Jump to content
SAU Community

Recommended Posts

I'm replacing the front tyres on the E39 tomorrow because one of them has a few gouges out of it. There is so much tread still on them but they're also 9 years old and the rubber is super hard. 

This falls within the guidelines of 10 years old that I've read which surprises me given their condition. 

I'm curious about whether you guys care about tyre age or just judge the tyre based on condition? How old would you consider too old?

Link to comment
https://www.sau.com.au/forums/topic/486127-how-old-is-too-old-for-tyres/
Share on other sites

Personally I wouldn't put tyres over 4 or 5 years old on any of my own cars. Once they go hard the grip characteristics completely change. As per most things it only matters in an accident and that's when you most want them to do their job!

  • Like 2

Yeah - 4 or 5 years is the limit for decent tyres.

Pedestrian grade tyres with 400 TW ratings start out hard and don't start to suffer until they are somewhat older again. But the stickier decent stuff? Nup. My current ADO9s are < 2 yrs old, 17000km in, only have about the minimum 2mm of tread depth left, and they are.....not what they used to be. They are clearly much harder now than when new. Whether that is heat cycles (unlikely, for a road tyre), different compound between top and bottom of tread, or actually aging out (in less than 2 years!!!) is not really able to be discerned. But I'd credit actual aging as being at least part of the cause.

I've got an old pair of ~50% worn AD08Rs in the shed that I really need to get rid of. They started feeling waaaay too hard to put back on the car after a couple of years sitting there.

  • Like 1

Also, a tip for young players 

Check the dates on new tyres before they fit them, I always ask this question at the tyre shop, as they have tried to put "new" tyres on one of my cars a few years ago, but the build date was about 3 years old

  • Like 1

If the tyres were fitted when new, I wouldn't expect much over 5 years of use. Especially if the car lives outside full time. 

If the tyres had been stored under ideal conditions and are being purchased new, I'd fit a set of already 5 year old tyres if I only expected to get 1 to 2 years of use out of them. 

I've purchased many a set of new (but quite old) tyres from St George Tyres when I just needed some decent rear tyres to drift on. 

Here is a pretty crazy example, can't say I've ever bought 11 year old tyres from them before though lol. 

https://www.stgeorgetyres.com.au/momo-tyres-245-45-17-outrun-m3-official-product-by-momo-italy.html

  • Haha 2
21 hours ago, PranK said:

I'm replacing the front tyres on the E39 tomorrow because one of them has a few gouges out of it. There is so much tread still on them but they're also 9 years old and the rubber is super hard. 

This falls within the guidelines of 10 years old that I've read which surprises me given their condition. 

I'm curious about whether you guys care about tyre age or just judge the tyre based on condition? How old would you consider too old?

10 years is really pushing it. At 7-8 years you need to inspect frequently for signs of dry rot.

1 hour ago, joshuaho96 said:

10 years is really pushing it. At 7-8 years you need to inspect frequently for signs of dry rot.

I've got 15 year old tyres on a car in my garage, holding air (holding it better than the daily driver does!) and no signs of rotting/cracking/drying out. Oh, and they've only been garaged the last 3. Before that they sat in a couple of different paddocks/yards, and even spent about a week underwater too.

However, weather and other environmental factors can really change how quickly they start to dry out and crack.

My understanding is that UV tends to accelerate the aging process. If the car has been garaged, then you could probably get away with extending beyond 10 years.

FWIW, in 2015, I had tyres on my 180B SSS that had a 3-digit code (2 for week, 1 for decade), ending in 0, so could have been more than 30 years old, but still worked fine. I did replaced them very quickly, though, once I discovered what the code meant!

Ok got some old tyres for you guys...my car has been sitting around un-driven for about 6 years now.

I had it on the original rims with the shitty compliance tyres it got it with back in 2006, which were manufactured in 2004...

Sidewalls eventually rotted and split open, obviously no air in them and the rims were holding the car up.

Just swapped them with some 17" Work rims and tyres which are probably 10+ years old too but at least holding air

IMG_20250222_165543.jpg

IMG_20250222_165617.jpg

IMG_20250222_174409~2.jpg

  • Like 1
  • Haha 1
1 hour ago, Ozdavroz said:

Ok got some old tyres for you guys...my car has been sitting around un-driven for about 6 years now.

I had it on the original rims with the shitty compliance tyres it got it with back in 2006, which were manufactured in 2004...

Sidewalls eventually rotted and split open, obviously no air in them and the rims were holding the car up.

Just swapped them with some 17" Work rims and tyres which are probably 10+ years old too but at least holding air

IMG_20250222_165543.jpg

IMG_20250222_165617.jpg

IMG_20250222_174409~2.jpg

I am now intrigued to go check the dates on the tyres on my Skyline...

We need a game of who has the oldest tyre still holding a car up, and successfully holding air (for longer than a 2 weeks I feel is successful air holding).

 

I feel your tyres may be beating mine :(

2 hours ago, Ozdavroz said:

Ok got some old tyres for you guys...my car has been sitting around un-driven for about 6 years now.

I had it on the original rims with the shitty compliance tyres it got it with back in 2006, which were manufactured in 2004...

Sidewalls eventually rotted and split open, obviously no air in them and the rims were holding the car up.

Just swapped them with some 17" Work rims and tyres which are probably 10+ years old too but at least holding air

IMG_20250222_165543.jpg

IMG_20250222_165617.jpg

IMG_20250222_174409~2.jpg

Went looking at mine, reading off the tyre, presumably these are 1st week of 2003. Still hold air (I haven't had to pump them up in over 12 months!)

 

PXL_20250222_103140228.thumb.jpg.b69a72861d9be2acef7880f8d53a73c5.jpgPXL_20250222_103349285.thumb.jpg.effffed8b1e7ef751183223cb8c3e392.jpgPXL_20250222_103357847.thumb.jpg.6ae9c122892af223103c9e18656b97c9.jpg

 

I couldn't quickly find the date on the front tyres, they were fitted around 2008 to the rims, so probably not quite as old, but they have a lot more dry rot cracks in them. Still hold air. :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...