Jump to content
SAU Community

Recommended Posts

Hallo,

Yes I have a stupid RB that spits power steering belts when I smash the limiter at 8600rpm, clearly at a RPM Nissan engineers never envisaged a pleb spec RB25 would reach. RB26 motors don't seem to spit belts as often as they run a 4 rib belt, where as a R33 RB25 uses a 3 rib (I moved all my R33 ancillaries onto the R34 RB25 NEO motor).

I know there are options such as deleting the power steering setup altogether or running one of those FPG power steering replacement kits (very sexual) but I'm not keen on either option - mainly due to effort required & cost.

I can't recall when Ross released their power steering idler kit - however it might just be the solution I'm after. It essentially just adds an idler on the power steering bent to stop the silly deflection at high RPM. In theory it seems to make sense and "should" stop power steering belts spitting off when I smash the limiter OR just rev out the car at high RPM.

I'm more so keen on:

  • thoughts, if this will actually solve my problem or just a pretty looking engine ornament (stares virtually at @GTSBoy)
  • actual installs of it, I can't seem to find any installed photos of it on the web
  • Is it actually worth the $370 or so

Nissan RB Power Steering Idler Kit – performanceheaven

Nissan RB Power Steering Idler Assembly | Ross Performance

 

Thanks everyone!

(Yeah finding new ways to waste money, I've turned into @The Bogan)

 

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/484333-ross-power-steering-idler-kit/
Share on other sites

5 minutes ago, Dose Pipe Sutututu said:

It doesn't seem to be a popular item, hence I was curious on feedback

Guess I'll order it soon, hopefully have it sorted before All Jap Day in May.

I guess it's one of those things that doesn't happen to everyone but it isn't unheard of either.

Never personally had a problem with any of the 26s doing it but if it ever happens it'll be the first thing I'd fit.

  • Like 1
6 minutes ago, BK said:

Never personally had a problem with any of the 26s

You have a lower chance of the belt exiting off the pump as it's a 4 rib, for whatever reason Nissan decided to go to a 3 rib on the R33 GTS-t, but then back to the 4 rib on the R34 GT-t.

Maybe then decided to use a 3 rib pump to pay homage to R-3-3 LOL...

  • 4 weeks later...

Let's see if it actually does anything!

Another option is to just decrease my limiter but that also means I would need to grab 5th gear down the straight, not too keen on that.

I like to kiss the limiter in 4th and be ready to coast then ease on the brakes.

 

PXL_20230202_013652329.jpg

  • Like 1

Installed, haven't started or run the car yet.

Will do so once I've dropped/changed the oil, spanner/bolt check on everything on it.

Ignore the oil mist, it was from the last event when I ran the car without a seal on the oil cap. I thought the cap was a bit loose, but never really clicked.

The kit looks/feels quite good too, just fitting it with the factory fan & shroud in place was a bit fun. I dabbed a bit of loctite on everything too.

 

PXL_20230207_032447467.jpg

PXL_20230207_032430409.jpg

PXL_20230207_032420956.jpg

  • Like 4
31 minutes ago, GTSBoy said:

Just do a long smoky burnout on the street. Cheaper and easier than breaking it at track and just as good for testing the idler and the gearbox.

Bonus, if you get it confiscated, then you can stop bitching about it.

soz to break it to you, I'm not a roll racer or drag racer. 

I really need to find a new hobby that doesn't involve this car and spending money.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...