Jump to content
SAU Community

Recommended Posts

Hi all,

Newbie here. Just picked up my Stagea RS260 last week. I'm low on the learning curve, but working on it, so please bear with me.

I'm trying to get an idea of the type of kilometers you R33 drivers get out of a tank. I'm in the States, so I'm doing a lot of conversions over here. From what I've read, I have an 80 liter tank. That equates to about 21 US gallons. When the trip meter reads about 400 kms, the low fuel light will come on. It takes a little over 16 US gallons or ~65 liters to fill the tank at that point. If I'm doing the math right, I'd expect that I could get about 500-520 kms out of a tank. I know that there are a lot of variables here (e.g. turbos, driving habits, tire size, etc.), but what do you all see out of a tank of gas? What do you all see from a kpl or mpg perspective? Thanks in advance.

-Kip

Link to comment
https://www.sau.com.au/forums/topic/485109-how-many-kilometers-to-a-tank/
Share on other sites

Practical max capacity of the tank is about 65l, not 80l. Workshop manual says it is 72l but I've never got more than about 65 in.  Manual also says lamp comes on at 13l remaining

Stageas are pretty thirsty between their weight and old school turbo engine. I get about 13l/100 (noting mine is pretty modified including cams) on mostly highway driving, which is about line ball with our 5.6l Titan.

BTW, thanks for converting to metric to give our brains a chance

Hah, the best I've seen in my wagon and RB25 is 11.3l/100km or 20.8mpg and that was pretty much highway only. In the city it's around 17l/100km or 13.8mpg.

What I find interesting and didn't expect is that having fun and boosting it doesn't make much of a difference to the fuel consumption. Like doing a run through the twisties and it stays pretty much at highway levels. It's the start and stop city driving that kills it. Of course my driving is 90% city. Would rather be delivering tofu in the mountains but oh well.

  • Like 1

I have an R32 with RB25Neo....so much lighter car and somewhat more "fuel efficient" engine than the Stag/26 combo. I drive for economy most of the time, but will usually use whatever opportunities exist for a squirt. The best consumption I get is a flat 10. I have records of every tankful of fuel that I have used in the last 25 years. 10 is as good as it gets unless doing a long trip at <100 km/h.

The difference between 10s and 12s is a lot of km!

When my R33 GTST last ran, the best fuel economy it managed was 25L/100km...

Then again, lower RPMs weren't completely tuned, so could have got a LOT of economy back...

 

When it had the stock motor in it, going from memory it ran around the 13-14L/100km economy mixture of around town, and highway.

 

I rarely managed to drive more than half a tank with my brain in economy mode though. Economy mode in my brain was just a constant fight, and boost always won in the end :P

Thanks all. This is very helpful.

I'm pretty sure I have an old school tune on this thing that is dumping too much fuel into the mix. Between the soot I'm collecting on the rear bumper cover and the 13L/100km at freeway speeds (130-140 kph), this thing is too rich. I'm going to get this car off the ground this week and set out on a fact finding mission. Hoping I can start to understand the list of mods to start determining my next steps.

I did misrepresent a little though. The low fuel lamp comes on around 475 kms. That's about when it takes ~65 liters to top off. Also, totally screwed up my model designation. It's a 260RS, not RS260. Newbie fail!

-Kip

19 hours ago, Duncan said:

BTW, thanks for converting to metric to give our brains a chance

Hahaha. Totally appreciate that. It took me a good 15 mins to write all that up, what with checking conversion rates and plugging in the math. No promises I didn't totally bottle it(?).

3 hours ago, Kip said:

...I'm pretty sure I have an old school tune on this thing ...

Well, a place to start is the output of both o2 sensors. You will need to know which ECU you have, if stock you need a consult cable or otherwise whatever suits your ECU.  Depending if the ECU runs narrowband or wideband o2 sensors, check the output of the o2 sensors is as expected, if they are factory narrowband sensors it is reasonable to need replacement after 25+ years

However.....my bet is you won't find much wrong and won't make much difference; they are just thirsty

21 hours ago, GTSBoy said:

I have an R32 with RB25Neo....so much lighter car and somewhat more "fuel efficient" engine than the Stag/26 combo. I drive for economy most of the time, but will usually use whatever opportunities exist for a squirt. The best consumption I get is a flat 10. I have records of every tankful of fuel that I have used in the last 25 years. 10 is as good as it gets unless doing a long trip at <100 km/h.

The difference between 10s and 12s is a lot of km!

yeah i average about 10L/100 in my neo swapped 32 too at highway speeds, thats with the odd squirt aswell.

when driving around town and a lot of short trips it creeps up a fair bit though 😆

My shit box does about 12 to 13L/100km on 98RON with the AC on (can't drive with the windows down, catch can stinks 😭).

On E85 that goes to about 22L to 25L/100km.

On the track, I use about 20L every 5 to 6 laps (3.94km long), works about ~74L/100km lol..

 

 

  • Haha 2

Wakefield Park days were brutal, drive up with 5x jerry cans (over filled at 22L each) with 98RON in the tank.

First session drive off the 98RON, reacquaint myself then literally 5x sessions, 5x jerry cans. After that, stop by the BP in town to fill up on 98RON and run whatever mix and drive home.

Here's a business ideal, open up a petrol station near by with E85 once One Raceway opens up. Looks like with the new facilities, there will be good traffic.

17 hours ago, Duncan said:

Well, a place to start is the output of both o2 sensors. You will need to know which ECU you have, if stock you need a consult cable or otherwise whatever suits your ECU.  Depending if the ECU runs narrowband or wideband o2 sensors, check the output of the o2 sensors is as expected, if they are factory narrowband sensors it is reasonable to need replacement after 25+ years

However.....my bet is you won't find much wrong and won't make much difference; they are just thirsty

Good plan. I usually change out O2 sensors on new-to-me cars. I see them as wear items that most people don't deal with. But yeah, I was prepared for a thirsty car. It's a porker and has the aerodynamics of a brick.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...