Jump to content
SAU Community

Recommended Posts

Hey Team,

 

Have my car booked in for a tune next month, just wondering what HP everyone would expect ill make..

 

Engine is S2 RB25DET good compression, only mods are:

-Yellow jacket coils

-S15 Spec R injectors 440cc?

-Tomei adjustable fuel reg

-Walbro 350 L/HR Fuel pump (Hard wired)

-Complete 3" straight pipe exhaust, no mufflers

-Cold air intake 

-FMIC

-Apexi power FC 

Everything else is standard, im hoping for around 200-220kw is this a reasonable goal?

Link to comment
https://www.sau.com.au/forums/topic/485393-what-power-can-i-expect/
Share on other sites

To carry on from Duncan's valuable observation....

Standard turbo will not likely exceed 200rwkW at the maximum sensible boost pressure, which is only ~12 psi on these turbos.

The yellow coils have a better than even chance of pissing you off as soon as the boost exceeds 10 psi. These are not a good choice. You'd be well advised to f**k them off before you go to the dyno so you don't waste their time.

  • Like 1
1 hour ago, GTSBoy said:

To carry on from Duncan's valuable observation....

Standard turbo will not likely exceed 200rwkW at the maximum sensible boost pressure, which is only ~12 psi on these turbos.

The yellow coils have a better than even chance of pissing you off as soon as the boost exceeds 10 psi. These are not a good choice. You'd be well advised to f**k them off before you go to the dyno so you don't waste their time.

Sorry forgot to add it has a Apexi boost controller, tuner said will likely set it around 10psi

1 hour ago, GTSBoy said:

To carry on from Duncan's valuable observation....

Standard turbo will not likely exceed 200rwkW at the maximum sensible boost pressure, which is only ~12 psi on these turbos.

The yellow coils have a better than even chance of pissing you off as soon as the boost exceeds 10 psi. These are not a good choice. You'd be well advised to f**k them off before you go to the dyno so you don't waste their time.

Tuner said hes had good results with yellow jackets, engine come with some sh1ty ebay coils so just happy there gone

Is there a problem with the RB ones? as my S14 has been running Yellow jackets for going on 8 years now @14psi and never missed a beat  

9 minutes ago, SNL said:

tuner said will likely set it around 10psi

In that case, ~190 rwkW, at best. Probably less, because not Neo.

6 minutes ago, SNL said:

Tuner said hes had good results with yellow jackets

Well, if he's willing to risk his/your time on the dyno, then who am I to complain?

7 minutes ago, SNL said:

engine come with some sh1ty ebay coils

There is no difference between yellow jackets and "shitty ebay coils". Same same.

7 minutes ago, SNL said:

my S14 has been running Yellow jackets for going on 8 years now @14psi and never missed a beat

That is a very rare result.

As gtsboy already stated. The yellow jackets may cause you issues. Probably be ok at that power and boost level if spark plugs are gapped down to 0.6mm but still a risk and could potentially mean tuning doesn't get completed on first attempt, costing you more $. I'd replace them.

I'd estimate around 190rwkw with your listed mods.

To get more power reliably, you'll need at least a high flow turbo, will get you up to (250-260kw safely) but you'll  possibly need to upgrade your AFM and injectors. S15 injectors are good for around 230-240rwkw. Could just run enough boost to keep them happy.

Before you know it, you're running E85, big turbo, twin gates, blah blah 500rwkw 40k later. Yep do that lol 😂

 

4 hours ago, SNL said:

Tuner said hes had good results with yellow jackets, engine come with some sh1ty ebay coils so just happy there gone

Is there a problem with the RB ones? as my S14 has been running Yellow jackets for going on 8 years now @14psi and never missed a beat  

fun fact first there was nissan coils then splitfire, then yellow jacket sent the drawings to china and then came the copies everything after splitfire is ebay. I wouldn't think its needs a tune, but if you want to see what it does and clean it up a guess 180-190rwkw, a z32 maf would be wise to use with your power fc and make a full 80mm intake 14 psi should get close to 200-220rwkw. 

1 hour ago, morboost said:

fun fact first there was nissan coils then splitfire, then yellow jacket sent the drawings to china and then came the copies everything after splitfire is ebay. I wouldn't think its needs a tune, but if you want to see what it does and clean it up a guess 180-190rwkw, a z32 maf would be wise to use with your power fc and make a full 80mm intake 14 psi should get close to 200-220rwkw. 

A tune is always a good idea. Especially when changing injectors and pumps.

with a stock turbo he won’t make that much 

Sorry seems ive missed a bunch of stuff lol, it is currently running a Z32 AFM which came with the Power FC.

Pulsar turbo and R35 Coil swap was definitely on the list of things to sort in the near future, but for now i just want to get some seat time as i was just running the DE before which done me well at a few drift days learning the ropes, this set up will be plenty for a few more events and im sure like anything will no doubt snow ball into a nasty build   

2 hours ago, GTSBoy said:

To be fair, you can make over 200 rwkW. It's just a question of whether it is until tomorrow or the day after.

Back in the day there was a few of us with 180-200kw R33 GTSTs being very reliable for road and track day use for years.....but then 400 became the new 200 and 600 became the new 400 and everyone has expensive, broken projects.

There is nothing wrong with a lightly modified standard setup for years of reliable fun

11 hours ago, Duncan said:

understood....I was running 12 psi on the standard turbo for 180kw....standard intercooler, intake, ECU etc just an exhaust.

Oh, and some nice big sticky tyres

that's how I did it 14psi and rich jap chip few clicks of the cas till it didn't ping exhaust intercooler intake, no dyno the open road was testing, b road bruiser -  r33 gtst are great GT cars, refer nissan add

https://www.youtube.com/watch?v=YyYMr_ATNJ8

  • 4 weeks later...
7 minutes ago, SNL said:

VCT no really working properly

Would only affect the low end, not the outright power produced.

Also 180kW is about right for a stock turbo, you could push a bit more boost and make 190~200kW then hours later (maybe minutes) be ready to buy a new turbo lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...