Jump to content
SAU Community

Recommended Posts

20 hours ago, robbo_rb180 said:

I'd say the biggest issue will be the 2 cheap fans on it that came with the radiator. Ditch them and get the factory clutch fan and shroud on. The cheap stuff doesn't move enough air.

The only electric fans worth putting on are either spal or maradyne. In 14 or 16 inch with proper shroud.

I use cheaper radiators but always use factory fan or the mentioned electric ones with no issues. 

Sorted!! F**king loving it! Ditched the twin fan setup for the single 14. Running perfect! Cheers robbo_rb180 because the twin fans were brand new, if you hadn’t mentioned it I wouldn’t have even spared a thought for them being the issue! I know its not the clutch fan setup every one suggests but its a win either way. So cheers to everyone for chiming in, made my year ya bloody legends!!!

  • Like 4
3 hours ago, darkoh69 said:

 as the old saying goes if aint broke dont fix it  

Yeah, as in shouldn't have changed the factory stuff there in the first place which is why Dose Pipe said what he said.

  • Like 4
  • Thanks 1
  • Haha 3
9 hours ago, BK said:

Yeah, as in shouldn't have changed the factory stuff there in the first place which is why Dose Pipe said what he said.

Factory stuff broke years ago. All I could get at the time was a 14 inch electric & a cheap Chinese thick alloy radiator which for many years after never let me down which is why I said what I said

Oil temp on track will hit 150C in a lap or two. Or at least it did for me. So yeah, oil cooler pretty mandatory for track fun.

110C is the exact point the needle moves from "middle" to high in a R34. 109C is middle. So there is no 3/4 anything on a 34, but yes this thread is about a R33 so who knows whether that is accurate.

OEM fan is best. Always. Nigh on impossible to break the OEM fans. OEM fan without shroud is still pretty much the 2nd best thing lol.

5 hours ago, darkoh69 said:

Most later model cars run em

Yes, as part of a system that was designed around having that fan. On RB engined cars, the radiator was sized around the air flow that could be pulled by the engine driven fan, which is an enormous number compared to what you can pull with even the best electric fans.

So, your experience is that it works. But when you present it with a challenge, such as idling in a traffic jam at 45°C ambient air T, 50+°C road temperature (which is a common event where I drive mine) then you will likely find that the electric fan version will suffer a lot earlier than the engine fan one will. And that is why there are only a couple of 14" electric fans that people say are acceptable, because these are the only ones that have managed to get close to the performance of the stock setup, with all others found to be not-as-good(TM).

  • Like 4
11 hours ago, Kinkstaah said:

oil temp on track will hit 150C in a lap or two. Or at least it did for me. So yeah, oil cooler pretty mandatory for track fun.

Jesus, that's way too high!

I run a 25 row Setrab core in the driver side guard and I can manage to keep oil sub 130°C doing continuous hot laps (well did, till the engine seized lol).

2 hours ago, Dose Pipe Sutututu said:

Jesus, that's way too high!

I run a 25 row Setrab core in the driver side guard and I can manage to keep oil sub 130°C doing continuous hot laps (well did, till the engine seized lol).

Should’ve had electric fans engine probably still be spinning 😜

  • Haha 2
47 minutes ago, darkoh69 said:

Should’ve had electric fans engine probably still be spinning 😜

Haha actually the motor seized because the sump was sucked dry around a corner and the oil couldn't return to the sump fast enough.

 

29 minutes ago, Dose Pipe Sutututu said:

Haha actually the motor seized because the sump was sucked dry around a corner and the oil couldn't return to the sump fast enough.

 

 

  • Like 2
5 hours ago, Dose Pipe Sutututu said:

Jesus, that's way too high!

I run a 25 row Setrab core in the driver side guard and I can manage to keep oil sub 130°C doing continuous hot laps (well did, till the engine seized lol).

This was pre-oil cooler on the RB! Post Oil cooler it sat at about 100C ish doing the same kind of hot laps. This was with the cooler in the driver side.

Post change to LS I had the cooler in the passenger side, and noticed it actually cooled better there than in the drivers side. But I moved it back to the driver side due to my intake. Did 70 hot laps at Sandown and water stayed at 87 and oil was happy at about 105.

With thermofansomg (but they are OEM AU ones). Utterly irrelevent to this discussion other than OEM VERY GOOD YES YES.

  • Like 2
1 hour ago, Kinkstaah said:
With thermofansomg (but they are OEM AU ones). Utterly irrelevent to this discussion other than OEM VERY GOOD YES YES.

No I see relevance in this. It seems like your saying ‘oem very good, but thermos are very good also.’ & ‘In your experience falcon thermos are better’. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. This is just my curiosity because iam sure the tuner figure something out...but either way i want to ask. The "problem" is that the Nistune ECU (Stagea FW and RB25DET NEO from Stagea) sees many times the speed than the speedo does(he says the speedo show 120 km/h - correct speed and the ECU shows like 510km/h ) I told him that this car/tranny getting speed from rear diff. If iam not mistaken the RB25DET NEO "need" to see tranny speed sensor? (my tranny has the plug for it). So couple of "question" If he connects/wire the speed sensor to the tranny...are the signals gonna intervene and if...what if he disconnects the rear diff one and the speedo stops working? Or the "new" sensor from the tranny "take over" and will not going need the one from diff? As i said i know he figure/get that done...iam just curious to know what are the solutions 🙂 
    • Your IACV is set to idle too low. You need to adjust it via the screw Duncan mentioned. From memory it should be 650rpm with the valve electrics unplugged. What is it trying to idle at with the IACV plugged in?
    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
×
×
  • Create New...