Jump to content
SAU Community

Recommended Posts

  • 10 months later...

It doesnt matter. Its just flowing through it.

Id probly put it in at the top, being pedantic and thinking that it might be easier on the oil pump lol. But either way, it will be at XPsi once its built pressure, so if its already running dont worry about it.

  • 3 months later...

Just abit confused on something.

Sorry i'm new to this oil cooler stuff.

Im going to get a DEFI DIN gauge peice and also looking at getting a Greddy Oil Cooler. Something like this for my R32 gtr. http://www.ebay.com.au/itm/Greddy-Trust-Oil-Cooler-Kit-Nissan-Skyline-GT-R-R32-/170813641917?pt=AU_Car_Parts_Accessories&hash=item27c54954bd

Can someone please explain how id run it ? What hose goes to what and what adapter goes to what... This link has some difference peices that are confusing me to the pictures posted on page 1..

Sorry about the anoying question but id really appreciate it if someone can help me out .

Damn the RB26 and the lack of space.

Anybody uses a simple sandwich plate without the relocation kit on the RB26 - would love to see your installation pics.

Got a 10-row cooler and this adapter - hoses and connectors will be purchased later on, when I figure out where to mount the core - there just is stuff all room - even a drivers guard is full of hoses and bov's(I think) - passenger side guard seems so far away.

Would appreciate R33 GT-R installation pics.

post-62747-0-66574600-1336037913_thumb.jpg

  • 1 year later...
  • 8 months later...

It is a good idea to disconnect the ignitor or coil packs and crank the engine a bit to get oil through it. Remember not to continuously crank it for too long or you will fry the starter. 20 seconds on and 20 seconds off is fairly safe

My cooler is setup nearly exactly the same as John's. I havent seen that bracket on many 33's. I had to drill a hole in my carbon cooling panel for the top stud/nut so not really sure if this is standard or what

20131107_181228_zps8faf2d18.jpg

It is a good idea to disconnect the ignitor or coil packs and crank the engine a bit to get oil through it. Remember not to continuously crank it for too long or you will fry the starter. 20 seconds on and 20 seconds off is fairly safe

^ Thanks for that.

I mounted my oil cooler on the weekend. Will just need to find time to connect up all the lines and finish it off.

12061794176_ee81768035_c.jpg

12061789846_029fa788d1_c.jpg

  • 4 weeks later...

Bit of a noob question here. So in the photo of the kit there are three hoses.

My understanding is that one hose connects the adaptor to the remote filter (So oil out of the block to the filter)

Then one hose goes from the filter to the cooler

Then one hose goes from the cooler back to the block

Is my understanding correct?

Cheers for the write up

Bit of a noob question here. So in the photo of the kit there are three hoses.

My understanding is that one hose connects the BLOCK adaptor to the remote filter (So oil out of the block to the filter) - YES

Then one hose goes from the filter to the cooler - YES

Then one hose goes from the cooler back to the block ADAPTER - YES

Is my understanding correct?

Cheers for the write up

Your understanding is correct!

Just ensure you get the correct hose orientation on the block adapter and the remote filter adapter.

I can't remember the orientation, but see the diagrams on page 1. I got them wrong first time around.

Cheers

Your understanding is correct!

Just ensure you get the correct hose orientation on the block adapter and the remote filter adapter.

I can't remember the orientation, but see the diagrams on page 1. I got them wrong first time around.

Cheers

Thanks mate, So you mean ensure that the IN and OUT fittings on the adaptor match the same on the filter yeah?

Cheers again

Use bulkhead fittings to go from engine bay to outside, means you have to buy some extra ends for the braided line, but prevents rubbing and having to cut holes (or run the lines further to existing openings)

Mine are run with short braid from the oil cooler sandwich plate, to hardlines that go along the chassis rail to bulkhead fittings at the front to 2 more small braided lines to the cooler itself. The hardlines were free, and not completely necessary, but they just prevent things rubbing and look pretty neat

Bulkhead Fittings : Mine are ones for hydraulic hoses so are steel instead of aluminium. Might be cheaper for steel ones. Pirtek or any hydraulic hose shop should have them

Edited by 89CAL

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...