Jump to content
SAU Community

Recommended Posts

More or less decided that I need to have an R32 in my life. In the process of finding and importing yet another R32... but in the meantime I figured it'd be good to take stock of all the R32 and Skyline stuff i've got littered around my house and my parents garage from when I first started playing with 32's back in 2001.

First visit to my folk's garage saw me find these nuggets:

IMG_0599Large.thumb.jpeg.16b12de1a8e0fa59b28464f67a75ddd0.jpeg
Do-luck floor brace, spare R32 dash that I was going to reupholster at some point

IMG_0600Large.thumb.jpeg.e217ded7dcaa0e97106319efba0efe71.jpeg

tucked in behind it a couple of R32 GTR front quarter panels from a previous GTR and a JUN fibreglass front bumper

IMG_0603Large.thumb.jpeg.47cea223a079996de50f912910562a61.jpeg

couple of pov spec headlights and there's a box somewhere next to it that would have the N1 GTR brackets to turn them into the elusive "N1 headlights"

IMG_0602Large.thumb.jpeg.e85770b88829c6afd5d3fb1bd0e1b4e1.jpeg

factory light up LCD panel (yup - not LED... LCD), fibreglass knockoff Nismo bonnet lip and JUN grille

  • Like 3
  • Haha 1
Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/
Share on other sites

On 29/4/2023 at 1:25 PM, MBS206 said:

This thread feels like a very slow way to claim to be a millionaire these days :P

 

What sort of R32 are you in the process of importing?

Lol at the rates these parts are selling for I might have a million sitting in storage.

looking specifically for an R32 GTS-4. The poor man’s GTR. I kinda have a soft spot for them and I don’t feel bad modding them. Plus they’re about 1/4th the price of a GTR of the same vintage and kms, but go 80% as fast. There’s heaps of aftermarket GTR bits that bolt on including drop in engine swaps if I decide to go for big power.

Altho Andrew probably won’t let me into GTR Festival with one lol

  • Like 1
  • Haha 1
Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978864
Share on other sites

On 02/05/2023 at 3:20 PM, GTSBoy said:

Does it have the lid also? The lid on these is shorter than the lid on the normal lower armrest.

Good point. From memory 10 years ago I took it apart to repair the loop on the second cup slot, now it's somewhere in the shelving, gotta hunt for it! :D

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978910
Share on other sites

They're miserable things at this age. The top hinge on mine broke and I made a replacement that then broke a few years later and I haven't gotten back to fix it again. And the vinyl on top is cracked like the elbow point on the armrests does and now I have to open a vein and talk to a motor trimmer!

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978913
Share on other sites

On 02/05/2023 at 4:24 PM, GTSBoy said:

They're miserable things at this age. The top hinge on mine broke and I made a replacement that then broke a few years later and I haven't gotten back to fix it again. And the vinyl on top is cracked like the elbow point on the armrests does and now I have to open a vein and talk to a motor trimmer!

I'm hopeful things are better this time a decade later cos I now have a 3d printer and can make my own fiddly parts including changing up the material so it isn't as weak or brittle.

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978916
Share on other sites

If you could print me a hinge (that would work, which might be hard for a printed part) I'd happily send you beer. I made mine by using some mystery plastic sheet (nylon or something) about 2mm thick and partially scoring it to fold it to make the hinge. Worked, but was always on a limited future.

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978917
Share on other sites

1 hour ago, GTSBoy said:

If you could print me a hinge (that would work, which might be hard for a printed part) I'd happily send you beer. I made mine by using some mystery plastic sheet (nylon or something) about 2mm thick and partially scoring it to fold it to make the hinge. Worked, but was always on a limited future.

You should see the compliant mechanisms / moving parts the mechanical engineers are printing these days!

Not to mention, you could just print it as a real hinge with a pin in it...

 

Also, Donut Media did an interesting video on repairing an S model Nissan dash, one of the ways they did it was using flocking. Could work for the centre console and be cheaper than a trimmer if cost is a factor...

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978921
Share on other sites

On 2/5/2023 at 7:07 PM, MBS206 said:

Also, Donut Media did an interesting video on repairing an S model Nissan dash, one of the ways they did it was using flocking. Could work for the centre console and be cheaper than a trimmer if cost is a factor...

Not a fan of flocking personally, done it before on race only cars but I’m going for a M Spec vibe for the interior of the 32 eventually.

First step is to acquire car and enjoy driving it. Funnily enough my wife has never known me to own a Skyline - she’s only heard my tales of yearning. She’s only ever known me to own Euros so I kinda want to introduce her to that part of my life.

My old man used to run around in a turbo Ceffy about 10 years ago, and he just passed away last year… so there’s a sentimental connection with an RB there too.

Currently negotiating on a car that has an immaculate dash with no bubble… so we’ll see how that pans out.

  • Like 3
Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978923
Share on other sites

On 2/5/2023 at 6:03 PM, GTSBoy said:

If you could print me a hinge (that would work, which might be hard for a printed part) I'd happily send you beer. I made mine by using some mystery plastic sheet (nylon or something) about 2mm thick and partially scoring it to fold it to make the hinge. Worked, but was always on a limited future.

Happily. Did you want the top hinge or the bottom hinge

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978924
Share on other sites

3 hours ago, funkymonkey said:

Not a fan of flocking personally

4 hours ago, MBS206 said:

Could work for the centre console

I think Matt was talking to me.

It's not that money is an issue. It's just that once you pick off one scab, you have to pick them all off, and you end up doing the door trims, and then something else (say, the dash, even though it is almost perfect it is 30 years old and does not look new any more) starts to look scaly and down the rabbit hole we go.

Plus, flocking is not a hard wearing surface, so it's not gunna last long on an armrest. Needs to be leather/pleather. I have alcantara(ish) seats now, so I need to step my game up if I'm going to trim anything.

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978930
Share on other sites

18 hours ago, GTSBoy said:

I think Matt was talking to me.

It's not that money is an issue. It's just that once you pick off one scab, you have to pick them all off, and you end up doing the door trims, and then something else (say, the dash, even though it is almost perfect it is 30 years old and does not look new any more) starts to look scaly and down the rabbit hole we go.

Plus, flocking is not a hard wearing surface, so it's not gunna last long on an armrest. Needs to be leather/pleather. I have alcantara(ish) seats now, so I need to step my game up if I'm going to trim anything.

Materials Eng really isn't my strong suit (control, and software is), but, if you knew of a suitable low melting point material (I'll check specs later, but believe it is sub 400c we'd need) that can be easily be bought as raw pellets, and someone feels like 3D scanning and drawing up a 3D model of said smaller part (console lid etc), I do have a plastic injection machine at my disposal, just need the 3D model of said part so I can get suitable mould tested...

Could do a hard plastic for main part of lid, and then a softer material as a second injection onto it...

 

Not sure if such a material exists that can be injection moulded that way, there has to be some way that the big manufacturers are automating those items for production...

Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978949
Share on other sites

On 3/5/2023 at 6:26 PM, The Bogan said:

How is the potential rust?

Little rust on the battery tray. Other than that it’s clean. From a non snowy region so I’m a bit reassured

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/484636-r32-nostalgia/#findComment-7978953
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...