Jump to content
SAU Community

Recommended Posts

Were you wanting tyres for more street or track? I just got KU31 and they are really nice tyres for the price, very grippy in dry conditions and not too bad in the wet. Most KU36 users have said they are very grippy in dry but really bad for wet weather driving

Were you wanting tyres for more street or track? I just got KU31 and they are really nice tyres for the price, very grippy in dry conditions and not too bad in the wet. Most KU36 users have said they are very grippy in dry but really bad for wet weather driving

Most KU36 users say they are fine in the wet. Noisy though.

Federal 595 RS-R semi-semi slick

215x45x17 got two delivered for $350

absolutely brilliant even when cold, when hot the grip is phenomenal.

federal 595 EVO, also brilliant, not as much heat required for them to stick but they put down 240kw in first gear fairly well barely spin at all

235x45x17 two delivered for $140 each I think

easily worth the price premium, go to option1garage to get them, no one else even comes close in price

KUMHO KU31

dry 9/10

wet 7/10

value 9/10

So a full slick would only rate 10% better than a plain old KU31? Poor ratings imo, not a bad tyre but the ratings do not reflect its performance against other tyres accurately.

lol I too would like to see the baseline/benchmark ratings for those scales...bald retreads @ 5/10 maybe?

I'm sure $500 a corner all season tyres are at the least twice as good as KU31 in the wet...

I need steerers for the front, it will be for a street car so i wont be going slicks, not to mention im on a budget.

its between the re001, ku36, or fed evo's.

Now i know the re001's are alot more expensive followed by the ku36's and the evo's are alot cheaper, but i've only heard good things about the evo's. So should i just go the evo's? or is it worth forking out the extra coin for the re001 or ku36's?

If there's anything else out there that should consider, let me know.

Thank you.

Yokohama Advan = Nice tyre but hard.

NEXEN = Shit unless you are daily driving it around.

Kumho = A great all rounder.

I have KU21's at the front and KU31's at the rear atm and will keep using them.

Car: R33 GTST (slightly above standard power) + Hicas

Driving style: kinda heavy 4 the street (no burnouts, just oversteer), no track ... yet

KU31'z on the back $245 each

Grip : 5/10 good 4 'normal' driving (wet or dry) slight second gear spin

Wear : dunno 3 weeks old

drift well, fairly 4giving BUT they HOWL like barstards as soon as you loose grip

Maxis MA-v1 on rear $225 each (6mths ago)

Grip: 5/10 Similar to the KU31z , a bit better straight line grip but a bit less in the corners ( & no howl). Give less grip while drifting than the Kumoz, so a little less 'confident'

Wear: 6/10 used 55-60% in 9 mths( on rear), now swaped 2 front

Maxis MA-v1 on front

Grip : 5/10 Grips fine, no understeer, However ABS seems 2 kick in kinda early ??

Wear : a lot slower now I suspect

Nankang somethings

Scary shit only good 4 burnouyts

0/10 ALL round

  • 2 weeks later...
KUMHO KU31

dry 9/10

wet 7/10

value 9/10

^^^ Dunno what that guy was smoking...

Have had KU31's on my mild GT-T for a couple of weeks now, i'd rate them as a cheap tyre that is better than average for all round street use.

In spirited driving they cant compare with the Toyo's i previously had on, but then again they're a shiteload cheaper.

For the price i paid and what my car is used for (daily - 30,000km+ a year) they're perfect.

dry 6/10

wet 5/10

value 9/10

  • 1 month later...

Hankook v12 ventus. $185 for 235/45r18

Not sure about a score out of 10 but they had more traction than Pirrelli Pzero rosso, Michelin Pilot, Bridgestone re001...

The best thing about these tyres is they still gripped while spinning where others would let go and i would just hit the limiter. They also would allow you to accelerate while powersliding. Felt great on the DECA skidpan.

Wear was slow also. Great street tyre imo.

Not sure how they would stack up on the track. I suspect that they would overheat and delaminate if pushed too hard.

My 2c.

I think using a number is retarded but here is my opinion anyway.

Federal 595-RSR semi-semi-slick

Traction is amazing, even when cold they are decent but when hot the grip is phenomenal, I was actually scared to push the limit as they raised the bar that much.

When about 50% worn (they are now) they become incredibly noisy when cold, take a corner normal speed and a horrid screeching until they get warm, bit of a downside.

Wore very very fast, only been 5000kms and they are at 50% already with daily driving and a few hills runs on the weekend, only had them on the front.

I got them for $300 delivered for 2x215x45x17 so it was a complete bargain, even for $190 each they would be worth it (normal price).

Federa 595-evo

Another great tyre that doesn't wear as fast, but not as much grip however they are basically the same cold and hot which is a bonus. Used these on the rear and they hookup 240kw in 1st gear most the time in my r32, spin and chirp a bit and will open up on rough road. Same deal in second, open up occasionally but hold traction pretty damn well.

Toyo R1-R 225/40/18, spent $350/corner from memory.

dry 9/10

wet 9/10

value 7/10

I've used the same tyres for 18 months (the car was off the road for half of that though), so i've put about 10,000km on them and they still look new.

Did a trackday with these too, nice for a couple of laps then they get pretty hot and slide around alot. But for a street tyre, without a doubt the best i've had. Really soft compound but like i said they still look new and still perform outstanding on the road in wet or dry, hard to push them to understeer or oversteer around roundabouts or tight turns they always do what is asked of them and stays planted - warm OR cold

didn't give them a 10, same thing with rating female, hard to give full points without knowing the whole field ;)

20863.jpg

chris

Toyo R1-R 225/40/18, spent $350/corner from memory.

dry 9/10

wet 9/10

value 7/10

I've used the same tyres for 18 months (the car was off the road for half of that though), so i've put about 10,000km on them and they still look new.

