Jump to content
SAU Community

Recommended Posts

I've noticed that R32 gtst's seem to have come with either amber or clear side indicators. Which was the latest revision? I'm looking at buying a rh side replacement and I want to confirm the one availalbe from nissan (26124-01U00) is the amber as that's what I already have and prefer. Thanks. 

Nah. Most GTSt are amber. Typical examples

My R32 GTS-T daily driver. RB20, big turbo, big power, but small budget. |  Driftworks Forum

1992 Nissan R32 Skyline GT-R - Reader Ride

You do see some with the clears. I've never really bothered to work out why they exist. It might be that it's the early GTSts (like '89-90) that had clears. The various adverts for genuine clear indicators say that they only fit GTSt guards, not GTR.

Nissan Skyline R32 GTST -1989 – SKAR

1990 Nissan Skyline GTS-T | Driver Motorsports

 

Nearly 20 years ago this was something of  a hot topic!

 

I'd love to know the actual timeframe and models they came on. My 1990 gtst has full amber indicators. Happy to hear most were amber. If that's the case, I'll go ahead and order one and report back. 

Looked into it more, and it seems the 89-9.91 gtst was part# 2612401U00 and 9.91+ was part# 2612408U00. I'm presuming one of those is the full amber vs clear/side amber. 

My 1990 as already mentioned is full amber but I'll go see if there's a part# on the indicator. 

On 8/4/2023 at 11:27 AM, TurboTapin said:

I'd love to know the actual timeframe and models they came on. My 1990 gtst has full amber indicators. Happy to hear most were amber. If that's the case, I'll go ahead and order one and report back. 

where are you ordering brand new GTST indicators from? they are discontinued aren't they? 

23 hours ago, DaymoR32 said:

where are you ordering brand new GTST indicators from? they are discontinued aren't they? 

They are or where but they popped up on Amayama again as available. I regretted not getting one two years ago and didn't want to miss my opportunity now in case it's a fluke. I ordered the later model one. I'll let you know if it's the full amber one, once it arrives. 

1 hour ago, TurboTapin said:

They are or where but they popped up on Amayama again as available. I regretted not getting one two years ago and didn't want to miss my opportunity now in case it's a fluke. I ordered the later model one. I'll let you know if it's the full amber one, once it arrives. 

nice, look forward to the update

Series 1 R32's had clear indicators. Series 2 had amber indicators.

Keep in mind R32 GTRs were designed and released almost a year after the S1 was released, and they came out with amber indicators as they were moulded from a single piece of plastic (to save weight - because racecar). The original plan was to have clear indicators with a tiny bubble in amber for road regulation compliance. Once the GTR look became popular, they made the clear bit amber too in the S2 - albeit still made from 2 pieces of plastic.

A very very common mod was to change the S1 indicators to update the look. Also didn't help that S1 indicators very frequently cracked around the bulb fitting and you ended up with condensation inside.

 

The designers went back to the original intent of all clear headlights in the R33.

  • Like 1
17 hours ago, funkymonkey said:

Series 1 R32's had clear indicators. Series 2 had amber indicators.

Keep in mind R32 GTRs were designed and released almost a year after the S1 was released, and they came out with amber indicators as they were moulded from a single piece of plastic (to save weight - because racecar). The original plan was to have clear indicators with a tiny bubble in amber for road regulation compliance. Once the GTR look became popular, they made the clear bit amber too in the S2 - albeit still made from 2 pieces of plastic.

A very very common mod was to change the S1 indicators to update the look. Also didn't help that S1 indicators very frequently cracked around the bulb fitting and you ended up with condensation inside.

 

The designers went back to the original intent of all clear headlights in the R33.

Yes that's also my understanding. My S1 had amber indicators but I'm presuming they were swapped out at some point. I went ahead and ordered the S2 indicators. 

On 8/7/2023 at 10:59 PM, DaymoR32 said:

nice, look forward to the update

Amayama just informed me that they're still discontinued. No idea what happened with their system but I remember them going from available to discontinued roughly 2 years ago.

Strange that it reset itself to available again, but it was clearly an error. Aw well, it is what it is. Cheers. 

 

 

  • Sad 1

Just Jap stock an aftermarket replacement

https://justjap.com/products/mbro-japan-smoked-front-corner-indicators-nissan-skyline-r32-gts-gts-t

I guess you'll need to replace both to match but they are cheaper than 1 from Nissan (if they did exist)

Holy sheet.

https://www.jdmgarage.com.au/shop/exterior/lights-and-indicators/indicators/genuine-r32-gtst-drivers-side-indicator/

$200 for a broken one!

pretty sure I’ve got a couple of sets in my garage. Better wrap them in bubble wrap instead of being tossed into a box of random stuff.

On 8/10/2023 at 8:29 PM, funkymonkey said:

Holy sheet.

https://www.jdmgarage.com.au/shop/exterior/lights-and-indicators/indicators/genuine-r32-gtst-drivers-side-indicator/

$200 for a broken one!

pretty sure I’ve got a couple of sets in my garage. Better wrap them in bubble wrap instead of being tossed into a box of random stuff.

yep, they go for silly money now

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • The roof is wrapped
×
×
  • Create New...