Jump to content
SAU Community

Recommended Posts

A few months ago I purchased an R33 rolling shell and have been working on restoring it. After some bodywork and checks, I've been able to identify it as a 1994 Nissan Skyline R33 GTS-25T Type M, and found out it was imported into Australia back in 2005 by a previous owner. I found the dashboard and gauge cluster were Nismo, and just assumed the previous owner had put them in for some reason. However, I recently discovered that they had made GTS-25T Type Ms in Nismo spec, something I hadn't known before. I want to verify, so does anyone know of any other indenfiers or defining features that can confirm whether or not its a Nismo? Note: No engine, transmission, exhaust, spoiler, or bodykit. All had been removed when I purchased it. 

Link to comment
https://www.sau.com.au/forums/topic/483764-identifying-nismo-gts-25t/
Share on other sites

On 14/06/2022 at 4:32 PM, Duncan said:

I am reasonably sure there was no "nismo" r33 gtst, what information did you have on such a beast? If you check your vin in FAST it might tell you if there is something special

I'd found these while doing research on the gauge cluster 

images (1).jpeg

116652764_10158910177877112_761590868198701898_n.jpg

As others have mentioned it's most likely the Nismo package option.

I do remember many years ago there was a guy on this forum who owned a Nismo optioned gunmetal grey series 1. it was a Nismo pre-production concept car which was set to be a GTS25t equivalent of the 400R. it was pulled from the assembly line and never made it. it was only discovered from official nissan marketing material left in the boot.

On 14/06/2022 at 10:12 PM, dyl33 said:

That nismo wing is filthy.

Well, let's just say it was "period correct". You would have been the coolest person in the carpark under the freeway in 1995

  • Like 2
On 14/06/2022 at 10:23 PM, mlr said:

I new I seen something somewhere 

Build this, call it the long lost number 4

 

 

 

On 15/06/2022 at 6:15 AM, Duncan said:

Well, let's just say it was "period correct". You would have been the coolest person in the carpark under the freeway in 1995

So was this so called 2500R actually a thing ? As in did this car infact come from Omori ?

On 6/14/2022 at 4:41 PM, BK said:

 

So was this so called 2500R actually a thing ? As in did this car infact come from Omori ?

It's maybe plausible in some regards, but the pictures show some pretty obvious modifications that wouldn't have been how Nismo does things. The missing fan shroud is a weird one.

On 15/06/2022 at 9:41 AM, BK said:

So was this so called 2500R actually a thing

yeah, saw it myself in real life. Was in Sydney many years ago, no idea where it went.

 

OP, you can search your VIN in gtr-registry.com and see what comes up. But you will find it's a regular GTS25t with some Nismo aftermarket parts (fairly common).

 

On 15/06/2022 at 11:38 AM, niZmO_Man said:

yeah, saw it myself in real life. Was in Sydney many years ago, no idea where it went.

 

OP, you can search your VIN in gtr-registry.com and see what comes up. But you will find it's a regular GTS25t with some Nismo aftermarket parts (fairly common).

Wow - just read the whole thread on that so called 2500R prototype. I get it is a real car, but it didn't actually go back to Nismo for anything did it ?

What a really, really shit thread to read... so confusing and contradictory on the claims made.

On 15/06/2022 at 1:24 PM, BK said:

Wow - just read the whole thread on that so called 2500R prototype. I get it is a real car, but it didn't actually go back to Nismo for anything did it ?

No idea, very good point. It was a good dream though hehe.

Yeah, seems the whole Nismo thing was just a kit. Not too disappointed, still my dream car either way, and the gauge cluster is sweet. I have fallen in love with the idea of a GTS-25T Type M Nismo though, so I might pursue a Nismo-inspired build! Chassis no. is ECR33-017724 if anyone was curious. 

20220614_171045.jpg

20220614_171047.jpg

4b25b06928432efb25162a9ac44c4146.jpg

  • Like 1
On 15/06/2022 at 5:35 PM, GTSBoy said:

Imagine all that love and attention paid to a car that actually looks good. Like a 32 or a 34?

