Jump to content
SAU Community

Recommended Posts

What street tyres do you use or have used before for your skyline? and how would u rate their performance & value for $ upon a score of 10? Some comments would be great...

Let me start the ball rolling :

Falken ZE326

Dry : 6.5/10

Wet : 3/10

Value for $ : 3/10

One of the worst tyres I have ever used. Was ok in the dry but had almost no grip in the wet. Terrible tyre for the price I paid. ($200 a piece, 235/45/17)

Bridgestone Potenza S-02

Dry : 8.5/10

Wet : 8.5/10

Value for $ : 8/10

Way better than the Falkens. Fantastic handling in dry & wet conditions. Too bad no longer produced.

I suppose the S-02 is now replaced by S-03

Dunlop SP-3000

Dry: 9/10

Wet: 8.5/10

Value for $: 8/10

Quite an expensive tyres when new, they cost about $600 each as I was told by workshop. I bought them 2nd hand with 80-90% thread left at almost nothing.

Lucky find.

Simex SM-8000

Dry: 7/10

Wet: 5/10

Value for $: 7/10

Cheap-ish tyre. You could virtually get them for free if you buy 2nd hand rims with them on it. Possibly not worth spending unless you're super tight on money or just getting basic tyres for compliance/selling a car. Wet handling is very bad, hardly any grip at all. Anyone with more than 140rwkw using this type of tyre better be very very careful driving it in the wet.

ZE326

Dry: 4/10

Wet: 2/10

Value for $: 5/10

Cheap tyre, you get what you pay for - crap.

Hankook K104

Dry: 8/10

Wet 7/10

Value: 10/10

Great road tyre for the money - around 1200 for a set of 255/35/18

Falken ZE326

Dry : 4/10

Wet : 4/10

Value for $ : 5/10

well they didn't kill me.. just.. wet and dry seemed about the same to me (equally dodgy)

Falken Azeni RT215's (older revision)

Dry : 8/10

Wet : 8/10

Value for $ : 8/10 (although purchased 2nd hand.. rrp is about $250ea. for 16's)

Bridgestone Potenza GIII

Dry : 7/10

Wet : 7/10

Value for $ : n/a (came on car)

Hancook K102's

Dry: 8/10

Wet: 8/10

Value for money: 9.5/10

They are down to 75% tread now and dont grip as new... but still well.

Yokohama Advan Neova (They were inported from Germany)

Dry: 9/10

Wet: 9/10

Value for money: (In my case: 20/10)

I got these 2nd hand... 2 had 100% tread - still had the spikey bits all over, and 2 were 99.9% tread - spikey thingies were worn down to little knobs....

225/50R16 for $90 each.

Once they got below 50% tread though they slipped pretty badly....

Wow I see a lot of 8-9 out of 10 here, and no offence but I think some of you guys need to try even better tyres.....of course the best tyres you've ever used will feel like a 8 or 9 if you haven't compared them to something better :thumbsup:

My pick of good street tyres are the Falken FK451 at about 450 in 255/40/18. Great tyres wet and dry. The Dunlop SP9000 we are running on the Z at the moment are good too, as they should be at 550ea.

My crap/not worth the money list include Falken 326, Falken ST115 and Bridgestone re040.

My R tyres list goes like this:

Bridgestone Re55 > Dunlop D01J > Yokohama A032R > Falken RS-V04 > Falken RT215

.....but Dunlop DZ02G > *

I must try some slicks so I can add them to the list :)

Did anyone see the tyre test in Motor magazine last month?

Wow I see a lot of 8-9 out of 10 here, and no offence but I think some of you guys need to try even better tyres.....of course the best tyres you've ever used will feel like a 8 or 9 if you haven't compared them to something better :)

My pick of good street tyres are the Falken FK451 at about 450 in 255/40/18.  Great tyres wet and dry.  The Dunlop SP9000 we are running on the Z at the moment are good too, as they should be at 550ea.

My crap/not worth the money list include Falken 326, Falken ST115 and Bridgestone re040.

