Jump to content
SAU Community

Recommended Posts

Evening fellow R chassis enthusiests.

I'm currently in a back and forth discussion with myself going further with my 34 gt coupe 

Overall the car is a genuine example of a clean, well maintained r34. Not show car spec by any means but presents and drives great.

question is, given that prices are going throught the Roof (nearly tripled since i bought my first 34 GTT in 2015) and have no signs of stopping anytime soon..(US market bla bla bla)....would it be less frowned apon now to swap the drive train out for gtt spec?  I just don't want to get caught out selling what I have now and not being able to purchase the better model because there is none for sale or because theyve slipped too far out my price range to quickly..

Sorry for the rant...just can't seem to make up my mind for myself

Edited by Jairn01
Link to comment
https://www.sau.com.au/forums/topic/480304-is-now-a-good-time/
Share on other sites

The difference between the (very very few) on carsales looks to be about 10K.

Will 10K cover a gearbox/ECU/Engine swap/tune?

I reckon not, not really, and there's other issues (diff, sensors, also the hassle of doing this).

I say buy that cleanish 20K R34 GTT
https://www.carsales.com.au/cars/details/1999-nissan-skyline-25gt-t-r34-manual/SSE-AD-6532178/?Cr=2

Then sell R34 GT off to a P plater.

Future you would be happier.

  • Like 2
  • Thanks 1
53 minutes ago, Kinkstaah said:

The difference between the (very very few) on carsales looks to be about 10K.

Will 10K cover a gearbox/ECU/Engine swap/tune?

I reckon not, not really, and there's other issues (diff, sensors, also the hassle of doing this).

I say buy that cleanish 20K R34 GTT
https://www.carsales.com.au/cars/details/1999-nissan-skyline-25gt-t-r34-manual/SSE-AD-6532178/?Cr=2

Then sell R34 GT off to a P plater.

Future you would be happier.

I appreciate the feedback, and everything that has been mentioned so far has been going through my head.....aside from swapping in an 8, that's just not gonna happen.

As for the cost, I can get ahold of essientally a complete half cut GTT for roughly 5k minus the tailshaft and rear subframe/diff ect. 

And that's where I'm at an impasse.....I could probably get 12k for the GT as it sits....+5k for the half cut I have ready for the swap, adds up to 17k - Just shy of what's needed to buy a decent GTT and that's if there's any for sale at the time....there's becoming less and less for sale, the want adds are increasingly outweighing the for sale adds.

A GT converted to a turbo is not a GTT.

A GTT front cut is good spares for a GTT.

A gap of a few grand between the cost to build "a half-arsed never gunna be a real GTT" and just buying one, does not seem like a saving worth making. If the GT had a whole pile of parts on it that you couldn't bare to part with, you could still bring many of them over to a freshly bought GTT.

An engine conversion on a GT might as well be "a bloody good one", rather than just slipping in the GTT motor. Why not go for broke if considering a transplant? No-one would consider a GT with a V8 transplanted into to it to be a bad thing. Or a 20B. Well, OK, there's reasons to not like putting a rotary into anything. But it would still be cool. Whereas dropping a 25DET in it is a cop out.

 

  • Like 1
7 minutes ago, GTSBoy said:

A GT converted to a turbo is not a GTT.

A GTT front cut is good spares for a GTT.

A gap of a few grand between the cost to build "a half-arsed never gunna be a real GTT" and just buying one, does not seem like a saving worth making. If the GT had a whole pile of parts on it that you couldn't bare to part with, you could still bring many of them over to a freshly bought GTT.

An engine conversion on a GT might as well be "a bloody good one", rather than just slipping in the GTT motor. Why not go for broke if considering a transplant? No-one would consider a GT with a V8 transplanted into to it to be a bad thing. Or a 20B. Well, OK, there's reasons to not like putting a rotary into anything. But it would still be cool. Whereas dropping a 25DET in it is a cop out.

 

I understand where you're coming from, in the sense that at the end of the day it will still be a GT no matter what I do to it. I'm not trying to pretend it will be somthing it just isn't.

