Jump to content
SAU Community

Recommended Posts

Hey guys.

Might be a dumb question but I couldn’t find a definitive answer on the internet.

 

Im looking at buying an xforce turbo back exhaust in the picture I’ve attached but I don’t know if I will need to buy a front pipe (also attached)? Does the front pipe and dump pipe do the same thing or will I need both? 

 

Thanks for answering the newb question!

3B86825F-7924-41E0-8A8D-9BE84B07D536.jpeg

E7085D04-FD0E-45F1-90B1-FDD7D0C039C1.jpeg

Link to comment
https://www.sau.com.au/forums/topic/476487-r33-gtst-exhaust-question/
Share on other sites

Hi Dan

you want the JJR stainless bellmouth dump pipe, which runs all the way to the cat...so eliminates the front pipe and turbo elbow, as it's all one piece. I tested the split dump pipe and JJr bellmouth-type dump pipe and found the bellmouth to be faaaaaar superior.

I also recommend just buying a Venom 4 or 5in metal cat rather than any ceramic cat they usually throw in as part of a package deal.  

 

  • Like 3

Hey mate!

Thanks for the quick reply. I’ve looked into the parts you mentioned. Does that mean if I buy them I will only need to buy a cat back system? If so, can you recommend one?

 

cheers 

 

Dan

16 hours ago, dtrants said:

Hey mate!

Thanks for the quick reply. I’ve looked into the parts you mentioned. Does that mean if I buy them I will only need to buy a cat back system? If so, can you recommend one?

 

cheers 

 

Dan

if you want my advice - and let's face it, who wouldn't :p - you should get this

http://justjap.com/jjr-stainless-3-bellmouth-front-dump-pipe-nissan-skyline-stagea.html?___store=default

which leads into this 

https://www.ebay.com.au/itm/3-VENOM-High-Flow-Cat-Suits-Nissan-Skyline-R32-R33-R34-GTST-GTR-S13-C33-A31/251462134106?fits=Plat_Gen%3AR33&epid=7026943722&hash=item3a8c4fa95a:g:1i4AAOxy69JTDser&frcectupt=true

and then, "cat back exhaust' is this - although, on the loud side so you might want something quieter...but then again, powerrrr

http://justjap.com/jjr-hyperflow-cat-back-exhaust-system-nissan-skyline-r33-gts-t.html

The ceramic cats are shithouse, so rather than buying one now, then changing to a metal cat that's cheap/nasty to save $50, i recommend just get a 5in. body Venom cat that you're unlikely to ever need to upgrade.

 

  • Like 1

Hey mate.

 

thanks for the links! Do you know where I can buy any other brands for the cat back part of the exhaust? Haven’t been able to find any other than that JJR part that you mentioned above.

 

i don’t want to buy a full exhaust just to use the cat back section?

yes - you buy the JJR  BELLMOUTH dump (very important - don't bother with the split type, get bellmouth. Also, JJR stainless seem to be the best made/value for money), Venom cat (as recommended, pay the few extra $$ and get 5in body, rather than skimp now and want to get bigger in a years' time), and then you just need a catback exhaust. HEAPS of Jap brands available, which are usually all just cat-back. But they all get way more pricey. I only just recently got the JJR hyperflow catback which looks to be a knockoff of the HKS, but is in full (304?) stainless rather than 409>304. Was using a Blitz NUR spec previously which I liked, but the JJR is quieter (probs cos brand new) and unleashes more torque. Very happy with it for the price. 

Hey guys,

 

So turns out that the JJR cat backs are out of stock for the next couple months (emailed the manager today) can anyone link me to somewhere I can buy a cat back?

 

cheers!

 

Dan

7 hours ago, dtrants said:

Hey guys,

 

So turns out that the JJR cat backs are out of stock for the next couple months (emailed the manager today) can anyone link me to somewhere I can buy a cat back?

 

cheers!

 

Dan

Don't buy, they are shit and way to loud. You'll be taking it to an exhaust shop to get another muffler put in to stop the drone. Scan Gumtree or Facebook sales for a decent Jap exhaust.

Hey guys.

So I’ve bought the JJR front pipe and bought a blitz Nur spec cat back. Just waiting for the cat to get delivered and I can get it installed! Just before I do, I’ve never seen this in an exhaust before. What is it? And can it/ should it be taken out?

 

thanks!

 

1D1CC6A8-DB22-410D-B080-731903399EC4.jpeg

35 minutes ago, dtrants said:

Quick note: that’s inside the exhaust tip 

It's a silencer.

 

IMO it's a bandaid for poor design.

 

Take it out and its louder, put it in and its quiter, quiter due to restriction.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...