Jump to content
SAU Community

Recommended Posts

100% stock standard. That's actually standard height for an Axis model. We may have also had a fair load on board. There's also a gold m35 a silver arx and a red c34 in the area too. We have been noticing an increase of m35's around the south east in general. Good luck with yours will probably see you around.

100% stock standard. That's actually standard height for an Axis model. We may have also had a fair load on board. There's also a gold m35 a silver arx and a red c34 in the area too. We have been noticing an increase of m35's around the south east in general. Good luck with yours will probably see you around.

I might have seen your car over the weekend, it was about 12:30am Saturday night on Springvale Road at the Eastern Fwy overpass

Has happened to my old man. He woke 1 morning to go to work. Goes outside, no car in the driveway. Goes back in to get keys for mums car and comes back out, sees a guy driving his car back into driveway. Guy gets out, looks at the old man, says thank you and runs off into the distance. We worked out this guy was regularly taking the car and bringing it back. Many arguments where had about not putting fuel in the tank. Turns out, this bloke was using it all. Lol.

  • 4 weeks later...
  • 3 weeks later...

Spotted my own car the other day, when my old man was taking it to get a pink slip for rego.  Does that count?

It's probably the furthest it's traveled in quite a few months, too.  :(

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...