Jump to content
SAU Community

Recommended Posts

Most of the interior wiring is done, finished up some sensor wiring to the bay as well as the switch panel which i have off in this photo. Got the mid drivers net ran through the dash to the bar as well as the side net test fitted.IMG_0204.thumb.jpeg.e9700f830761bef983e1e8c804e490c4.jpeg

  • Like 2
  • 2 weeks later...

Couple of small updates. Got the new clutch in, now waiting on the flywheel to be resurfaced and then to mate the engine with the transmission which will be filled with Torco RTF or MTF. Also got the new brake master onto the car.

IMG_0316.thumb.jpeg.9e02fb4cf21a888c8dbe673c4b286ad3.jpeg

Hey guys, I’m looking at some brake options and wondering what people are running for enduro or circuit race cars in general. I would love to stick with AP Racing as I’ve driven with them a lot before, but not sure if they make a kit for the 32 gtst. Will a BnR kit fit on the HCr? Or do you have to use a 300zx kit? Thanks for any help.

Pretty sure no-one on here is doing serious endurance racing. I would use AP if I was, especially in your case as you've used them before. I run porsche 6 spots on standard size discs with winmax pads but mostly do sprint races and rallies.

My understanding is all R32/33 stuff will bolt on, and R34 GTR is only different in mounting bolt diameter (14 instead of 12 which is no big deal to address); definitely for GTR and 33 GTST but I am not 100% for 32 GTST. Others here should be able to confirm.

  • Like 1
1 hour ago, Duncan said:

Pretty sure no-one on here is doing serious endurance racing. I would use AP if I was, especially in your case as you've used them before. I run porsche 6 spots on standard size discs with winmax pads but mostly do sprint races and rallies.

My understanding is all R32/33 stuff will bolt on, and R34 GTR is only different in mounting bolt diameter (14 instead of 12 which is no big deal to address); definitely for GTR and 33 GTST but I am not 100% for 32 GTST. Others here should be able to confirm.

Awesome thanks for the help, maybe someone will confirm at some point.

The mounting points for R32/R33 calipers is same (so that's why you can bolt on R32/R33 GT-R brakes onto GTS-t and 5 stud Silvias etc.). So an 'R32 Skyline' kit should fit (it's just the dogbone adaptors I believe), although you should be able to confirm with some measuring.

  • Like 1
13 hours ago, niZmO_Man said:

The mounting points for R32/R33 calipers is same (so that's why you can bolt on R32/R33 GT-R brakes onto GTS-t and 5 stud Silvias etc.). So an 'R32 Skyline' kit should fit (it's just the dogbone adaptors I believe), although you should be able to confirm with some measuring.

Thanks, this helps lots

  • 4 weeks later...

Welp, pretty big update here.  The past week has been pretty busy prepping for the first shakedown day that happened this past Saturday. Mapped the car and was able to get a safe 280 whp at only 8-10 psi. Turned the ignition advance up top to around 19 degrees and this makes for a very linear power delivery. Feels similar to an s54 with a bit less downlow torque. The shakedown day went well I had another driver fly in for the week and he was able to get about an hour in the car but wasn't used to rhd hand drive so had a rough time with the shifts. He unfortunately had a missshift going into 4th went into 2nd. He said it only rev'd up to about 8 grand so hopefully no damage, ran for about an hour after that and all seemed fine. All and all got a good 4-5 hours on track and a lot of good data. Not sure how I like my current alignment that will be my next change. Anyways heres a screenshot of me in the car.

IMG_0560.jpeg.a6f1ce326568029f07e9d488d6b20df4.jpeg

Edited by smart_garrett
  • Like 2
  • 2 weeks later...

Looking for some input on shocks and springs. What brand/ spring rates are people running for their road race gtst's? I was looking at the MCA line up but haven't heard much about them over here in the States. I was also thinking of possibly getting a set of custom Penske racing shocks built up, but again not sure what kind of specs to use. I think someone name Ben on here went down that route? Id love to hear some input.

Edited by smart_garrett
  • 1 month later...

