOKED in the car now, it still ain't no rocket ship, but it's so much better than stock now its not funny.

 

 

20190306_133115.jpg

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...