Jump to content
SAU Community

Recommended Posts

20 hours ago, robbo_rb180 said:

I'd say the biggest issue will be the 2 cheap fans on it that came with the radiator. Ditch them and get the factory clutch fan and shroud on. The cheap stuff doesn't move enough air.

The only electric fans worth putting on are either spal or maradyne. In 14 or 16 inch with proper shroud.

I use cheaper radiators but always use factory fan or the mentioned electric ones with no issues. 

Sorted!! F**king loving it! Ditched the twin fan setup for the single 14. Running perfect! Cheers robbo_rb180 because the twin fans were brand new, if you hadn’t mentioned it I wouldn’t have even spared a thought for them being the issue! I know its not the clutch fan setup every one suggests but its a win either way. So cheers to everyone for chiming in, made my year ya bloody legends!!!

  • Like 4
3 hours ago, darkoh69 said:

 as the old saying goes if aint broke dont fix it  

Yeah, as in shouldn't have changed the factory stuff there in the first place which is why Dose Pipe said what he said.

  • Like 4
  • Thanks 1
  • Haha 3
9 hours ago, BK said:

Yeah, as in shouldn't have changed the factory stuff there in the first place which is why Dose Pipe said what he said.

Factory stuff broke years ago. All I could get at the time was a 14 inch electric & a cheap Chinese thick alloy radiator which for many years after never let me down which is why I said what I said

Oil temp on track will hit 150C in a lap or two. Or at least it did for me. So yeah, oil cooler pretty mandatory for track fun.

110C is the exact point the needle moves from "middle" to high in a R34. 109C is middle. So there is no 3/4 anything on a 34, but yes this thread is about a R33 so who knows whether that is accurate.

OEM fan is best. Always. Nigh on impossible to break the OEM fans. OEM fan without shroud is still pretty much the 2nd best thing lol.

5 hours ago, darkoh69 said:

Most later model cars run em

Yes, as part of a system that was designed around having that fan. On RB engined cars, the radiator was sized around the air flow that could be pulled by the engine driven fan, which is an enormous number compared to what you can pull with even the best electric fans.

So, your experience is that it works. But when you present it with a challenge, such as idling in a traffic jam at 45°C ambient air T, 50+°C road temperature (which is a common event where I drive mine) then you will likely find that the electric fan version will suffer a lot earlier than the engine fan one will. And that is why there are only a couple of 14" electric fans that people say are acceptable, because these are the only ones that have managed to get close to the performance of the stock setup, with all others found to be not-as-good(TM).

  • Like 4
11 hours ago, Kinkstaah said:

oil temp on track will hit 150C in a lap or two. Or at least it did for me. So yeah, oil cooler pretty mandatory for track fun.

Jesus, that's way too high!

I run a 25 row Setrab core in the driver side guard and I can manage to keep oil sub 130°C doing continuous hot laps (well did, till the engine seized lol).

2 hours ago, Dose Pipe Sutututu said:

Jesus, that's way too high!

I run a 25 row Setrab core in the driver side guard and I can manage to keep oil sub 130°C doing continuous hot laps (well did, till the engine seized lol).

Should’ve had electric fans engine probably still be spinning 😜

  • Haha 2
47 minutes ago, darkoh69 said:

Should’ve had electric fans engine probably still be spinning 😜

Haha actually the motor seized because the sump was sucked dry around a corner and the oil couldn't return to the sump fast enough.

 

29 minutes ago, Dose Pipe Sutututu said:

Haha actually the motor seized because the sump was sucked dry around a corner and the oil couldn't return to the sump fast enough.

 

 

  • Like 2
5 hours ago, Dose Pipe Sutututu said:

Jesus, that's way too high!

I run a 25 row Setrab core in the driver side guard and I can manage to keep oil sub 130°C doing continuous hot laps (well did, till the engine seized lol).

This was pre-oil cooler on the RB! Post Oil cooler it sat at about 100C ish doing the same kind of hot laps. This was with the cooler in the driver side.

Post change to LS I had the cooler in the passenger side, and noticed it actually cooled better there than in the drivers side. But I moved it back to the driver side due to my intake. Did 70 hot laps at Sandown and water stayed at 87 and oil was happy at about 105.

With thermofansomg (but they are OEM AU ones). Utterly irrelevent to this discussion other than OEM VERY GOOD YES YES.

  • Like 2
1 hour ago, Kinkstaah said:
With thermofansomg (but they are OEM AU ones). Utterly irrelevent to this discussion other than OEM VERY GOOD YES YES.

No I see relevance in this. It seems like your saying ‘oem very good, but thermos are very good also.’ & ‘In your experience falcon thermos are better’. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
×
×
  • Create New...