Jump to content
SAU Community

Recommended Posts

Thank you, all.

if I asked my mechanic to keep the parts he takes off, would this sound weird? I don’t want him to think I don’t Trust him but at the same time I want to be certain that the parts were replaced with brand new ones. Also, if they happen to be in reasonable condition I wouldn’t mind selling them off on gumtree…

They are your parts, so you might get a strange look but it's a valid request. I've known some places in the past that keep and show all the parts they remove to build trust (not that most people would know if it actually came off your car, I guess you are safe with GTR heater hoses...)

On 6/11/21 at 7:47 PM, Duncan said:

They are your parts, so you might get a strange look but it's a valid request. I've known some places in the past that keep and show all the parts they remove to build trust (not that most people would know if it actually came off your car, I guess you are safe with GTR heater hoses...)

Thanks for that. Do you mind me asking what exactly you meant by “you’re safe with gtr heater hoses”?

No one’s going to buy second hand coolant hoses off a gtr, the effort/cost involved wouldn’t be worth risk putting second hand ones on and them failing 

  • Thanks 1
On 10/29/2021 at 2:29 AM, sonic99 said:

Does anyone know how long it would take or how much it would cost to have heater and coolant hoses replaced on a GTR R33?

What coolant hoses in particular? There are a ton of coolant hoses and pipes in an R33 GT-R. Some of them are not that bad to get to. Some of them really, really suck to get to. Personally I am replacing every vacuum line and coolant line on the intake side of the engine in addition to the heater core lines and my Amayama order was something like 800 USD in hoses/clamps and that didn't include the 40 USD rear block heater fitting or 40 USD front coolant hose that has somehow become a Nismo Heritage part. Keep in mind that with a car this old unless every previous owner was religious about changing coolant on time it is all but guaranteed that multiple metal coolant pipes have significant rust and pitting. Either you can wet blast off the rust and fill the pits with epoxy/JB weld or source a new replacement and try some coolant hose grease on the barbs to try and discourage corrosion from forming in the future. The coolant pipe that goes from the heater core along the firewall to the intake side of the engine is 116 dollars from Amayama/Nissan Japan not including shipping/customs charges. It is also a huge pain to remove because of the dimensions of the part. Wrap all edges of it in something soft unless you enjoy leaving visible marks in the engine bay paint like I did. 

Also as others have said nobody is going to buy used hoses. Half of them will tear upon removal in a way that makes them unusable, even if the majority of the hose is intact you will almost certainly have the ends of the hose lose most of their inner lining as the corrosion has penetrated the rubber and will not come off cleanly. For the effort it takes to get to most of these hoses I cannot imagine even contemplating throwing a set of old hoses back on and praying they don't burst.

Also, for anything under the intake manifold/plenum it is penny wise pound foolish to even bother with anything but OEM new molded hoses. It is a rats nest down there. Every single hose is molded to fit in a very specific position, trying to make do with generic hose will cost you more in time and wasted effort than the cost of the OEM part.

Edited by joshuaho96
  • Thanks 1
On 11/11/21 at 6:39 AM, Duncan said:

I was simply saying that they aren't going to leave your old hoses on and show you some they took off another 33 gtr that had gone through there.

Sorry the original poster was talking about trying to sell them if they were still in working order 

  • Thanks 1

No I'm sorry, I should have quoted the post I was responding to! :3some:

On 10/11/2021 at 9:47 PM, sonic99 said:

Thanks for that. Do you mind me asking what exactly you meant by “you’re safe with gtr heater hoses”?

  • Thanks 1
On 11/17/2021 at 1:14 AM, sonic99 said:

How much coolant will be required and which one should I get?

8.5L is the system capacity, how close you will get to draining all of it depends on how far you go in draining the car. Coolant choice depends on what coolant you already have. If you have the Nissan green or blue then use that. If you have something else in the system then get the same. If you don't know what you have and don't want to take chances then flush the system with distilled water, then refill with whatever you want.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Short answer: No. Medium answer: No, because you still need to conjure the things out of thin air to bolt them to a NA to make it a NA+T. Long Answer: No - The things you need to conjure - meaning a turbo, intercooling, manifolds, exhaust, intake/manifold/piping, clutch, injectors, fuel pump, AFM (?), ECU + Wiring (woo, N/A loom fun) have to come from somewhere. You could have many scavenged these things from an OEM car that someone had upgraded from and use some of these. This will be cost prohibitive now, especially so in the USA. You'd probably pay the same for newer, upgraded components that are better than old OEM stuff from 25-30 years ago. None of these big ticket items are re-usable for the N/A car. Why not buy new and upgrade while you're there? The only real consideration is turbo and fuel sizing and determining whether you want to stay within the bounds of the OEM engine or get into rebuild territory. These limits ARE lower with a N/A motor and especially N/A gearbox at the starting point. And if you're gonna upgrade those then you may as well consider having them built to begin with. Because everyone here knows you're never far from that next engine rebuild once you start making the power you want... The cars you see on the internet and SAU etc have been built over decades. If you're really clued in... you would sell your US car to somebody for what you paid for it. You would then scour AU JDM pages or SAU and buy a car like Dose's on this forum with your powerful American Dollar. This will save you so much money in the long term. Importing it could be tricky. Or it might not because USA. I have long said the only reason 90's Japanese stuff took off was because a) Japanese people had Japanese cars so that is what they used b) Australians could import these cars to Australia with very minimal changes and use them on the road here c) Neither country had well-priced access to US or EU Sports Cars. I don't believe the JDM scene would have taken off in Australia at all if we had EU priced EU BMW M offerings, or more especially the AUS V8 Scene would never have existed if we had the multitude of US cars like Camaros, Mustangs, Corvettes at the prices you folks do. After all - Do the math. I would say put a V8 in your R34 and that's the smart way forward. It is. I did it. I know this from my own experience. But at that point there's no reason to simply not buy a C5 or C6? It would be simpler and easier and cheaper and bette-
    • Reading all this... hurts lol. I have an ENR34 5MT and I paid an inflated USA price for the car alone, had to do tons of preventative maintenance past that, and so I'm over $30K USD into the car already and haven't even touched power.  I wanted to +t it. Not even trying to make GTR numbers, I'd be happy with 250hp.  Can I get away with paying much less to make that happen?
    • Damn you’ve done well, definitely snapping necks.
    • Great weekend and event. Open fire at the caravan park, perfect weather all day and a great feed and a couple of drinks at at awesome country pub.
    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
×
×
  • Create New...