Jump to content
SAU Community

Recommended Posts

The colour code is in the middle of the vin plate.  What colour is it in real life?

KH2 - Gun Grey Metallic

KG1 - Jet Silver Metallic

KL0 - Spark Silver Metallic

TH1 - Dark Blue Pearl

AH3 - Red Pearl Metallic

732 - Black Pearl Metallic

326 - Crystal White

BL0 - Greyish Blue Pearl (special order)

In other series it means that the car was removed from the production line for another manufacturer to build like Autech etc. Not sure if that applies to your car.

Generally in R32 the engine bay should be a duller version of the original exterior colour, so a red metallic car would have a dark red engine bay

On 1/15/2021 at 10:26 AM, sin- said:

Can you post or PM me a photo of the VIN plate?

 

2 hours ago, BK said:

Where is your actual blue factory build plate. Not the SEVS plate, not the import issued VIN plate - the build plate.

Something stinks....

This was my first ever skyline and did not know what to look for.

It does not have a blue plate like the R33 GTST I have.

I thought because it had the ADR Plate, that it was fine.

Missing build plate is a massive warning sign !

Does your car have any of the things listed in the specs ? HCR32-292195 is definitely supposed to be AH3 red pearl. It is also supposed to have a sunroof. Does it ?

If you had a build plate it would tell you that information, as that chassis code is a series 2 also.

3 hours ago, Francois said:

mine is one of them

No, it's not. It clearly says what it says. Your model code is KRCR32RKRCR32RGASLA and there are 205 cars in that spec, or at least 205 of that spec for whatever car actually is HCR32-292195, because it's not your chassis.

Your Australian VIN issue not being obtainable is another story. Use vincheck, pay $9.90 and see what it says as that information is from the Australian Federal government

Perhaps see if you can get a copy of the import approval from DOTARS for that VIN, it may have further information. De-registration or auction papers from Japan may also be available for HCR32-292195.

But given the factory VIN stamp is not on the firewall HCR32-xxxxxx and there is no Japanese blue build plate, unfortunately it looks no good.

You could also contact Lena Skyline / Lena Engineering / Nam T Le to see what records they have, but presumably the original import was correct and the tags were changed in Australia after compliance.

8 minutes ago, Duncan said:

factory VIN stamp is not on the firewall

Duncan it's hard to see but zoom in - the chassis code actually is stamped in the firewall above the silver riveted VIN plate tag, so the firewall is at least from said chassis number.

As the firewall is a two piece construction, I suspect the entire front firewall section at a minimum has been replaced.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lets say I wanted to buy this, specifically for this purpose. How do I actually perform the function. Can I still buy a Consult-1? Am I about to be burned by the fact my car is a 2000 model Series 2 R34 and thus will be some stupid other system? Do I just need this -> https://obd2australia.com.au/product/nissan-consult-14-pin-to-usb-ddl-diagnostic-interface-with-ftdi-ft232r-chip/ And with what software?
    • That's probably OK. That's a face to face compression joint between two surfaces with the clamping load provided by those bolts. So.... it's unlikely that the bolts will end up feeling that load in shear, unless the clamping surfaces are not large enough, bolts not got enough tension on them, etc etc to prevent the two faces from moving wrt each other. Which... I would hope the designers have considered, seeing as it's probably one of the most important things the upright has to do apart from resist collapsing in its own right. But yes, it would definitely be worth asking them what their safety factor on that part of the design was. I tend to think that the casting, being a casting, is not necessarily the strongest bit of material in the world. It's about an inch square, and when you think about the loads that are being put into it, you have to wonder what safety factor the Nissan boys (and every other OEM engineer who has designed all the millions of other uprights that look essentially the same) used to account for defective casting, aging, severe impacts on the wheel, etc etc. 
    • Those bolts would be orders of magnitude stronger that cast aluminium though.  And its mainly clamping force, not shear they are dealing with?
    • Except all that twisting force that is breaking a cast piece, appears to be going through 4 bolts in the picture Johnny posted of the BryPar one...
    • The smart approach is to use the gearbox loom from the manual car. Makes it a lot easier - just plugs into the switches on the box and plugs into the main loom up near the fusebox. Then you only need to deal with bypassing the inhibit switch. The other approach requires you to use the wiring diagram to identify those wires by colour and location, perhaps even indulging in a little multimeter action to trace them end to end to make sure, and then.... you will have the answers you need. The R34 wiring diagram is available on-line (no, I do not have a link to it myself - I would have to do a search if I wasn't able to go to the copy I have at home).
×
×
  • Create New...