Jump to content
SAU Community

Recommended Posts

Making this thread is in my last attempt that hopefully someone has information that I have managed to miss doing research. 

My R33 Skyline will overheat if the A/C is on and sitting at lights. By this I mean, car can be cruising and sitting on 78-82 degrees, pull up at lights and within say 5-10 minutes it will be at least 95 degrees. Usually once it gets to 90 I will turn a/c off and it will stabilize there or come down a degree. 

My tuner suggested that it was my headgasket as it was pushing a bit of coolant on the dyno. I had the engines block and head machined flat and ground to mirror finish to meet the MLS headgasket surface finish requirement. So new headgasket was fitted with new ARP headstuds. No more issues of pushing coolant and tuner said headgasket is 100%. 

This still didn't rectify the issue, so going down the worm hole I have ended up changing the thermostat to a new Genuine Nissan 76.5 degree thermostat. New Nissan waterpump, new Mishimoto Radiator (have also tried new OEM one, Mishimoto was slightly better). I have had my mate make ducting to the radiator (for underneath the car and bumper), purchased a GKTECH cooling panel. Car also has a new Nissan OEM fan clutch and GKTECH fan (which also performed slightly better than the stock fan). 

All this has made a difference to cruising, it will not go over 78 degrees. But when idling at the lights it will still hit 95 degrees. This only happens on 35 degree + days. 

I have considered upgrading the thermo used by the car for A/C  and installing an oil cooler but I feel like I'm just wasting money. 

The system has been bled multiple times and definitely does not have any leaks or air bubbles. 

Is there something I am missing?

Link to comment
https://www.sau.com.au/forums/topic/475674-r33-overheating-issues/
Share on other sites

Making this thread is in my last attempt that hopefully someone has information that I have managed to miss doing research. 

My R33 Skyline will overheat if the A/C is on and sitting at lights. By this I mean, car can be cruising and sitting on 78-82 degrees, pull up at lights and within say 5-10 minutes it will be at least 95 degrees. Usually once it gets to 90 I will turn a/c off and it will stabilize there or come down a degree. 

My tuner suggested that it was my headgasket as it was pushing a bit of coolant on the dyno. I had the engines block and head machined flat and ground to mirror finish to meet the MLS headgasket surface finish requirement. So new headgasket was fitted with new ARP headstuds. No more issues of pushing coolant and tuner said headgasket is 100%. 

This still didn't rectify the issue, so going down the worm hole I have ended up changing the thermostat to a new Genuine Nissan 76.5 degree thermostat. New Nissan waterpump, new Mishimoto Radiator (have also tried new OEM one, Mishimoto was slightly better). I have had my mate make ducting to the radiator (for underneath the car and bumper), purchased a GKTECH cooling panel. Car also has a new Nissan OEM fan clutch and GKTECH fan (which also performed slightly better than the stock fan). 

All this has made a difference to cruising, it will not go over 78 degrees. But when idling at the lights it will still hit 95 degrees. This only happens on 35 degree + days. 

I have considered upgrading the thermo used by the car for A/C  and installing an oil cooler but I feel like I'm just wasting money. 

The system has been bled multiple times and definitely does not have any leaks or air bubbles. 

Is there something I am missing?

Im also struggling with mine sitting in traffic or at lights on a hot day but as soon as i move the water temp drops down to normal temps within a minute or so. But my oil temp stays up there for a long time so i will definitely be purchasing an oil cooler as its a known issue with rbs to struggle with oil temp. Do you have an oil temp gauge and if so does that see huge increase when you're water temp goes up?

 

 

38 minutes ago, GTSBoy said:

95 is not overheating.

 

35 minutes ago, admS15 said:
38 minutes ago, GTSBoy said:
95 is not overheating.

Agree with this, especially if its a 35 degree day.

The issue is that it doesn't stop there, if I stayed still it would keep raising. 

To what?  If it doesn't blow coolant out the cap or overflow bottle, then it is not boiling and it is still working.  Thermostat on the Neo is set to ~90°, runs there all the time.  Air-con on in 38° traffic the other day saw my oil temperature running over 110°C (and my oil temp is usually exactly the same as my coolant temp) and I just kept driving and no engines were damaged.

Recently had similar issue with my daughters H6 subaru and it was caused by air con condensor blocked in lower half,  the condensor was changed and overheating at lights and in bumper to bumper traffic ceased. Just a thought.

Issue has been rectified by upgrading to a heavy duty thermofan on the front and shrouding it with foam around the base. With AC on at the lights on 36 degree day it stabilised at 82 degrees and after sitting for 5 minutes came down to 80 degrees. 

Old thermofan was very lazy. 

  • Like 1
  • 11 months later...

reviving an old thread. I’m having similar issues with my r34. Changed the thermostat and clutch fan. I thought it was solved till today’s scorching heat. Water temp quickly started rising. Oil temp sat at 110. Had to crank the aircon temp to the highest setting to keep the water temp to half the gauge.  What are the chances it’s something to do with the AC? Condenser or compressor?  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ironically the GTT was quite reliable in the 7 years of ownership. From memory I've only had to replace a radiator and coilpacks out of inconvenience 
    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
×
×
  • Create New...