Jump to content
SAU Community

Recommended Posts

20 minutes ago, Dose Pipe Sutututu said:

AIM MXS dash?

Also can do logging 

My curiosity to coin ratio only extends so far

$1500 to see my trans temp and AIT, yeah nah

Plus that AIM dash would look so out of place in the old bogan cruise ship

  • Haha 1

I have a head unit and can thus run any ODB2 app I want. I have the entire torque pro app running in the double din with all the gauges I need.

Note: Don't need any, as I have enough mechanical gauges. But I can put extra stuff there!! And stupid shit like 0-100 runs, or my track day telemetry.

Also Trackaddict is great. And allows overlay for all the circuit things, and does not interfere with god knows what. Go one step further and just tune your f**kin car and buy a MPVI2 lol.

The tech has progressed past whatever that thing is now, and if you want to say have gauges for everything, that is what ODB2 and some kind of display/screen is FOR.

😭 I just want to know my trans temp and IAT 😭

As for tuning, I can barely log on to the interwebs, let alone play with that black magic tuning thing

I can see it now.

"I am going to try tuning my car"........NEK MINNIT.......

DSC_0998.thumb.jpg.339b80a134d6b280ee638ce0e30a5301.jpg

  • Haha 2
On 7/2/2021 at 9:49 AM, mlr said:

😭 I just want to know my trans temp and IAT 😭

As for tuning, I can barely log on to the interwebs, let alone play with that black magic tuning thing

I can see it now.

"I am going to try tuning my car"........NEK MINNIT.......

DSC_0998.thumb.jpg.339b80a134d6b280ee638ce0e30a5301.jpg

Trans temp and cooler are actually pretty important. I remember my hi-stall adventures, its well worth knowing so you can freak out as it climbs in traffic like I did before I installed a fan for it!

  • Like 1

Bugger

The trans doesn't in fact have a trans temp sensor, no trans temp for me thru the OBD2....spoke to Craigs about this and they believe my temps would be fine anyway as the trans has a big pan and a big air to oil cooler, I asked about if cold fluid temps would cause an issue and they said as long as the engine is at temp the trans will be fine.

Meh, the scanner showed no codes though, which was nice

I'm still happy with what it actually can do

Currently it got volts, coolant temp, IAT and boost

I wish I had this when 1. My alternator died, or 2. When my battery died 6 months later..

IAT goes from about 50°c cruising to 80°c during a long hard pull down the local strip at work, hot yes, but hot IAT is a thing with a PD supercharger, you cannot really tell the difference in performance and the ECU black magic deals with it anyway, #notaracecar, soooooo, if my IAT vary from this I may have a coolant flow issue to the W2A intercooler

This tells me that a PD supercharger is great for the street and strip, where a 5 to 10 second hit is all that is needed, but it would be rubbish for the track where you are constantly on the loud pedal, I would assume heat soak would be rampant after 1/2 lap at your local motorsport park, and possibly the ssme for towing...maybe.....

Coolant temps are a fairly fixed 93° c once up to temp

And boost is boost, unlike a turbo which can overboost, the PD blower either blows, or it doesn't, and of it ain't blowing it's because it's dropped a belt

20210708_154251.thumb.jpg.810d11bb6140684aa3966e497edb951e.jpg

Put a real temp sensor in the line that runs from your trans cooler - That's what I did.

80C while your foot is down? That is ridiculous and has obliterated any desire to ever get on boost.
50C is already massively heat soaked. 80C after a few seconds makes me wonder if your intercooler even exists.

Dang.

  • Like 1
On 08/07/2021 at 10:09 PM, Kinkstaah said:

Put a real temp sensor in the line that runs from your trans cooler - That's what I did.

80C while your foot is down? That is ridiculous and has obliterated any desire to ever get on boost.
50C is already massively heat soaked. 80C after a few seconds makes me wonder if your intercooler even exists.

Dang.

But strangely those temps seem to be a thing when it comes to PD blowers, I initially freaked out but the tuner said it is typical, then rang Harrop who said it's typical, then Googled it....google said it's typical and/or that the sensor might heat soak because of it's location, meh, the car is perfect for what I want so

And I knew going in that a PD isn't as efficient as turbos IRT IAT, but I'm happy to compromise a bit, the car goes like a cut snake from idle

Craigs suggested if I really want trans temp to get a bung tapped into the pan for the most accurate temp, I might get this done next trans service

I will chase up some logs from a mates car for reference, it is very similar. I recall it will heat soak high but then giving a squirt will go lower due to airflow .

 

Lsa engines go up like crazy when giving it a blast. Easily add at least 20 degrees over a quarter mile pass. Those intercollegiate in the blower are laughably small.

 

Don't look at interchillers. Don't think  about having a system that gives you air inlet temps below zero.

 

 

 

On 09/07/2021 at 9:02 AM, Ben C34 said:

I will chase up some logs from a mates car for reference, it is very similar. I recall it will heat soak high but then giving a squirt will go lower due to airflow .

 

Lsa engines go up like crazy when giving it a blast. Easily add at least 20 degrees over a quarter mile pass. Those intercollegiate in the blower are laughably small.

 

Don't look at interchillers. Don't think  about having a system that gives you air inlet temps below zero.

 

 

 

What's wrong with interchillers?

On 09/07/2021 at 11:07 AM, Ben C34 said:

Nothing. It's just something else you will look at and buy but don't really need!

 

 

Nothing to see here........

Quietly googles interchillers........again...........yeah, nah, the car is boss for what I use it for and it seriously doesn't need any more power

For the occasional street pull I cannot see there being any real reason

As for unnecessary modifications, well, there is always an electric power steering pump from an Astra, and/or electric water pump, both are not necessary, but for some strange reason I keep googling them........

It's like/is a disease......LOL

  • Like 1

As I was bored at work, and possibly somewhere on the spectrum 

20210709_134913.thumb.jpg.0090b4f2fbc2a03448c77aa23363e346.jpg

I had some of the stuff I used to cover the headers left over.

It's pretty toasty inside the engine bay, hopefully this "may" help with the radiant heat on the cooland lines and reservoir 

And running my WTA lines inline with my 90° coolant lines wouldn't have been helping either

Will it be noticable? I'll see gow it goes next outing. Either way it got me away from actually doing real work

EKO TFIF

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...