Jump to content
SAU Community

Recommended Posts

  • Replies 71
  • Created
  • Last Reply

Top Posters In This Topic

Wtf is a Stagea GTR?

To be precise an Nissan Stagea Autech 260RS

"Introduced to compete with the Subaru Legacy Touring wagon, the Nissan Stagea was launched in 1996 and featured a 2.5-litre inline-six engine. It was good for a claimed output of 276 horsepower, however the real ratings would have been closer to 293. Sending power to all four wheels, that model was good for a 0-60 mph time of 6.4 seconds and a 1/4 mile time of 14.5. Enter Autech and the Stagea 260RS. Using the Skyline GTR engine and driveline, the stated output remained at 276 but in reality that figure was now closer to 310. Besides a small increase in displacement from 2.5 to 2.6 litres, the Stagea Autech also employs a beefier rear anti-roll bar and a strut brace linking the front suspension towers as well as a mechanical limited slip differential for the rear axle and Brembo disc brakes with ABS all around to improve stopping power. The straight line performance, braking and handling is improved dramatically over the base model. If this this is still not enough though, a Nismo tuned version is available whose 0-60 and 1/4 mile times are somewhere in the neighbourhood of 5.1 and 13.6 seconds, respectively."

hehe I've got the origianl jap brochure for your car, I'll scan it for you guys when I get home. It might shed some light on the matter a lil. Also a quick VIN number check will prove the authenticity of that car, coz if its an original Autech 4 door then it'll say so on FAST.

Also just to let you guys know, while I was testing the software I'm writing last night I found a white 4 door R32 GTS4 that had gotten a full GTR conversion, RB26 and drivetrain plus Original JUN 4 Door GTR kit, which was as rare as hen's teeth. Its a 93 model as well. Selling for 2.5 million yen. Will post up pics later.

To be precise an Nissan Stagea Autech 260RS

"Introduced to compete with the Subaru Legacy Touring wagon, the Nissan Stagea was launched in 1996 and featured a 2.5-litre inline-six engine. It was good for a claimed output of 276 horsepower, however the real ratings would have been closer to 293. Sending power to all four wheels, that model was good for a 0-60 mph time of 6.4 seconds and a 1/4 mile time of 14.5. Enter Autech and the Stagea 260RS. Using the Skyline GTR engine and driveline, the stated output remained at 276 but in reality that figure was now closer to 310. Besides a small increase in displacement from 2.5 to 2.6 litres, the Stagea Autech also employs a beefier rear anti-roll bar and a strut brace linking the front suspension towers as well as a mechanical limited slip differential for the rear axle and Brembo disc brakes with ABS all around to improve stopping power. The straight line performance, braking and handling is improved dramatically over the base model. If this this is still not enough though, a Nismo tuned version is available whose 0-60 and 1/4 mile times are somewhere in the neighbourhood of 5.1 and 13.6 seconds, respectively."

Yes, yes, yes... I knew that... just curious as to why you called it a Stagea GTR when it's not.

Yeah it is that style of lights. I was thinking of doing the conversion to the coupe lights but it would involve too much. I would need to change the boot lid and the rear bar but and none of that would be a bolt on job on the curent rear end. So that means it would involve the cut and weld of the whole rear end.

hey funkymonkey, whats with the car above? is that the original look or did someone cut and weld? I got a 4 door and the rear end is totaly different, especially the lights.

It also has flared quarters and door add ons (to match the quarters).

Lots of work. but makes for a cool R32 4 door GTR look a like.

Richard

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...