Jump to content
SAU Community

Recommended Posts

Trying to find a straight forward answer and see if anyone has had any experience with a 20det ecu in a plus T.
So I have a 20de ecu running in my plus T, stock injectors have been cleaned and a walbro 255 installed with adjustable fpr. It runs fine, boost fine, only on 5psi to be safe but looking to bump it up to about 7-10psi and was wondering if the red 20det injectors will work with the install of a 20det R32 ecu, I have found someone saying the timing is different and therefore will pre ignite etc. Surely someone has experience with this, my other option is a $130 speedlab chip for a plus T to run with red injectors. 

Link to comment
https://www.sau.com.au/forums/topic/480187-rb20det/
Share on other sites

8 minutes ago, Ben C34 said:

Oh sorry, I will try again. Yeah will work sweet. That's why every does it and reccomends it all the time.

 

Is that a better answer? May be the one you are looking for?

Bingo - you get the prize - that's the answer he was looking for !

But Nistune makes better sense ...

Link to comment
https://www.sau.com.au/forums/topic/480187-rb20det/#findComment-7928920
Share on other sites

1 hour ago, Rusty Nuts said:

Have a read of these threads and make up your mind yourself, it will prevent more shit being thrown at you

 

Not sure what your point is Rusty. I didn't read all the way through but the main point is most people (except a fellow Kiwi I know!) used some kind of tuning device - power fc or emanage etc.  No one is saying that you can't add a turbo to a DE motor (although its not the best option) but rather that its difficult to account for different compression ratios, injectors etc without any means of tuning as the OP proposes. 

Link to comment
https://www.sau.com.au/forums/topic/480187-rb20det/#findComment-7928925
Share on other sites

1 hour ago, daninchainz said:

Nope asking if anyone has done it? no one deals with nistune in my area otherwise that’d be fine 

Nistune tuners were hard to find when I started modifying my RB centuries ago so I had a guy modify an R32 ecu to suit but by now most tuners have come on board even though they would rather sell you a Link or a Motec. What is you nearest city?

Link to comment
https://www.sau.com.au/forums/topic/480187-rb20det/#findComment-7928926
Share on other sites

Just now, daninchainz said:

Wellington region 

OK my contacts are in Auckland, Tauranga and Christchurch but try a PM to Lithium  on this site and ask him if he knows anyone who will tune Nistunes in Wellington. You can buy the actual board direct from Nistune but they sometimes come up on TradeMe.

Link to comment
https://www.sau.com.au/forums/topic/480187-rb20det/#findComment-7928929
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...