Did a trackday with these too, nice for a couple of laps then they get pretty hot and slide around alot. But for a street tyre, without a doubt the best i've had. Really soft compound but like i said they still look new and still perform outstanding on the road in wet or dry, hard to push them to understeer or oversteer around roundabouts or tight turns they always do what is asked of them and stays planted - warm OR cold

didn't give them a 10, same thing with rating female, hard to give full points without knowing the whole field ;)

20863.jpg

chris

Hmm very interesting, with treadwere of 140 is hard to believe they were still looking new after 10k. My back two were gone after 10k of daily use only, no track days and shit, on the other hand front two are still ok after 30k. BTW is great tyre and I'll keep using them as steering tyres and try RE001 for the back.

P.S I always thought with R1R or other semi-sliks as they get hotter grip and handling gets better.

your rears ran out 3 times faster than the fronts with general daily use? from camber wear/burnouts?

the tyres were good when warm but they're not a real semi r compound like the r888 is..

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The fab work can be as simple as a couple of silicon hoses and clamps to the factory piping. 
    • Just sounds like either way you need to do some fab work to get everything to fit, so why limit yourself at that point? If the GCG high flow option is zero effort in and out swap though I'd probably do that. It's almost certainly lowest risk, lowest cost, etc. The HKS GTIII-RS option that Kapr mentioned is laughably expensive for what it is, they charge the exact same for two turbos on the RB26 so their margins are off the charts on that thing.
    • Intake manifold is not a part of the issue. The turbo bolts to the exhaust manifold. That is easy. But close your eyes and picture the physical situation. That is a T3 flange on the manifold and a T3 flange on the turbo. As long as any new turbo has a T3 flange on the exhaust housing, that exhaust housing will bolt to the exhaust manifold. This places the exhaust housing in the same place as the stock one. But now move your mental attention a little further forward. The location of the compressor housing is set by the length of the turbo's core. The stock turbo had a long core. Let's say that it is..... 100mm long. So that would place the compressor housing 100mm forward of the exhaust housing. But a highflow, might well have a centre core that is shorter. Let's say that it is only 70mm long. Now the compressor housing will be 30mm further back in the engine bay than the stock one. This DOES move the turbo's compressor outlet backwards. It also moves the compressor's inlet backwards. You will very likely have to do some work to both the inlet and outlet piping to make everything connect again. I am not say this to make it out to be a bigger deal than it is. I am just pointing out that "bolt on" is sometimes not quite bolt on. The highflow from GCG that Murray linked above (https://gcg.com.au/turbo-charger-upgrade-skyline-gtst-2iu-xtrgts-s1.html ) uses a core that is the same length as the stock core, and so does not require this extra work. It will look very much like the stock turbo. No-one uses GTR turbos of any flavour (stock, or aftermarket) in a single turbo application on RB20/25. It's not a thing. Yes, people have been putting on GT3076, GTX3076 (and bigger and smaller versions of those) and G30s (of various sizes) onto RB20/25 since forever. But these are not "bolt on". Everything except the 4 bolts to the exhaust manifold change with these. And genuine Garretts are expensive. Non-gen, like Pulsar, etc, are cheaper, variously as good or nearly as good. But still not bolt on. No-one in the right mind would pay for an HKS turbo. Not in this modern day and age. Well, yes, the GCG highflow. You could ask HG what he can do to make the compressor housing sit in the original location. There are surely others doing highflows around the world. And some of the eBay/Temu ones (as reported by Dose) work and don't die. Bit of a lottery though. I would send your turbo to GCG (here in Oz) to be highflowed if you want a trivial no-extra-work option. But seriously, the work required to change inlet and outlet piping is not that hard. That's a boost control problem, not a turbo problem.
    • Thank you all for the replys 🙂 I know that intake would be different but that is one pipe at it is not that hard to get(custom one). I meant mainly bolt to the stock manifold and the turbo elbow. I looked and many sites/forums but they are just "old" with some old HKS turbos from GT-R i guess? What about some Garrets?  Or any other turbo? Is there even a turbo which i can just bolt on? 😄 And yeah i know about that new HKS but that is like 2000k USD without taxes/shipping in here   Iam getting a touch up tune but my "problem" is that on the "not" hot day iam getting peaks around 0,9 bar...and when it was around 15 Celsious i saw peak around 1 bar which is just too much for stock turbo. And of course turbo is old and i like to get some new one for a piece of mind 🙂 
    • I'm working on the assumption that our friend Jasmine here is a Russian (or, possibly Ukrainian) spammer/spambot, based purely on the number of such that I have been having to neuter in the last few weeks. IP address for the OP above was in WA. But that could have been via VPN. Posting at quarter to 4 in the morning is a good sign of being from somewhere in Europe. The last Jasmine that I kicked in the cooch was IP addressed in Ukraine. Even that could have been via VPN, and the bitchbot could have been from Russia, Serbia, China or anywhere. Regardless, was a spambot, so I killed it with fire. The fact that our new friend Jasmine here did not respond in any way to my tart query strongly suggests to me that this OP was just the establishment phase of a user able to be activated for spamming in a week, or 3 or 10.
×
×
  • Create New...