Have had the car out for a couple test days now. Everything seems to be going great. I've done a lot of data logging and have been reviewing it all. My friend and I made up a livery for the car too which came out pretty good. Obviously the car is still missing all of the aero elements that I'm looking to add as I'm currently playing around with some cfd for a rear airfoil. The empty space up front will be filled mostly with series sponsored logos and the number plates. 

IMG_0837.thumb.JPEG.d04bffa718bcf8a97dda7003232a7a63.JPEG 

Another big thing I'm really starting to notice is how over damped/under spring these coilovers i have now are (cusco), especially on slow corners. I've emailed MCA to see if I can work something out with them. If not ill have to get a set of custom penskes.

 IMG_0849.thumb.JPEG.2d0f393464e38d5e40e471cdba5d9747.JPEG

Edited by smart_garrett
  • Like 3
  • 2 weeks later...

Pushed the car hard at a more technical track that also has a long straight. I noticed the clutch started to get a bit spongey feeling after about 3 30 min sessions. Didn't help it when the car cooled off so I'm wondering if I boiled over the fluid. Brakes felt very nice the whole time which I think surprises a lot of people being they're not some big fancy kit. DBA rotors with new z32 calipers, steel lines, and porterfield r4 race pads. Will lock the tires up with no fade consistently over a 1.5 hr stint. Haven't been able to get out longer than that but I'm sure they will get a bit tired after a couple hours.

One thing that im working on is getting the car to drive like a naturally asperated bmw 6 cyl. The rb20 is right with them once it gets wound up, but before that it really struggles, which you really notice on corner exit. I have adjusted my driving style for the turbo car, which generally involves a tiny bit different apex point and getting on throttle a lot earlier. Even with this, its still a bit sluggish. And no, im not going to put a 25 in it and have it grenade after every 25 race hours, at least not yet hah. Other than that and the clutch issue, this thing has been a tank so far in testing.

The next thing on the list is to cut the hood and fit a "gtr style" hood (bonnet) lip. Along with some standard hood vents.

 

Also saw this trailer that I would love to have with that colour, quite a bit different than my pastel white hitch pull.

 

64392393347__DB15C5B2-0E9E-40EA-A8A3-8828E1E7B812.fullsizerender.jpeg

IMG_0943.JPEG

Edited by smart_garrett

That is pretty weird to have a spongey clutch, I've never had an issue with overheated clutch fluid, it just doesn't have the heat coming into it like brakes do. I do run a direct line from clutch master to slave rather than via that intricate factory damper. Suggest you change to a direct line if you aren't and of course it will be bled at same time.

For the corner exit, do you have the option to run a shorter diff ratio (obviously need to consider likely highest speed in top gear at the tracks you go to). And of course if you are having a rear traction problem getting on it earlier, a little less rear camber and a good diff can help

33 minutes ago, Duncan said:

That is pretty weird to have a spongey clutch, I've never had an issue with overheated clutch fluid, it just doesn't have the heat coming into it like brakes do. I do run a direct line from clutch master to slave rather than via that intricate factory damper. Suggest you change to a direct line if you aren't and of course it will be bled at same time.

For the corner exit, do you have the option to run a shorter diff ratio (obviously need to consider likely highest speed in top gear at the tracks you go to). And of course if you are having a rear traction problem getting on it earlier, a little less rear camber and a good diff can help

Thanks, yea I have a direct line from the master to the slave right now so I’m not sure what it is, out of town right now so can’t investigate yet. The shorter ratio is definitely something I’ve been thinking about since I’m looking at some 1.5 way options. Camber wise I’m at about 4.5* negative in the front and 2.5* in the rear, definitely a bit aggressive but has been pretty even wear so far with pretty neutral toe.

I run Penske in my Gtst, but it took a bit of mucking around the get the valving right. 450lb front and 375lb rear works for me.

You can run a 4.6:1 diff out of a sentra that will mask the lag.  But keeping a small turbo and running E85 is really the only way to minimise the lag wihout opening the engine

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...