Jump to content
SAU Community

Recommended Posts

I need new tyres for my R33 GTS-4 (non-turbo 4wd).

Current tyres are 225/50/16 Sava Intensa, which seem to give adequate traction for my car.

I can get the same ones (Sava) for around $180each?

Cheaper Nankangs for around $120each

Or something like Goodyear Eagle F1s for $210each

They're the 3 I was told about today anyway.

Any suggestions?

Car is just a daily driver obviously and I want something that has decent grip in the wet too. Current tyres aren't too bad in the wet, it will only slide in the rain if you make it (obviously 4wd makes it harder).

I get $10 off a tyre, so F1s would be $800 fitted and balanced, which is probably the most I would want to spend.

I don't really want to get a cheaper tyre than my current Sava's so probably wont get the Nankangs but might consider the F1s if they are good?

Yeah thats definitely them. They cost good money as well.

I'd have to go with Duncan on the SP-9000's. I also found them an excellent road tyre, and would definatly use them again.

You must have got a bad tyre, incorrect suspension setup or tyre pressures to be unhappy with these.

I'd have to go with Duncan on the SP-9000's.  I also found them an excellent road tyre, and would definatly use them again.

You must have got a bad tyre, incorrect suspension setup or tyre pressures to be unhappy with these.

Hi Scotsman, my wheel alignment was done at East Coast Suspension which is supposed to be good. I have since found out though that I was not entirely fair on the sp9000's as I have never really liked the front end of my car and that was due to the front spring rates not being hard enough, the standard (too hard) bump stops and the whiteline swaybars being incorrectly set. I have had the bars fixed and it has made a big difference but it is bottoming out in the front all the time (only lowered 1 inch). Its not really obvious but you can feel it and it makes the car very nervous on imperfect surfaces (read: sydney roads).

I just need to get the custom springs made up and I have a funny feeling my opinion of the 9000's will change.

Hi all,

Just purchased an r34 GTT sedan, currently on bridgestone import tyres and handles great! Unfortunately I need to buy new tyres and am overwhelmed by the options including width, price etc.

Given that most half decent 225,45,17's start at $225+

Could someone provide some feedback on width?

I am running stock rims and unsure if I would get improved ride/handling by running wider rears? eg. 235 fronts and 245 rears?

Thanks...

I currently have Michelen Primacy, which are top of the range Michellen tyres.. Even tho i have bought second hand tyres, the grip on them is just to good.. They really stick onto the road.. even tho with 50% thread left, im really happy..

Got the primacy on z32 rims, with 215s/55/16s..

Worth checking out the primacy range.. But $$$$..

im digging into my pocket again for two tyre's

i bought some wide ovals for the front and i am happy with them but i cant get over the feel of my car with toyo tpg's on it's so gripy an with lots of rain coming down i dont even worry about slideing. @ $205 for 17's its a bit pricey the toyo 16's only cost me $165 its a big jump in price for one inch bigger rim delemas delemas

Nankang... they've done about 5,000kms, a track day of... "drift" (not overly, more grip sessions, but all 20min sessions and they still look and drive fine) have good grip in wet, and are... relative in the dry. HOWEVER, IMO all problems aside with every tyre I've ever tried is to do with varying power levels, driving conditions and how much abuse they sustain, also, suspension/braking and so on... as you can't really do a back to back test unless taking them to the track of a stack of lap and then comparing etc... SO there are a lot of variables when trying to compare tyres I think.

Cheers

Grant.

Just wanted to put a word in for the Bridgestone S-03s. These have done over 10,000 km on my car now and I just took them to a track day at Queensland Raceway where they did more than 30 laps (5 lap stints).

They're wearing ok (-1.5deg camber on the rear) and probably have about 5000km left in them, maybe more if I rotate them across the rear. They handled the track day well and didn't crap themselves though the front left looks a lot more average now than it did a week ago. :lol:

By lap 5 of each stint they were feeling a bit soggy but that's to be expected with a road tyre I guess.

I cannot say enough for these tyres in the dry, they are just so predictable and grippy. They're not so hot in the wet (sideways in 4th gear on the freeway, anyone?) but I am running about 240-ish rwkw with a 255mm width on the rear so they have their work cut out.

So yes they were freaking expensive but I'm not feeling overly ripped off. Next time I will probably try the Toyo T1Rs or those Revspec things (if I can find them) or maybe the Hankooks, but only if they're significantly cheaper than another set of S-03s. :(

Has anyone tried the S-03 vs something else?

hmm i thought primacy range were top of the list.. they are like 395bucks each tyre.. isnt that expensive..

I also have piolts hx on the fronts.. They are alright tyres as well, but they are getting really old, you can see marks on the tyres..

How much does the sport and the preceda cost?? Do they have more grip than primacy tyres??

hmm i thought primacy range were top of the list.. they are like 395bucks each tyre.. isnt that expensive..

I also have piolts hx on the fronts.. They are alright tyres as well, but they are getting really old, you can see marks on the tyres..

How much does the sport and the preceda cost?? Do they have more grip than primacy tyres??

nope just have a look on the michelin web site if u want more details. they are expensive but pilot sports are even more expensive :P and yes sports would have more grip for sure plus other sporty qualities.

Whoooohoooo :D

Just got my new T1R's on. I got 235/45ZR17 all round but found out i could have gotten 255 on the rear. The d@ckheads who serviced the car previously (before i owned it) had rotated the tyres. They put the 17x8 on the front and the 17x7 on the rear, thought it felt like crap.

Feels good so far but havent really tested them :D

The guy also mentioned that i should get a camber kit as one side is 1.3 and the other 2.

btw - Paying between 250-400 per tyres isn't exp to me, anything over that is though. Heard somone paid approx $800 per corner for pirelli 265/30's on 18 or 19 inch rims, no thats exp

:laugh: and yes sports would have more grip for sure plus other sporty qualities.

FUNNY - how so may I ask?? LOL

Just a point, I ran Pilot Sport for $220 (rear wheel, 17inch) on my Fireblade, and now run Pilot Power ($280). The Power is far superior to the Sport, and the Sport is a model that is around 3yrs old in the motorcycle industry... so maybe the Sport in car tyres is the older model, with Primecy being the latest model?

FUNNY - how so may I ask?? LOL

Just a point, I ran Pilot Sport for $220 (rear wheel, 17inch) on my Fireblade, and now run Pilot Power ($280). The Power is far superior to the Sport, and the Sport is a model that is around 3yrs old in the motorcycle industry... so maybe the Sport in car tyres is the older model, with Primecy being the latest model?

How so? well what i mean by sporty qualities is that they will last longer before turning to mush, grip more, and have stiffer sidewalls that improves grip and steering feel etc etc.

for cars its different, sport is the better one just look at the michelin website if u want to see for yourself :)

About to gat a set of 4 tyres, 235/45/17 for a budget of exactly $200 per corner.

Probably going to go the Hankook 104's for that price.... but what else compares to the 104's in regards to wet weather grip & matching price?

Cheers! :sorcerer:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...