Jump to content
SAU Community

Recommended Posts

Referring to the photo regarding to PFC settings 3. Does any 1 know why my Air Flow settings would have been changed from the default of 100% to 0.0% in all 8 boxes when I was

having every value as 0.0 means correct the load axis to 0

this will make the car run like ass and im surprised it starts

put them all back to 100.0

http://www.paulr33.com/powerfc-emulator/me...t_afm_ramp.html

the value as covered by the pfc hand controller emulator is correction scaling

this influences the final load axis the pfc uses to select IGN/INJ correction off the maps

I have an EL hand controller in my hot little hands.....however both my cars with PFC at at mechanics atm. I am 99% certain it is the same as the old controller, just coloured and ricier.

updated

added confirmation new EL hand controller supported models (all PFC's except for Toyota JZX100 Auto)

awaiting pics from duncan of new EL hand controller

OK, had a chance to have a look. All functions are effectively identical to the normal HC (contrast page is different but has the same purpose).

The firmware is at least a little smarter, my old HC used to come up blank when being used via a PS2 extension cable whereas the EL comes up with "communication error". But all the actual tuning and monitoring functions are the same as the regular HC.

anyway pics are pretty crappy (no interior light in the race car :thanks:)

attached:

serial number

version number screen

start up logo

el contrast control

even so...it is very ricey and I'm not sending it back :down:

post-74-1281783490_thumb.jpg

post-74-1281783513_thumb.jpg

post-74-1281783524_thumb.jpg

post-74-1281783532_thumb.jpg

question...

I have a pfc numbered: pfc rb25 9810-0049

Now i took the car to be tuned,but the tuners software wouldn't recognize the computer,said i would need a hand commander unit for him to tune it.

So i borrowed a mates commander which was off a pfc numbered:ecr33 and what ever numbers i cant remember,which worked fine.

Now im trying to buy my own commander,just brought one numbered: fcc nt9607-0464....BUT it doesn't work,just goes to the apexi screen and stops there,but from everything ive read,this unit should work...???

Could someone please point me in the right direction..

OK, had a chance to have a look. All functions are effectively identical to the normal HC (contrast page is different but has the same purpose).

The firmware is at least a little smarter, my old HC used to come up blank when being used via a PS2 extension cable whereas the EL comes up with "communication error". But all the actual tuning and monitoring functions are the same as the regular HC.

anyway pics are pretty crappy (no interior light in the race car :huh:)

attached:

serial number

version number screen

start up logo

el contrast control

even so...it is very ricey and I'm not sending it back :)

thanks

that looks heaps better

and good to confirm it is in fact FCC4

as this hand controller works on every version of powerfc except toyota Auto which is even bettter

ie ap eng, pro, normal spec and every car

i will add to the PFC FAQ shortly

thanks again

i might get one too, looks a lot better

question...

I have a pfc numbered: pfc rb25 9810-0049

Now i took the car to be tuned,but the tuners software wouldn't recognize the computer,said i would need a hand commander unit for him to tune it.

So i borrowed a mates commander which was off a pfc numbered:ecr33 and what ever numbers i cant remember,which worked fine.

Now im trying to buy my own commander,just brought one numbered: fcc nt9607-0464....BUT it doesn't work,just goes to the apexi screen and stops there,but from everything ive read,this unit should work...???

Could someone please point me in the right direction..

check your serial #

FCC NT should work on PFC RB25 powerfc

A hand controller from ECR33 serial # powerfc should NOT work on RB25 PFC serial # as they are different models

ie

PFC RB25 needs FCC N001 which is FCC NT

PFC ECR33 needs FCC X001 which is FCC2 or FCC3

you can buy the new EL version which will work

tryed the hand controller again,with the same result...

Pulled the cover off my pfc and stick on the chip was: fc rb25-2

So i dont know whats up other than buying the new el model..

very frustrating

if you said you used a mates hand controller and he has PFC ECR33 serial # then yours is labelled wrong

its the only thing that makes sense or its a non-std powerfc or something else is wrong

N001 or FCC NT should work on PFC RB25 XXXXXX

X001 or FCC3 should work on PFC ECR33 XXXXXX

the first two digits of the serial # is the build year

so yours was built in 1998 apparently

Has anyone had this type of problem before?? My 33GTR Powerfc Pro is not linking up with my handcontroller or FC datalogit. My GTR has a normal FC running at the moment so i know the hand controller and datalogit are fine, but the pro wont link up although starts the car and runs, abit rough as its a unknown tune from the prevous owner... When i purchased the pro 3years ago, i hooked it up and everything worked fine, i varified it was the PRO and let it sit ever since... Anyone had a similar issue??

i have a PFC pro have had no such drama's mine was brand new

maybe try a full INIT

Thanks for the reply madaz i cant get into the menu to init it unforuntely its funny it worked fine a few years back now nothing...

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...