While I disagree with your implication that the R33 looks bad, perhaps this R34 GTT Nismo kit tickles your fancy? I find the wing particularly beautiful for the car 

RDT_20220615_1814555871650123261301206.jpg

image_5092b26c-d6fe-4c8b-b114-72fbf9edb24e_1024x1024.jpg

10286658_201422520137.jpg

Oh no. That R34 wing is dreadful. Looks like it belongs on a Honda. The whole back of the kit is bad actually. Only the front is OK.

I belong to the "R33s are boats that look like a Maxima aggressively rear ended a Magna" camp. The profile of the car is poor. The length between the back edge of the door and the rear wheel arch is just too long on a 33. The front is bland in a Magnaesque way and the rear is just f**ked up.

The R32 maintains the correct proportions from the cars that created the look (ie, the early Mustangs, and to an extent the earliest Skylines) that sort of survived in the 70s Skylines but definitely was solidly in the design language of the 80s Skylines. The R32s only blemish is really the front end of the bonnet. But that can be changed.

The R34 brought back the correct profile and proportions. It was actually confrontingly square when it first came out, but that soon passed. The only blemish is the slightly incorrect taillights, but they are much better than the very wrong lights on the 33 (and the lower end and Aussie built 31s). Equal sized stoveplate rear lights are a requirement for a proper Skyline.

You have to slap a lot of tupperware onto a 33 to mask all the problems.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
    • So I found this: https://www.efihardware.com/temperature-sensor-voltage-calculator I didn't know what the pullup resistor is. So I thought if I used my table of known values I could estimate it by putting a value into the pullup resistor, and this should line up with the voltages I had measured. Eventually I got this table out of it by using 210ohms as the pullup resistor. 180C 0.232V - Predicted 175C 0.254V - Predicted 170C 0.278V - Predicted 165C 0.305V - Predicted 160C 0.336V - Predicted 155C 0.369V - Predicted 150C 0.407V - Predicted 145C 0.448V - Predicted 140C 0.494V - Predicted 135C 0.545V - Predicted 130C 0.603V - Predicted 125C 0.668V - Predicted 120C 0.740V - Predicted 115C 0.817V - Predicted 110C 0.914V - Predicted 105C 1.023V - Predicted 100C 1.15V 90C 1.42V - Predicted 85C 1.59V 80C 1.74V 75C 1.94V 70C 2.10V 65C 2.33V 60C 2.56V 58C 2.68V 57C 2.70V 56C 2.74V 55C 2.78V 54C 2.80V 50C 2.98V 49C 3.06V 47C 3.18V 45C 3.23V 43C 3.36V 40C 3.51V 37C 3.67V 35C 3.75V 30C 4.00V As before, the formula in HPTuners is here: https://www.hptuners.com/documentation/files/VCM-Scanner/Content/vcm_scanner/defining_a_transform.htm?Highlight=defining a transform Specifically: In my case I used 50C and 150C, given the sensor is supposedly for that. Input 1 = 2.98V Output 1 = 50C Input 2 = 0.407V Output 2 = 150C (0.407-2.98) / (150-50) -2.573/100 = -0.02573 2.98/-0.02573 + 47.045 = 50 So the corresponding formula should be: (Input / -0.02573) + 47.045 = Output.   If someone can confirm my math it'd be great. Supposedly you can pick any two pairs of the data to make this formula.
    • Well this shows me the fuel pump relay is inside the base of the drivers A Pillar, and goes into the main power wire, and it connects to the ignition. The alarm is.... in the base of the drivers A Pillar. The issue is that I'm not getting 12v to the pump at ignition which tells me that relay isn't being triggered. AVS told me the immobiliser should be open until the ignition is active. So once ignition is active, the immobiliser relay should be telling that fuel pump relay to close which completes the circuit. But I'm not getting voltage at the relay in the rear triggered by the ECU, which leaves me back at the same assumption that that relay was never connected into the immobiliser. This is what I'm trying to verify, that my assumption is the most likely scenario and I'll go back to the alarm tech yet again that he needs to fix his work.      Here is the alarms wiring diagram, so my assumption is IM3A, IM3B, or both, aren't connected or improper. But this is all sealed up, with black wiring, and loomed  
    • Ceste, jak se mas Marek...sorry I only have english keyboard. Are you a fan of Poland's greatest band ever?   
×
×
  • Create New...