My R tyres list goes like this:

Bridgestone Re55 > Dunlop D01J > Yokohama A032R > Falken RS-V04 > Falken RT215

.....but Dunlop DZ02G > *

I must try some slicks so I can add them to the list :)

Did anyone see the tyre test in Motor magazine last month?

Well one thing's for sure : everyone agrees the Falken Ziex ZE326 sucks to the max!!

And yeah, I guess until we try better tyres, we might think the ones we have are that good.

Duncan, can u explain what's wrong with the ST115 & Bridgestone RE040? From what i know, they're pretty expensive to buy. :thumbsup:

Duncan, can u explain what's wrong with the ST115 & Bridgestone RE040? From what i know, they're pretty expensive to buy.  :thumbsup:

Yeah that is what pissed me off. Sometimes in life you can just spend more and be pretty sure you will get a better product....not so for tyres....

Both tyres had poor grip considering their price, the st115 were worse than the re040s. They may be better than some other middle of the range tyres but they are not worth the money IMHO.

Threads like this can be great to get other options instead of listening to what the bloke across they tyre counter is trying to move from their stock room :)

Good stuff.

Next tyres I'll be getting the 104's .. considering I'm no track warrior I'll stick with my nankangs now.

nankang something

dry 6/10

wet 4/10

value 8/10

federals

dry 1/10

wet ?/10

value 2/10

(flatmates skyline.. duhhh waste)

lol...Federals in the wet... better be paying attention!

in the dry they grip okay if you want to go in a straight line... forget about corners... make lots of smoke though:)

michelin pilot sports get my vote, even when secondhand they run rings around the Federals (thanks ZigenGT)

I've been really impressed with Hankook’s, have been driving them really hard for the better half of a year and they’ve lasted outstandingly. A whole heap of grip and are surprisingly sticky.. surely there are always going to better/more expensive (and softer for that matter – wear out faster). Worth considering for good street use.

Also, my old 33 gtst used to Severely waste tires because It had aftermarket coilovers (teins – which were excellent for spirited driving!) and the tires would die easily on the outer side. Should have forked out for a chamber kit. Thank god the 32 with Ohlins doesn’t seem to be as bad as the 33.

Falken Ziex 326

wet:1/10

dry:1/10

Maybe the one I got was faulty. I had 235/40/18s at the front and 265/35s at the rears.

No grip (especially in the wet), very noisy. I had steering wheel vibration at 100-110 kph.

Toyo TPGs

wet and dry quite pleased with them so far...and the vibration was completely gone

Another thing to ask is with all those rating out of 10, what's your rwkw power?

A cheapo non-grippy tyre can be rated as having excellent grip on a 60rwkw car,

while even a very good tyres that grips well on a 180rwkw will be practically useless when fitted to a 260rwkw car.

Read the May Wheels last night and they also did a tyre test.

I'll post more detailed findings when I get home but what stood out in my mind was the tyre that they rated third out of about 7 or 8 I think was the cheapest out of all. Cant think of its name but it starts with M. Mirrza - Mizza something like that.

Interestingly, second overall was the michelin which did not win any of there controlled tests but stayed consistent over all of them.

This test was on 235/45 R17s.

Falken Ziex 326

wet:1/10

dry:1/10

I used these for a while.. Horrible tyres.. I would agree with your rating.. They just had no grip!

I have Dunlop Lemans tyres on at the moment.. They have pritty good grip but just dont allow me to put my foot down and under heavy breaking they dont grip and just want to lock up.

Dunlop Lemans

Dry: 4/10

Wet: 4/10

Falkien Semi Slicks (forgot the code)

dry: 7/10

wet: ?/10 (never drove in the wet with them)

Once warm they where okay, good grip through the twisties.

I agree with what duncan posted up above.. I dont think many of us have tried out really really decent tyres.. (ie.. 500+ each)

Nenxen Compliance tyres

Dry: 0/10

Wet: 0/10

Symex Compliance tyres

Dry: 4/10

Wet: 2/10

These tyres lasted 7 trackdays at eastern creek.. I dont think they where good for my driving as using dodgy tires makes you to aggressive with the wheel.. not a good habit to get.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...