Jump to content
SAU Community

Recommended Posts

Some guy was taking a photo of the 32 in the carpark.

Its a nice compliment.

Also the auto elec said its unique now and less of a target for thieves. Because its easily recognized.

People say it looks great, then i say its a backyard job, so they step closer and have a look, and say its still good for a backyard job.

(most people are very nice and dont point out the fk ups) :blush::D

Some people appreciate the fact i gave it a go more than how it turned out.

I think thats part of the Aussie psyche; "Have a go mate".

Duncan could you link me to SydneyKids suspension kit you were talking of.

Rosie dont forget about adaptronic theyre cheap for a new standalone ECU. If your going to go for more down the track save your money and pay once. Pile up everything and go for a tune once if its possible.

gtr or gtt? gtt is here: http://www.skylinesaustralia.com/forums/topic/88141-r34-gtt-bilstein-whiteline-suspension/page-15?hl=%2Bsydneykid#entry4203328. I'm sure he can also sort GTR stuff if that's what you need.

Gary is a suspension engineer with specific experience racing skylines. I've got his stuff in my stagea and race gtr and in both cases they are awesome for the price....

  • Like 2

Who is the only guy who does Nistunes in ACT? Might give him a call and see what we can do.

Also, what would be needed for like a smoother/better mid range RPM? Nistune + ? + tune?

Edited by RosieR34

Only choice is Ed at Autotech in hume.

He did mine and got 245rwkw with Nistune

will need a few extra bits (like injectors + Fuel Pump)

Quoted from page 476. ^^^

Who is the only guy who does Nistunes in ACT? Might give him a call and see what we can do.

Also, what would be needed for like a smoother/better mid range RPM? Nistune + ? + tune?

Nistune + TUNE. It's all in the Tune. :whistling:

May need a replacement Fuel Pump too.

Oh, I thought Nistune was the chip thingy that is put on the stock ECU. Might just call him and see what he recommends for a basic 200-210kW. Not sure how much I'm willing to spend. Maybe max of $1,500 since plans have changed :'(

its possible but there will be a lot of shortcuts the install and tune of a Nistune is $1200 as of 14months ago when i did it with Ed. Small things like AFM, dump pipe Defs need a z32 AFM. You could probably do 210 with stock dump. Not sure about injectors but mine couldnt be safely pushed past 194kws at 14psi

Honestly i wouldn't even bother with that budget. Save up till you can afford a hypergear turbo do it properly.

It's either SAFC or Nistune. Don't want to chase power :'(. Well, I do but I cannot justify it. I just want a bit more than what I currently have. Rosie is a stepping stone, don't want to go all out yet.

I'll just give them a buzz tomorrow and see what they can offer and what I can afford.

ty peeps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...