Jump to content
SAU Community

Recommended Posts

Anyone have any experience with these ?  https://artecperformance.com.au/products/artec-nissan-skyline-rb-exhaust-manifold-v-band-reverse-rotation

 

What got my interest was the 7.1kg, my last 6boost was solid 12kg.  Not to mention it didn't fit... wait i just did :) 

I also like the off the shelf blanket option.  I've had real heat issues with my current setup. 

 

The reverse rotation is a bit tits as it means new turbo and new piping. 

Link to comment
https://www.sau.com.au/forums/topic/484276-artec-manifolds/
Share on other sites

12 hours ago, Butters said:

Anyone have any experience with these ?  https://artecperformance.com.au/products/artec-nissan-skyline-rb-exhaust-manifold-v-band-reverse-rotation

 

What got my interest was the 7.1kg, my last 6boost was solid 12kg.  Not to mention it didn't fit... wait i just did :) 

I also like the off the shelf blanket option.  I've had real heat issues with my current setup. 

 

The reverse rotation is a bit tits as it means new turbo and new piping. 

mine will be going on in the next month or so ish by March latest think by powers of deduction we might have same tuner also

 

unfortunately mine wont be back to back as im changing turbos also

Edited by bcozican
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/484276-artec-manifolds/#findComment-7973532
Share on other sites

I've got one, just fitting up now...

I also opted for new studs and went the titanium route and access to the two lower front nuts is basically impossible with a conventional socket or ring spanner... Think I'm going to have to get creative 🙃

Haven't heard of anyone having this issue but I guess they are still relatively newish...

thumbnail_IMG_5829.jpg

thumbnail_IMG_5827.jpg

  • Like 3
Link to comment
https://www.sau.com.au/forums/topic/484276-artec-manifolds/#findComment-7973579
Share on other sites

You can get two different sized titanium nut kits(different makers), can't tell from pics but I assume yours are the 12mm ? 

 

Please keep posting pic's keen to hear / see all the good and bad ! 

 

Seems like you have a lot of clearance to strut tower, this is in the 32R ? 

Also interested in seeing potential space for a new turbosmart straight gate 

 

Also looks like so so much room underneath compared to a 6boost, not sure what you would use it for but I am sure the AC lines would appreciate it :)

Edited by Butters
Link to comment
https://www.sau.com.au/forums/topic/484276-artec-manifolds/#findComment-7973581
Share on other sites

57 minutes ago, Butters said:

You can get two different sized titanium nut kits(different makers), can't tell from pics but I assume yours are the 12mm ? 

 

Please keep posting pic's keen to hear / see all the good and bad ! 

 

Seems like you have a lot of clearance to strut tower, this is in the 32R ? 

Also interested in seeing potential space for a new turbosmart straight gate 

 

Also looks like so so much room underneath compared to a 6boost, not sure what you would use it for but I am sure the AC lines would appreciate it :)

wasn't aware of the different sized stud kits 😕 These are from EFI Solutions...

Ye the clearance so far seems pretty good, tis a 32 GTR... Fabbing dump pipe etc. now...

I'm only running a conventional Turbosmart external gate...

Was hoping I'd get away with not having to move the Power Steering Reservoir but that was probably a tad naïve of me ;)

Link to comment
https://www.sau.com.au/forums/topic/484276-artec-manifolds/#findComment-7973587
Share on other sites

Looks tops, nice to see a picture that isn't straight form Artec. I'll be interested to hear how you go with that front stud, looks like a bastard.

Mine is en route from Brisvegas to Melbourne now, but reverse rotation G30 turbos are out of stock. FFS.

Link to comment
https://www.sau.com.au/forums/topic/484276-artec-manifolds/#findComment-7973588
Share on other sites

36 minutes ago, Komdotkom said:

Looks tops, nice to see a picture that isn't straight form Artec. I'll be interested to hear how you go with that front stud, looks like a bastard.

Mine is en route from Brisvegas to Melbourne now, but reverse rotation G30 turbos are out of stock. FFS.

Bloody Black Friday sales got me, haha. In stock and cheap...ish

Link to comment
https://www.sau.com.au/forums/topic/484276-artec-manifolds/#findComment-7973593
Share on other sites

17 hours ago, mr_rbman said:

very sexy...

will never understand why guys use those mesh flexi joints, bad news...

Yeah i agree, have seen plenty leak but admittely a while ago. They've got the proper baffled one on the wastegate pipe so not sure why they wouldn't use baffled version for both...?

Link to comment
https://www.sau.com.au/forums/topic/484276-artec-manifolds/#findComment-7973745
Share on other sites

2 hours ago, Shoota_77 said:

Yeah i agree, have seen plenty leak but admittely a while ago. They've got the proper baffled one on the wastegate pipe so not sure why they wouldn't use baffled version for both...?

can only assume stock issues but if selling at a premium should only use premium parts....... just my 2c anyway

Link to comment
https://www.sau.com.au/forums/topic/484276-artec-manifolds/#findComment-7973748
Share on other sites

32 minutes ago, Komdotkom said:

Speaking of stock issues, no reverse rotation housings available until March at the earliest for the G30's. I blame Artec, everybody got on board and now I can't get a turbo.

Talk about first world problems.

i was gobsmacked when i bought all my gear on the black Friday sales that everything was actually in stock...

Link to comment
https://www.sau.com.au/forums/topic/484276-artec-manifolds/#findComment-7973768
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That is surely the biggest gathering of Stageas in North America, ever!
    • Remember kids - if you can't afford to buy 2 GTRs......
    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...