And as for converting it to a ford/Holden/wankel/jz just isn't even a thought in my head, it'll be a neoT/rb26 or i just wont do it.

The whole point of this post is to see if people may consider it to be a financially realistic option given how rapidly these cars are jumping in price, but I've gotten the general vibe and now I'll just look to try put a few extra pennies away as quickly as possible before the inevitable happens, cheers

?

30 minutes ago, Jairn01 said:

I appreciate the feedback, and everything that has been mentioned so far has been going through my head.....aside from swapping in an 8, that's just not gonna happen.

As for the cost, I can get ahold of essientally a complete half cut GTT for roughly 5k minus the tailshaft and rear subframe/diff ect. 

And that's where I'm at an impasse.....I could probably get 12k for the GT as it sits....+5k for the half cut I have ready for the swap, adds up to 17k - Just shy of what's needed to buy a decent GTT and that's if there's any for sale at the time....there's becoming less and less for sale, the want adds are increasingly outweighing the for sale adds.

If it instantly appeared with no stress, and cost $0, you'd be 3k ahead. But I've been down this path and it doesn't cost $0, and doesn't create 0 stress.

Realistically is a stock R34 GTT worth 20K? No not really, you can buy plenty of better (stock) cars for that money. At some point "sensible" is not applicable to these things and its all $ -> Personal, subjective enjoyment

If you want that car to be a turbo.....just add a turbo. Pretend that the GTT never existed (except for perhaps needing a gearbox, diff and brakes from one!) and just treat it as if it was any other NA RWD car that didn't have a turbo option.

The above suggestion is also slightly sarcastic, because I also generally tend to advise against that choice when you can just go out and buy a turbo version of the same car anyway. But it's a perfectly fine way to turn a GT into a turbo car.

Otherwise, what Greg says above is all true. There is no financial sense in any of these ideas. So just choose how you wish to piss your money up against the wall and get to it.

@Kinkstaah as a former workshop mechanic and tyre fitter, can confirm that 20k will in fact get you in the seat of some really fun cars, but for me it's more sentiment than anything, I genuinely enjoy the way these chassis' drive and handle

Edited by Jairn01

Make up a list of all parts that are different/ better between the na and turbo model, then work out what each one will cost to buy and install if it needs to be upgraded. Then factor in more costs for when things don’t go exactly to plan

then think about the legality/ insurance side of things. Will your insurance cover a turbo converted car in the case of an accident? 
i personally  would not do it unless you have some strange emotional attachment to the car.

 

  • Like 1

My 2c

This is only ever worth it if you skip the stock GTT step, e.g. put in a forged RB25, big highmount turbo, big aftermarket brakes, etc etc

Install parts that if you had a stock GTT, you'd end up replacing anyway. 

Go big or buy a real GTT and leave it stock. 

5 hours ago, Murray_Calavera said:

My 2c

This is only ever worth it if you skip the stock GTT step, e.g. put in a forged RB25, big highmount turbo, big aftermarket brakes, etc etc

Install parts that if you had a stock GTT, you'd end up replacing anyway. 

Go big or buy a real GTT and leave it stock. 

Best advice given here so far. The expense of converting to stock parts then later wanting more power and paying twice is silly.

16 hours ago, Murray_Calavera said:

My 2c

This is only ever worth it if you skip the stock GTT step, e.g. put in a forged RB25, big highmount turbo, big aftermarket brakes, etc etc

Install parts that if you had a stock GTT, you'd end up replacing anyway. 

Go big or buy a real GTT and leave it stock. 

I agree with you 100% but to do this legally in my state (SA) I have to get it as close to GTT trim as possible firstly to pass inspection

31 minutes ago, Jairn01 said:

I agree with you 100% but to do this legally in my state (SA) I have to get it as close to GTT trim as possible firstly to pass inspection

Not strictly true. You could go as far as an engineer will let you go. Vehicle Standards just have a preference for such conversions as this to be "to the same spec as factory" because they'd prefer not to have actual modified cars running around. But they will approve a car that has gone straight from NA GT to GTTish + mods if they have given you approval to go ahead based on your application (and the engineer's OK, of course).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...