Jump to content
SAU Community

Recommended Posts

Hi sorry if someone has asked this before..I had a search :(

 

Just wanted to know if front brembo r34 gtr calipers direct fit onto gtt rotors with no issues..

My r34 came with front gold brembos and looking to change the worn down slotted rotors that it came with though im not sure if they are gtt rotors or a little larger or thicker?..thanx 

Link to comment
https://www.sau.com.au/forums/topic/481664-r34-gtr-brembos-on-gtt-rotors/
Share on other sites

Thanks I better do that..was seeing if anyone knew before i jacked it up..  was thinking it must be thicker then a gtt rotor...  though does a larger rotor fit?..  it would only be the thickness difference? Not a height or width difference?..   when I spin the wheel it sounds like the rotor makes a small grind sound when I try spin it..is this normal? Or shouldit free spin with no small grind sound?   ..sux when you get a car and not sure what someone has done or if it's riggt 

No. GT-T rotors are only 310mm diameter. GTR Brembo rotors are 324mm diameter. You cannot put a GTR Brembo on a 310mm rotor.

Just repetition for repetition's sake.

 

But.....GTR Brembo rotors aren't thicker. They're all 30mm. Only the 296mm GTR rotors are 32mm. Right?

1 minute ago, GTSBoy said:

But.....GTR Brembo rotors aren't thicker. They're all 30mm. Only the 296mm GTR rotors are 32mm. Right?

Correct for the R32 GT-R (non V-Spec, Sumitomo calipers) but some just throw on R33 GTS-t rotors as they're a bee's dick cheaper.

 

Haha Oh son of rajab . Its like that haha..I checked the pads and they are gtr bolt line up so few they are brembo gtr....I think i must be thicker as i measured and def past 310mm... came to past 320mm so must be 324mm..sorry to ask is the gtr r34 rotor different I size? Or is it just the thickness..should be right to get gtr r34 rotor it sounds? .thanx so much to all

Are you sure they are R34 GTR calipers? It is very common to install Z33 front Brembo calipers but the rears don't fit.

If you have front a rear Brembos then they would most likely be R34  GTR ones. And the rotors are different between 

BNR34 and Z33.

R32-R34 GTR 324mm rotors are all the same

The Z33 324mm rotors have a different hat height.

You'll need to measure this to work out what you have. Google how to measure rotor hat height and follow instructions.

 

 

 

 

  • Thanks 1

Ahh I'll look...they are the nice gold brembo that the had did z33 have gold?...crZy so z33 calpiers bolt dorr direct into the front if a r34? The bolt pattern to take them on and off...  thanks all I'll measure the height and all and see what size... they seem to take r34 gtr pads though looked up and z33 seems to have the same front pad.. so may be z33 brembos..

Thanx for the help guys..didn't want to buy the wrong one and have my wheels on And of alot..

1 hour ago, seriesII said:

z33 have gold?

Yes, here's a guide I wrote back then when I cared about sharing knowledge lol

http://www.trak-life.com/diy-350z-brembo-brakes-conversion-nissan-skyline-r33-gts-t-gts-gts-4/

  • Like 1
  • Thanks 1
On 18/12/2020 at 3:18 PM, Dose Pipe Sutututu said:

Yes, here's a guide I wrote back then when I cared about sharing knowledge lol

http://www.trak-life.com/diy-350z-brembo-brakes-conversion-nissan-skyline-r33-gts-t-gts-gts-4/

oh wow they do bolt into the same place and just a rotar change.. thank you for that.. seems it could be either brembo.. measure it is it seems. So I'll do that soon. Thanks to all who helped and cleared this up for me.. lol @ when I cared about sharing knowledge 🤣🤣 ..so gets like that 

My dust pan is still on my fronts and has the lip sitll..does this mean mine are r34 brembos and gtr rotors? As my dust pan is not hiting my rotor and has the lip..?..  in this guide for z33 calpiers you need to trim the dust pan lip or remove it for z33 rotors 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...