Jump to content
SAU Community

Recommended Posts

Hallo,

Yes I have a stupid RB that spits power steering belts when I smash the limiter at 8600rpm, clearly at a RPM Nissan engineers never envisaged a pleb spec RB25 would reach. RB26 motors don't seem to spit belts as often as they run a 4 rib belt, where as a R33 RB25 uses a 3 rib (I moved all my R33 ancillaries onto the R34 RB25 NEO motor).

I know there are options such as deleting the power steering setup altogether or running one of those FPG power steering replacement kits (very sexual) but I'm not keen on either option - mainly due to effort required & cost.

I can't recall when Ross released their power steering idler kit - however it might just be the solution I'm after. It essentially just adds an idler on the power steering bent to stop the silly deflection at high RPM. In theory it seems to make sense and "should" stop power steering belts spitting off when I smash the limiter OR just rev out the car at high RPM.

I'm more so keen on:

  • thoughts, if this will actually solve my problem or just a pretty looking engine ornament (stares virtually at @GTSBoy)
  • actual installs of it, I can't seem to find any installed photos of it on the web
  • Is it actually worth the $370 or so

Nissan RB Power Steering Idler Kit – performanceheaven

Nissan RB Power Steering Idler Assembly | Ross Performance

 

Thanks everyone!

(Yeah finding new ways to waste money, I've turned into @The Bogan)

 

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/484333-ross-power-steering-idler-kit/
Share on other sites

5 minutes ago, Dose Pipe Sutututu said:

It doesn't seem to be a popular item, hence I was curious on feedback

Guess I'll order it soon, hopefully have it sorted before All Jap Day in May.

I guess it's one of those things that doesn't happen to everyone but it isn't unheard of either.

Never personally had a problem with any of the 26s doing it but if it ever happens it'll be the first thing I'd fit.

  • Like 1
6 minutes ago, BK said:

Never personally had a problem with any of the 26s

You have a lower chance of the belt exiting off the pump as it's a 4 rib, for whatever reason Nissan decided to go to a 3 rib on the R33 GTS-t, but then back to the 4 rib on the R34 GT-t.

Maybe then decided to use a 3 rib pump to pay homage to R-3-3 LOL...

  • 4 weeks later...

Let's see if it actually does anything!

Another option is to just decrease my limiter but that also means I would need to grab 5th gear down the straight, not too keen on that.

I like to kiss the limiter in 4th and be ready to coast then ease on the brakes.

 

PXL_20230202_013652329.jpg

  • Like 1

Installed, haven't started or run the car yet.

Will do so once I've dropped/changed the oil, spanner/bolt check on everything on it.

Ignore the oil mist, it was from the last event when I ran the car without a seal on the oil cap. I thought the cap was a bit loose, but never really clicked.

The kit looks/feels quite good too, just fitting it with the factory fan & shroud in place was a bit fun. I dabbed a bit of loctite on everything too.

 

PXL_20230207_032447467.jpg

PXL_20230207_032430409.jpg

PXL_20230207_032420956.jpg

  • Like 4
31 minutes ago, GTSBoy said:

Just do a long smoky burnout on the street. Cheaper and easier than breaking it at track and just as good for testing the idler and the gearbox.

Bonus, if you get it confiscated, then you can stop bitching about it.

soz to break it to you, I'm not a roll racer or drag racer. 

I really need to find a new hobby that doesn't involve this car and spending money.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
    • You think its the AFM? I know its a common issues on R32s. I find it coincidental how this issue raised right after cleaning the fuel system. As everything except the fuel system was fine before. I tried running it with the IACV unplugged but did not notice a difference and still stalled. However, the RPM gauge is not in the cluster right now, so I will need to connect the laptop again and use Nistune to check the RPM. I will check this weekend.
×
×
  • Create New...